Press-to-talk (PTT) (Zenitel Connect Pro): Difference between revisions
From Zenitel Wiki
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{C}} | {{C}} | ||
In a standard two‑way call in Zenitel Connect Pro, Zenitel intercom devices communicate in '''open duplex''' mode, enabling natural, hands‑free conversation with automatic echo cancellation. | |||
For situations where controlled, one‑way speech is preferred, Zenitel native devices support '''Press‑to‑Talk (PTT)''', allowing users to momentarily override open duplex mode. | |||
===Press-to-Talk Operation=== | |||
* '''Press M key''' | |||
* Press M key | |||
**Device enters '''Talk Mode''' | **Device enters '''Talk Mode''' | ||
** Loudspeaker is muted | ** Loudspeaker is muted | ||
** The device sends DTMF ‘*’ to the remote side | ** The device sends '''DTMF ‘*’''' to the remote side | ||
* Release M key | * '''Release M key''' | ||
** Device returns to '''Open Duplex''' | ** Device returns to '''Open Duplex''' | ||
** The device sends DTMF ‘#’ to the remote side | ** The device sends '''DTMF ‘#’''' to the remote side | ||
The | The Zenitel Connect Pro will relay these DTMF * and # events to the remote device. | ||
Remote Control of Speech Mode (Received DTMF) | ===Remote Control of Speech Mode (Received DTMF)=== | ||
Zenitel native devices respond to DTMF signals received from the remote device: | Zenitel native devices respond to DTMF signals received from the remote device: | ||
* '''On receiving DTMF ‘*’''' | |||
** Device enters '''Listen Mode''' | |||
** Microphone is muted | |||
* '''On receiving DTMF ‘#’''' | |||
** Device returns to '''Open Duplex''' | |||
===Configuration Requirements=== | |||
Configuration Requirements | |||
No additional configuration is required for Press‑to‑Talk functionality. | No additional configuration is required for Press‑to‑Talk functionality. | ||
However, this feature only applies when at least one device in the call is a Zenitel native device. | However, this feature only applies when at least one device in the call is a Zenitel native device. | ||
If neither device in the call is Zenitel native, Press‑to‑Talk does not apply. | If '''neither''' device in the call is Zenitel native, Press‑to‑Talk does not apply. | ||
[[Category: Zenitel Connect Pro]] | [[Category: Zenitel Connect Pro]] | ||
[[Category: Zenitel Connect Pro Features and Functions]] | [[Category: Zenitel Connect Pro Features and Functions]] | ||
Latest revision as of 21:14, 14 February 2026
In a standard two‑way call in Zenitel Connect Pro, Zenitel intercom devices communicate in open duplex mode, enabling natural, hands‑free conversation with automatic echo cancellation.
For situations where controlled, one‑way speech is preferred, Zenitel native devices support Press‑to‑Talk (PTT), allowing users to momentarily override open duplex mode.
Press-to-Talk Operation
- Press M key
- Device enters Talk Mode
- Loudspeaker is muted
- The device sends DTMF ‘*’ to the remote side
- Release M key
- Device returns to Open Duplex
- The device sends DTMF ‘#’ to the remote side
The Zenitel Connect Pro will relay these DTMF * and # events to the remote device.
Remote Control of Speech Mode (Received DTMF)
Zenitel native devices respond to DTMF signals received from the remote device:
- On receiving DTMF ‘*’
- Device enters Listen Mode
- Microphone is muted
- On receiving DTMF ‘#’
- Device returns to Open Duplex
Configuration Requirements
No additional configuration is required for Press‑to‑Talk functionality. However, this feature only applies when at least one device in the call is a Zenitel native device. If neither device in the call is Zenitel native, Press‑to‑Talk does not apply.