Zenitel IP Speaker connectors: Difference between revisions

Revision as of 14:23, 13 January 2025

Pin	Description	Comment
1¹	GPIO	General Purpose In Out
2¹	5V+	5 volt output
3¹	Ext speaker (8ohm)	Connection for external 8 ohm loudspeaker
4¹	Ext speaker (8ohm)	Connection for external 8 ohm loudspeaker
5¹	Int speaker (8ohm)	Connection for internal 8 ohm loudspeaker
6¹	Int speaker (8ohm)	Connection for internal 8 ohm loudspeaker
7	Relay CO	Relay output, Common
8	Relay NO	Relay output, Normal Open
9	Line in/Mic	Audio input (positive)
10	Line in/Mic	Audio input (negative)
11	GND	Ground connector

¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

Relay switching capacity: Max. 9 watt (Max voltage: 60VAC/60VDC. Max current: 160mA)
The 5V output can deliver TBA mA current maximum

@@ Line 15: / Line 15: @@
 | 2¹ || 5V+ || 5 volt output
 |-
-| 3¹ || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker (positive connector)
+| 3¹ || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker
 |-
-| 4¹ || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker (negative connector)
+| 4¹ || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker
 |-
-| 5¹ || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker (positive connector)
+| 5¹ || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker
 |-
-| 6¹ || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker (negative connector)
+| 6¹ || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker
 |-
 | 7 || Relay CO || Relay output, Common
@@ Line 27: / Line 27: @@
 | 8 || Relay NO || Relay output, Normal Open
 |-
-| 9 || Line in/Mic || Audio input (positive connector)
+| 9 || Line in/Mic || Audio input (positive)
 |-
-| 10 || Line in/Mic || Audio input (negative connector)
+| 10 || Line in/Mic || Audio input (negative)
 |-
 | 11 || GND || Ground connector