Difference between revisions of "DEVICE INFO"
From Zenitel Wiki
| Line 32: | Line 32: | ||
|align=center|7||[[UINT1]]<br\>(optional)||colspan="2"|Software revision number||AMC 11.00 | |align=center|7||[[UINT1]]<br\>(optional)||colspan="2"|Software revision number||AMC 11.00 | ||
|- | |- | ||
| − | |align=center|8||[[UINT2]]<br\>(optional)||colspan="3"|Various system states: <br> Device specific<br\>[[AMC]]: <br>BIT1 = 1:IP standby mode. (Sys evh, sub 230) <br> BIT2 = 1:Connected to HA pair. (Sys evh, sub 231) <br> BIT3 = 1:HA configuration master | + | |align=center|8||[[UINT2]]<br\>(optional)||colspan="3"|Various system states: <br> Device specific<br\>[[AMC]]: <br>BIT1 = 1:IP standby mode. (Sys evh, sub 230) <br> BIT2 = 1:Connected to HA pair. (Sys evh, sub 231) <br> BIT3 = 1:HA configuration master (Sys evh, sub 232) |
|- | |- | ||
|} | |} | ||
Revision as of 07:16, 15 August 2012
| DEVICE_INFO | 0x003B | 59 | AMC 05.00 | |
|---|---|---|---|---|
| Response to the GET_DEVICE message. <br\>
Note: The DEVICE_INFO timeout is set to 5 seconds default. The timeout is adjustable in nvram (.ex_profile.timeouts.device_answer_time = 50 (0x0032)) | ||||
| 1 | UINT1 | DEVICE TYPE<br\>
0=Illegal<br\> 1=AlphaCom (Intercom Exchange)<br\> 2=RIO (Remote I/O unit with RCIs and RCOs)<br\> 3=Control Handler (PC with call queuing features)<br\> 4=Operator (Passive device without PING/PING, for Simple Link Layer terminal)<br\> 5=SIP node<br\> 6=RMD node<br\> 7=M100 node<br\> 255=Unknown (External computer with unspesific functionality) | ||
| 2 | UINT1<br\>(optional) | Software version: Major | AMC 08.00 | |
| 3 | UINT1<br\>(optional) | Software version: Minor | AMC 08.00 | |
| 4 | UINT1<br\>(optional) | Abilities. Device specific<br\>AMC: Price Version.<br\>RIO: 1 = IIC board present | AMC 08.00 | |
| 5 | TEXT16<br\>(optional) | Device Name. | AMC 08.00 | |
| 6 | UINT1<br\>(optional) | Software state version | AMC 11.00 | |
| 7 | UINT1<br\>(optional) | Software revision number | AMC 11.00 | |
| 8 | UINT2<br\>(optional) | Various system states: Device specific<br\>AMC: BIT1 = 1:IP standby mode. (Sys evh, sub 230) BIT2 = 1:Connected to HA pair. (Sys evh, sub 231) BIT3 = 1:HA configuration master (Sys evh, sub 232) | ||