Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(Created page with "Text... ===Related articles === * AlphaWeb - Getting started (practice) Category: AlphaCom practice") |
(→Related articles) |
||
(36 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | + | [[File:EX1-1b.PNG|left|thumb|600px|System configuration]] | |
+ | <br style="clear:both;" /> | ||
+ | __NOTOC__ | ||
− | === | + | ===PC Settings=== |
− | * [[AlphaWeb | + | *Configure your computer to have IP address 169.254.1.1 |
+ | *Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable | ||
+ | |||
+ | ===Login=== | ||
+ | *Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5 | ||
+ | *Default username: '''''admin''''' | ||
+ | *default password: '''''alphaadmin''''' | ||
+ | |||
+ | ===Configure Ethernet port 1=== | ||
+ | *In AlphaWeb go to ''System Configuration -> Interfaces'' | ||
+ | *Set the IP address on eth1 to 10.1.10.1/16 (...<u>/16</u> means Subnet Mask = 255.255.0.0) | ||
+ | *Press ''Validate'', then ''Save & Apply'' | ||
+ | [[File:1-1b solution.PNG|500px|thumb|left|AlphaWeb: System Configuration > Interfaces]] | ||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | ===Configure filters=== | ||
+ | *In AlphaWeb go to ''System Configuration > Filters'' | ||
+ | *For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro | ||
+ | *Press ''Save'' | ||
+ | *Press ''Apply'' | ||
+ | *Press ''Yes'' | ||
+ | [[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration > Filters]] | ||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | ===Access AlphaWeb via Eth 1 === | ||
+ | *Configure your computer to have IP address 10.1.10.90 | ||
+ | *Connect the PC to the ethernet port 1 of the AlphaCom | ||
+ | * Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser | ||
+ | |||
+ | |||
+ | <br><br><br><br> | ||
+ | ---- | ||
+ | ===Related articles === | ||
+ | * [[1-1b. AlphaWeb - Getting started (practice)]] | ||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] |
Latest revision as of 10:03, 30 June 2022
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure Ethernet port 1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1/16 (.../16 means Subnet Mask = 255.255.0.0)
- Press Validate, then Save & Apply
Configure filters
- In AlphaWeb go to System Configuration > Filters
- For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro
- Press Save
- Press Apply
- Press Yes
Access AlphaWeb via Eth 1
- Configure your computer to have IP address 10.1.10.90
- Connect the PC to the ethernet port 1 of the AlphaCom
- Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser