Physical layer: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s serial ports. | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s [[Serial port pinout|serial ports]]. | ||
Default port setting is: | Default port setting is: | ||
*9600 bit/s (optional 1200, 2400 or 4800 bit/s) | *9600 bit/s (optional 1200, 2400 or 4800 bit/s) | ||
| Line 5: | Line 5: | ||
*no parity | *no parity | ||
*one stop bit | *one stop bit | ||
In AlphaCom E the protocol can also be encapsulated in TCP/IP. | |||
[[Category:AlphaCom E Software]] | [[Category:AlphaCom E Software]] | ||
Revision as of 23:16, 17 December 2007
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is:
- 9600 bit/s (optional 1200, 2400 or 4800 bit/s)
- 8 data bits
- no parity
- one stop bit
In AlphaCom E the protocol can also be encapsulated in TCP/IP.