Actions

Difference between revisions of "1-3a. IP Stations – Master Stations (solution)"

From Zenitel Wiki

(→‎Configure the IP Stations)
(→‎Related articles)
 
(18 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
[[File:1-3a config.PNG|left|thumb|500px|System configuration]]
+
[[File:1-3a config.PNG|left|thumb|450px|System configuration]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
__NOTOC__
 
__NOTOC__
  
 
=== Configure the IP Stations ===
 
=== Configure the IP Stations ===
 +
==== IP Flush Master station ====
 
* Connect the IP Flush Master station to the PoE switch
 
* Connect the IP Flush Master station to the PoE switch
 
* Select '''Setup''' to enter the off-line menu. Password: 1851
 
* Select '''Setup''' to enter the off-line menu. Password: 1851
 
* Step to the menu selection '''IP Settings''' and enter the following parameters (''IPgw'' is not relevant here):
 
* Step to the menu selection '''IP Settings''' and enter the following parameters (''IPgw'' is not relevant here):
−
[[File:1-3a solution1.png|thumb|left|300px|Off-line menu: IP settings]]
+
[[File:1-3a solution1.png|thumb|left|250px|Off-line menu: IP settings]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
−
* '''Save'''. When asked for "Restart now" you can select "No".  
+
* When prompted, '''Save''' the changes. When asked for "Restart now" you can select "No".  
 
* Step to the menu selection '''AlphaCom IP''' and enter the following parameters:
 
* Step to the menu selection '''AlphaCom IP''' and enter the following parameters:
−
[[File:1-3a solution2.png|thumb|left|300px|Off-line menu: AlphaCom settings]]
+
[[File:1-3a solution2.png|thumb|left|250px|Off-line menu: AlphaCom settings]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
* When prompted, '''Save''' the changes.
 +
* Step to the menu selection '''Restart''' and activate a restart of the station
  
 +
 +
==== IP Desktop station ====
 +
* Connect the IP Desktop station to the PoE switch
 +
* Select '''Setup''' to enter the off-line menu. Password: 1851
 +
* Step to the menu selection '''IP Settings''' and enter the following parameters (''IPgw'' is not relevant here):
 +
[[File:1-3a solution3.png|thumb|left|250px|Off-line menu: IP settings]]
 +
<br style="clear:both;" />
 +
* When prompted, '''Save''' the changes. When asked for "Restart now" you can select "No".
 +
* Step to the menu selection '''AlphaCom IP''' and enter the following parameters:
 +
[[File:1-3a solution4.png|thumb|left|250px|Off-line menu: AlphaCom settings]]
 +
<br style="clear:both;" />
 +
* When prompted, '''Save''' the changes.
 +
* Step to the menu selection '''Restart''' and activate a restart of the station
 +
<br><br>
 
===Configure the AlphaCom XE===
 
===Configure the AlphaCom XE===
 
*In AlphaPro go to '''Users & Stations''', and select physical number 37; 137 Station 37  
 
*In AlphaPro go to '''Users & Stations''', and select physical number 37; 137 Station 37  
 
*Use the section on the right and change the configuration as follows:
 
*Use the section on the right and change the configuration as follows:
−
[[File:1-2a solution.PNG|400px|thumb|left|AlphaPro: Users & Stations]]
+
[[File:1-3a solution5.png|thumb|left|400px|AlphaPro: Users & Stations window]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
* Send the changes to the AlphaCom
+
*In AlphaPro go to '''Users & Stations''', and select physical number 38; 138 Station 38
−
* Check that the display on the station shows the correct number and name<br><br>
+
*Use the section on the right and change the configuration as follows:
−
 
 
−
===DAK keys===
 
−
*In AlphaPro go to '''Users & Stations''' and select physical number 3
 
−
*Click the '''DAK''' button in the lower left corner
 
−
* Select the '''DAK 1-10''' tab, and insert the following:
 
−
[[File:1-2a solution2.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK]]
 
−
<br style="clear:both;" />
 
  
−
*Press DAK1 and observe that 416 Reception is called
+
[[File:1-3a solution6.png|thumb|left|400px|AlphaPro: Users & Stations window]]
−
*Press DAK2 and observe that 6540 T. Edison is called
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
=== Additional information ===
+
* Send the changes to the AlphaCom XE
−
When selecting Station Type = DualDisplay, the Navigation keys below the display are automatically configured. You can view the navigation key programming by selecting Users & Stations -> DAK -> Navig. Keys tab
+
[[File:SendChg.PNG|400px]]
−
*Check that key 1-4 are:
 
−
**I60  ''(Info menu)''
 
−
**I9543  ''(Page UP)''
 
−
**I9544  ''(Page DOWN)''
 
−
**I9542  ''(Menu)''
 
−
[[File:1-2a solution4.PNG|thumb|left|300px|Navigation keys]]
 
−
<br style="clear:both;" />
 
−
[[File:1-2a solution3.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK -> Navig keys]]
 
−
<br style="clear:both;" />
 
  
 +
=== Troubleshooting ===
 +
* If the IP station does not register, check the following:
 +
** In AlphaWeb, System Configuration -> Filters, verify that port for '''IP Stations''' and '''VoIP Audio''' is enabled
 +
** In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for the IP stations (or Free license)
 
<br><br><br><br>
 
<br><br><br><br>
  
Line 52: Line 56:
 
===Related articles ===
 
===Related articles ===
 
* [[1-3a. IP Stations – Master Stations (practice)]]
 
* [[1-3a. IP Stations – Master Stations (practice)]]
 +
 +
[[Category: AlphaCom practice]]

Latest revision as of 10:04, 30 June 2022

System configuration



Configure the IP Stations

IP Flush Master station

  • Connect the IP Flush Master station to the PoE switch
  • Select Setup to enter the off-line menu. Password: 1851
  • Step to the menu selection IP Settings and enter the following parameters (IPgw is not relevant here):
Off-line menu: IP settings


  • When prompted, Save the changes. When asked for "Restart now" you can select "No".
  • Step to the menu selection AlphaCom IP and enter the following parameters:
Off-line menu: AlphaCom settings


  • When prompted, Save the changes.
  • Step to the menu selection Restart and activate a restart of the station


IP Desktop station

  • Connect the IP Desktop station to the PoE switch
  • Select Setup to enter the off-line menu. Password: 1851
  • Step to the menu selection IP Settings and enter the following parameters (IPgw is not relevant here):
Off-line menu: IP settings


  • When prompted, Save the changes. When asked for "Restart now" you can select "No".
  • Step to the menu selection AlphaCom IP and enter the following parameters:
Off-line menu: AlphaCom settings


  • When prompted, Save the changes.
  • Step to the menu selection Restart and activate a restart of the station



Configure the AlphaCom XE

  • In AlphaPro go to Users & Stations, and select physical number 37; 137 Station 37
  • Use the section on the right and change the configuration as follows:
AlphaPro: Users & Stations window


  • In AlphaPro go to Users & Stations, and select physical number 38; 138 Station 38
  • Use the section on the right and change the configuration as follows:
AlphaPro: Users & Stations window


  • Send the changes to the AlphaCom XE

SendChg.PNG

Troubleshooting

  • If the IP station does not register, check the following:
    • In AlphaWeb, System Configuration -> Filters, verify that port for IP Stations and VoIP Audio is enabled
    • In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for the IP stations (or Free license)





Related articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=1-3a._IP_Stations_–_Master_Stations_(solution)&oldid=229858"