Zenitel IP Speaker connectors: Difference between revisions
From Zenitel Wiki
(Created page with "{{AEIS}} <br clear=all/> __NOTOC__ thumb|left|500px <br clear=all/> {| border="1" } | align="center" style="background:#ffd400;" |'''Pin''' | al...") |
No edit summary |
||
| Line 40: | Line 40: | ||
{{Note| | {{Note| | ||
* Relay switching capacity: Max. 9 watt (Max voltage: 60VAC/60VDC. Max current: 160mA) | * Relay switching capacity: Max. 9 watt (Max voltage: 60VAC/60VDC. Max current: 160mA) | ||
* The 5V output can deliver | * The 5V output can deliver TBA mA current maximum}} | ||
<br clear=all/> | <br clear=all/> | ||
[[Category: Turbine Connections]] | [[Category: Turbine Connections]] | ||
Revision as of 10:20, 6 January 2025
| Pin | Description | Comment |
| 1¹ | GPIO | General Purpose In Out |
| 2¹ | 5V+ | 5 volt output |
| 3¹ | Ext speaker (8ohm) | Connection for external 8 ohm loudspeaker (positive connector) |
| 4¹ | Ext speaker (8ohm) | Connection for external 8 ohm loudspeaker (negative connector) |
| 5¹ | Int speaker (8ohm) | Connection for internal 8 ohm loudspeaker (positive connector) |
| 6¹ | Int speaker (8ohm) | Connection for internal 8 ohm loudspeaker (negative connector) |
| 7 | Relay CO | Relay output, Common |
| 8 | Relay NO | Relay output, Normal Open |
| 9 | Line in/Mic | Audio input (positive connector) |
| 10 | Line in/Mic | Audio input (negative connector) |
| 11 | GND | Ground connector |
|
¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
|
|