Press and Hold Time (Zenitel Connect Pro): Difference between revisions
From Zenitel Wiki
Created page with "Defines the number of seconds a DAK key/Input must be pressed and held before the call is established. The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. Configured from the “Call Setting” section. Press and Hold Time is used to support the following use cases: Lift call Category: Zenitel Connect Pro Category: Zenitel Connect Pro Features and Functions" |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
The '''Press and Hold Time''' defines how many seconds a Call Button (DAK key or input) must be continuously pressed before a call is initiated. | |||
The | The delay can be set from '''0 seconds''' (default) up to '''60 seconds'''. | ||
Press and Hold Time is typically used in scenarios where accidental activation must be avoided—for example, '''lift (elevator) call functions'''. | |||
== Configuration == | |||
Navigate to '''Devices and Connections''' > '''Configuration'''. Select the Device and click [[File:ZC_CallsettingsIcon3.PNG|25px]]<br> | |||
Under "Press and Hold Time" adjust the slider to the wanted delay. | |||
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;"> | |||
<tr style="rowspan:2;"> | |||
<td style="display: block; vertical-align: bottom;">[[File:ZCP PressAndHold.png|700px]]</td> | |||
</tr> | |||
<tr> | |||
<td style='background-color:#efefef;'>Press an Hold timer </td> | |||
</tr> | |||
</table> | |||
Latest revision as of 14:59, 13 February 2026
The Press and Hold Time defines how many seconds a Call Button (DAK key or input) must be continuously pressed before a call is initiated.
The delay can be set from 0 seconds (default) up to 60 seconds. Press and Hold Time is typically used in scenarios where accidental activation must be avoided—for example, lift (elevator) call functions.
Configuration
Navigate to Devices and Connections > Configuration. Select the Device and click 
Under "Press and Hold Time" adjust the slider to the wanted delay.
 |
| Press an Hold timer |