Difference between revisions of "TFIX Restore Factory Defaults"
From Zenitel Wiki
(→Reset to Factory Default Settings with Static IP) |
|||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
A Turbine EX Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | A Turbine EX Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | ||
| − | + | {{note|Factory Default of the TFIX station will also reset the Flowire NMK password. See [[Flowire_clusters#Setting_the_NMK_in_an_installation_with_TFIX_stations|here for more]]}} | |
| − | =Reset to Factory Default Settings with Activated DHCP= | + | = Reset to Factory Default Settings with Activated DHCP = |
[[File:TFIX SpeakeIP 1.png|thumb|130px|Factory Default with IP address from DHCP server]] | [[File:TFIX SpeakeIP 1.png|thumb|130px|Factory Default with IP address from DHCP server]] | ||
| + | <div style="text-align:left;"> <youtube width="300" height="180">6Kph8SmbYYc</youtube> </div> | ||
| + | <br><br> | ||
| + | __NOTOC__ | ||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station. | :1. While '''pressing any button''', power up the station. | ||
| Line 12: | Line 15: | ||
:4. Press the '''call button''' to make the station say its IP address. | :4. Press the '''call button''' to make the station say its IP address. | ||
| − | + | == Factory default values == | |
| − | :Station IP address: | + | :Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address. |
:Username: '''admin''' | :Username: '''admin''' | ||
:Password: '''alphaadmin''' | :Password: '''alphaadmin''' | ||
| Line 19: | Line 22: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | =Reset to Factory Default Settings with Static IP= | + | = Reset to Factory Default Settings with Static IP = |
[[File:TFIX SpeakeIP 2.png|thumb|130px|Factory Default with Static IP Address]] | [[File:TFIX SpeakeIP 2.png|thumb|130px|Factory Default with Static IP Address]] | ||
| + | |||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station. | :1. While '''pressing any button''', power up the station. | ||
| Line 28: | Line 32: | ||
:4. Press the '''call button''' to make the station say its IP address. | :4. Press the '''call button''' to make the station say its IP address. | ||
| − | + | == Factory default values == | |
:Station IP address: '''169.254.1.100''' | :Station IP address: '''169.254.1.100''' | ||
:Username: '''admin''' | :Username: '''admin''' | ||
Latest revision as of 11:23, 24 October 2023
A Turbine EX Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
|
Factory Default of the TFIX station will also reset the Flowire NMK password. See here for more |
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin