Actions

Difference between revisions of "AMC - AlphaCom Processor Board"

From Zenitel Wiki

(Technical Specifications)
(Technical Specifications)
Line 38: Line 38:
 
{| border="1"
 
{| border="1"
 
|-
 
|-
| width="100pt"|'''Dimensions''' (WxHxD)<br\>
+
| width="100pt"|'''Order Number'''  
| width="200pt"|10x230x263mm <br\>Double Extended Europe Format
+
| width="200pt"|100 9201 000
 
|-
 
|-
| Central processor <br\><br\> || Intel IPX425, 400 MHz, XScale core <br\> 3 Network Processor Engines <br\> Hardware Encryption
+
|Operation Voltage: || 5 and 15 V DC V DC
 
|-
 
|-
| '''Media processors''' <br\> DSP <br\> FPGA <br\> || <br\> TI TMS320C6205, 200 MHz, 1600 MIPS <br\> XILINX Spartan-3 <br\> 32 parallel audio streams
+
|Dimensions (W x H x D) <br\><br\> || 10mm x 230mm x 263mm <br\> 0.39" x 8.97" x 10.26" <br\> Double Extended Europe Format
 
|-
 
|-
|RAM, Workspace <br\> NVRAM (Battery) || 128 MB SDRAM <br\> 1 MB SRAM
+
|CUP type: || Motorola MC68HC000 (running at 16.384 MHz
 
|-
 
|-
|'''Flash''' <br\> Program <br\> Optional || <br\> 32 MB StartaFlash <br\> Up to 4 GB Compact Flash
+
|RAM <br\> workspace: <br\> battery-backed NVRAM: || <br\> 512 Kb <br\> 512Kb
 
|-
 
|-
|Operating system || Linux v. 2.4.20
+
|Indicator <br\> || Board status LED (green/amber/red) <br\> Red reset LED
|-
 
|'''Serial ports''' <br\> RS232 only <br\> RS232 / 422 / 485 || <br\> Up to 115200 kbps <br\> Up to 115200 kbps
 
|-
 
|Ethernet ports (2 x) <br\><br\><br\><br\> || IEEE 802.3 <br\> 10/100 Mbps <br\> Half / Full Duplex <br\> Auto Negotiation <br\> Auto MDI/MDIX switch-over
 
|-
 
|'''IP protocols''' <br\><br\> || IP v4 - IP v6 - TCP - UDP - Telenet - FTP - NTP <br\> - HTTP 1.1 - Syslog - SNMP v2c - SIP - RTP - <br\> RTCP - VolP AlphaNet - STENTOFON data
 
|-
 
|'''Audio technology''' <br\><br\><br\> || High-Resolution 1-Bit Audio - High-Fidelity <br\> 40 Hz-18.5 kHz - Wideband 7kHz (G.722) <br\> - Narrowband 3.4 kHz (G.711) - Adaptive <br\> Jitter Buffers - Adaptive Time Synchronization
 
 
|-
 
|-
 
|}
 
|}

Revision as of 07:52, 8 August 2007

Features

AMC Processor Board
  • Software on EPROM controls all functions
  • Customer programming on NVRAM-battery backup
  • NVRAM backup on FLASH memory
  • 8 serial ports supporting RS232 and RS422/485 (software controlled)
  • Board monitoring
  • Programmable/configurable from PC
  • Real-time clock with battery backup
  • Generates all system tones/gongs
  • Display data generator
  • Module controller
  • Autoload button in front (used in combination with reset button on APC)
  • 2 LEDs in front indicate status

Description

This board contains software and hardware controlling the whole system. The board houses ASICs developed by STENTOFON: the MBI (Master Bus Interface) and SBI (Slave Bus Interface). It plugs into any of positions 20-25, recommended position is 25. The software on the board supports board monitoring which reports errors on all the other boards in the system. The reports can be printed out by connecting a printer to one of the serial ports. In addition there is the possibility to log technical alarms. All signals for external equipment is run to a connection board mounted on the connection field of the exchange.

Data Connection Board

Data Connection Board

Technical Specifications

Order Number 100 9201 000
Operation Voltage: 5 and 15 V DC V DC
Dimensions (W x H x D) <br\><br\> 10mm x 230mm x 263mm <br\> 0.39" x 8.97" x 10.26" <br\> Double Extended Europe Format
CUP type: Motorola MC68HC000 (running at 16.384 MHz
RAM <br\> workspace: <br\> battery-backed NVRAM: <br\> 512 Kb <br\> 512Kb
Indicator <br\> Board status LED (green/amber/red) <br\> Red reset LED