Difference between revisions of "Physical layer"
From Zenitel Wiki
(New page: The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is: • 9600 bit/s (optional 1200, 2400...) |
|||
| Line 1: | Line 1: | ||
| − | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The | + | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s serial ports. |
Default port setting is: | Default port setting is: | ||
| − | + | *9600 bit/s (optional 1200, 2400 or 4800 bit/s) | |
| − | + | *8 data bits | |
| − | + | *no parity | |
| − | + | *one stop bit | |
Revision as of 23:20, 19 June 2007
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is:
- 9600 bit/s (optional 1200, 2400 or 4800 bit/s)
- 8 data bits
- no parity
- one stop bit