Difference between revisions of "WK20 - 20W Power Amplifier"
From Zenitel Wiki
(→Connectors and Switches) |
|||
| (14 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Image: | + | [[Image:1000614100.PNG|thumb|300px|WK20- 20 watt amplifier]] |
| − | + | ==Highlights== | |
| − | + | *Designed to amplify the audio of an ASLT subscriber line | |
| − | * Designed to amplify the audio of an ASLT subscriber line | + | *Can be used standalone (speaker only), or in combination with a station to amplify the speaker signal |
| − | * Can be used standalone (speaker only), or in combination with a station to amplify the speaker signal | + | *Connects directly to the ASLT subscriber line |
| − | * Connects directly to the ASLT subscriber line | + | *Provides 20 Watt into 4 Ohm, 12 Watt into 8 Ohm, or 6 Watt into 20 Ohm |
| − | * Provides 20 Watt into 4 Ohm or 6 Watt into 20 Ohm | + | *Powered by 24VAC transformer or 24-36VDC power supply |
| − | * Powered by 24VAC transformer or 24-36VDC power supply | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Connectors and Switches== | ==Connectors and Switches== | ||
| − | [[Image:FIG WK20.PNG|left|600px|thumb| | + | [[Image:FIG WK20.PNG|left|600px|thumb|''Connectors and switches on Power Amplifier'']] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | == WK20 and IP Stations == | + | {{Note| There is no polarity requirement on the power input when using either 24vAC or 24-36vDC. A diode bridge provides for connection of supply in either polarity.}} |
| + | |||
| + | ==WK20 and IP Stations== | ||
The amplifier can also be used with IP stations, connecting the line output of the IP station to the input of amplifier. Note that when used with IP stations the output power will be less than specified in the table below, because the input of the amplifier is designed for ASLT line levels (2.2 volt nominal, max 8 volts) and the line level from the IP stations is 0dBm signal (approx. 0.77 volts). | The amplifier can also be used with IP stations, connecting the line output of the IP station to the input of amplifier. Note that when used with IP stations the output power will be less than specified in the table below, because the input of the amplifier is designed for ASLT line levels (2.2 volt nominal, max 8 volts) and the line level from the IP stations is 0dBm signal (approx. 0.77 volts). | ||
| − | == | + | ==Related articles== |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | *[[IP Substation - Amplified calling]] | |
| − | * [[IP Substation - Amplified calling]] | + | *[[WK20 - Applications]] |
| − | * [[WK20 - Applications]] | + | *[http://www.zenitel.com/product/wk20 Additional Documentation on Zenitel.com] |
| − | [[Category:Public Address | + | [[Category:Public Address - Analog amplifiers]] |
| − | |||
[[Category:Additional equipment]] | [[Category:Additional equipment]] | ||
Latest revision as of 12:27, 5 July 2022
Highlights
- Designed to amplify the audio of an ASLT subscriber line
- Can be used standalone (speaker only), or in combination with a station to amplify the speaker signal
- Connects directly to the ASLT subscriber line
- Provides 20 Watt into 4 Ohm, 12 Watt into 8 Ohm, or 6 Watt into 20 Ohm
- Powered by 24VAC transformer or 24-36VDC power supply
Connectors and Switches
|
There is no polarity requirement on the power input when using either 24vAC or 24-36vDC. A diode bridge provides for connection of supply in either polarity. |
WK20 and IP Stations
The amplifier can also be used with IP stations, connecting the line output of the IP station to the input of amplifier. Note that when used with IP stations the output power will be less than specified in the table below, because the input of the amplifier is designed for ASLT line levels (2.2 volt nominal, max 8 volts) and the line level from the IP stations is 0dBm signal (approx. 0.77 volts).