Actions

Difference between revisions of "RTSP Settings"

From Zenitel Wiki

(Audio and Video Streaming)
(Authentication)
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{AEIS}}
 
{{AEIS}}
Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Turbine stations support RTSP version 1.0 defined in [https://tools.ietf.org/html/rfc2326 RFC 2326].<br>
+
'''Real Time Streaming Protocol (RTSP)''' is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Turbine stations support RTSP version 1.0 defined in [https://tools.ietf.org/html/rfc2326 RFC 2326].<br>
All Turbine devices support audio streaming over RTSP. Turbine video stations (TxIV-x) additionally support video streaming over RTSP.
+
All Turbine devices support audio streaming over RTSP. Zenitel video stations additionally support video streaming over RTSP.
  
 
== Software requirements ==
 
== Software requirements ==
 
RTSP streaming is supported as from Turbine software version 4.11
 
RTSP streaming is supported as from Turbine software version 4.11
  
 +
== Authentication ==
 +
Authentication is required.
 +
 +
The username and password of the device must be included in the url, e.g.: rtsp://'''<username>:<password>@'''10.5.102.106:554...''
 +
*Example: rtsp://'''admin:alphaadmin@'''10.5.102.106:554/media/''
 
__FORCETOC__
 
__FORCETOC__
  
 
== Audio Streaming==
 
== Audio Streaming==
Configuration of Audio Streaming from Non-video intercom devices is done from the '''RTSP and ONVIF''' menu:
+
Configuration of Audio Streaming from Non-video intercom devices is done from the '''RTSP and ONVIF''' menu in the web interface of the device:
[[File:RTSP nonvideo.png|thumb|left|700px|RTSP settings - Non-Video Intercom]]
+
[[File:RTSP Settings Audio.PNG|thumb|left|700px|RTSP url - Non-Video Intercom]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
* '''Audio source''' - defines when acoustic echo canceler is applied to mic+speaker voice. With this setting, it is possible to choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent to the RTSP stream. Options are:
 
* '''Audio source''' - defines when acoustic echo canceler is applied to mic+speaker voice. With this setting, it is possible to choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent to the RTSP stream. Options are:
 
** '''Mic before AEC''' - Both microphone and speaker signals are sent out to RTSP stream
 
** '''Mic before AEC''' - Both microphone and speaker signals are sent out to RTSP stream
 
** '''Mic after AEC''' -  Only microphone signal is sent out to RTSP stream
 
** '''Mic after AEC''' -  Only microphone signal is sent out to RTSP stream
 
The username and password of the device must be added to the url. E.g.: rtsp://'''admin:alphaadmin@'''10.5.102.106:554/media/.
 
  
 
<br>
 
<br>
Line 22: Line 25:
 
== Audio and Video Streaming==
 
== Audio and Video Streaming==
 
=== Default RTSP url ===
 
=== Default RTSP url ===
The URL used for Audio and Video Streaming from a Video intercom device is displayed in the '''Video''' menu (Edge and SIP mode) or the '''Video Settings''' menu (ICX-AlphaCom mode):
+
The URL used for Audio and Video Streaming from a Video intercom device is displayed in the '''Video Settings''' menu:
 
[[Image:RTSP Default URL.PNG|thumb|left|700px|Default RTSP url - Video intercom]]
 
[[Image:RTSP Default URL.PNG|thumb|left|700px|Default RTSP url - Video intercom]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Line 28: Line 31:
  
 
===RTSP url generator===
 
===RTSP url generator===
The RTSP url generator allows to configure and use custom RTSP URL. The custom RTSP URL can be used in parallel with the default RTSP url, but will have a different configuration than the default one
+
An RTSP url generator is available from the '''Advanced Video Settings''' menu. The RTSP url generator allows to configure and use custom RTSP url. The custom RTSP url can be used in parallel with the default RTSP url, but will have a different configuration than the default one
 
* '''Encoder''' - which encoder will be used for the video stream, options are H264 and MJPEG
 
* '''Encoder''' - which encoder will be used for the video stream, options are H264 and MJPEG
 
* '''Resolution''' - Sets the pixel resolution, options are. Supports 240p, 480p, 720p (H264 only) and 1080p (H264 only).
 
* '''Resolution''' - Sets the pixel resolution, options are. Supports 240p, 480p, 720p (H264 only) and 1080p (H264 only).
Line 34: Line 37:
 
* '''Bitrate (H264 only)''' - Sets the bitrate which will be used in video stream. Options are 128, 300, 500, 1000, 1500, 2500, 5000 and 7000kb/s
 
* '''Bitrate (H264 only)''' - Sets the bitrate which will be used in video stream. Options are 128, 300, 500, 1000, 1500, 2500, 5000 and 7000kb/s
  
Click the '''Copy URI''' button to copy the generated URI.
+
Click the '''Copy URI''' button to copy the generated URI to the clipboard of your laptop.
  
 
[[Image:RTSP Settings Video.PNG|thumb|left|700px|RTSP settings - Video intercom]]
 
[[Image:RTSP Settings Video.PNG|thumb|left|700px|RTSP settings - Video intercom]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
The username and password of the device must be added to the url. E.g.: rtsp://'''admin:alphaadmin@'''10.9.5.143:554/media?encoder=H264&resolution=1080P&fps=25&bitrate=2500
 
  
  
 
[[Category: Video]]
 
[[Category: Video]]
 
[[Category:ONVIF]]
 
[[Category:ONVIF]]

Revision as of 14:48, 17 January 2024

AEIS.png

Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Turbine stations support RTSP version 1.0 defined in RFC 2326.
All Turbine devices support audio streaming over RTSP. Zenitel video stations additionally support video streaming over RTSP.

Software requirements

RTSP streaming is supported as from Turbine software version 4.11

Authentication

Authentication is required.

The username and password of the device must be included in the url, e.g.: rtsp://<username>:<password>@10.5.102.106:554...

  • Example: rtsp://admin:alphaadmin@10.5.102.106:554/media/


Audio Streaming

Configuration of Audio Streaming from Non-video intercom devices is done from the RTSP and ONVIF menu in the web interface of the device:

RTSP url - Non-Video Intercom


  • Audio source - defines when acoustic echo canceler is applied to mic+speaker voice. With this setting, it is possible to choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent to the RTSP stream. Options are:
    • Mic before AEC - Both microphone and speaker signals are sent out to RTSP stream
    • Mic after AEC - Only microphone signal is sent out to RTSP stream


Audio and Video Streaming

Default RTSP url

The URL used for Audio and Video Streaming from a Video intercom device is displayed in the Video Settings menu:

Default RTSP url - Video intercom



RTSP url generator

An RTSP url generator is available from the Advanced Video Settings menu. The RTSP url generator allows to configure and use custom RTSP url. The custom RTSP url can be used in parallel with the default RTSP url, but will have a different configuration than the default one

  • Encoder - which encoder will be used for the video stream, options are H264 and MJPEG
  • Resolution - Sets the pixel resolution, options are. Supports 240p, 480p, 720p (H264 only) and 1080p (H264 only).
  • Frames per second - sets the framerate per second. Options are 5fps, 10fps, 15fps (H264 only) , 25fps (H264 only) and 30fps (H264 only)
  • Bitrate (H264 only) - Sets the bitrate which will be used in video stream. Options are 128, 300, 500, 1000, 1500, 2500, 5000 and 7000kb/s

Click the Copy URI button to copy the generated URI to the clipboard of your laptop.

RTSP settings - Video intercom