Difference between revisions of "Permanent Audio Stream"
From Zenitel Wiki
| Line 12: | Line 12: | ||
| + | |||
| + | |||
| + | |||
| + | ---- | ||
[[File:PermanentAudio.png|thumb|500px|left|Permanent Audio configuration page]] | [[File:PermanentAudio.png|thumb|500px|left|Permanent Audio configuration page]] | ||
<br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | <br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | ||
Revision as of 12:58, 27 September 2024
Permanent Audio Stream (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec.
The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/zForm_stream_config
It is possible to configure the PAS to transmit RTP audio only during a call.
It is also possible to make only calls created using specified DAKs enable the stream in SIP mode.
Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
|
In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+ |