Difference between revisions of "Physical layer"
From Zenitel Wiki
(New page: The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is: • 9600 bit/s (optional 1200, 2400...) |
(No difference)
|
Revision as of 00:19, 20 June 2007
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is: • 9600 bit/s (optional 1200, 2400 or 4800 bit/s) • 8 data bits • no parity • one stop bit