Difference between revisions of "IP Sub Connections"
From Zenitel Wiki
m (1 revision imported) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 34: | Line 34: | ||
These connections are used as relay contacts for door lock control and external I/O devices. | These connections are used as relay contacts for door lock control and external I/O devices. | ||
| − | + | See [[INCA Substation Board Connectors]] for more details. | |
[[Category: INCA Connections]] | [[Category: INCA Connections]] | ||
Latest revision as of 14:10, 5 February 2018
Main connectors
| LAN | 10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| AUX | 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. |
| Input/Output | Pluggable screw terminal |
| Local Power | Plugable screw terminal, 19-27 VDC Idle 4W, max. 8W |
Power Supply
The IP Substation supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply.
Network Connection
There are two RJ45 ports on the IP Substations:
- LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server.
- AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera.
Input/Output Connections
There are I/O connection options for all IP Substations. These I/O connections include:
- 3 digital inputs (P4)
- 1 logical output (TP9)
- 1 relay output (P3)
These connections are used as relay contacts for door lock control and external I/O devices.
See INCA Substation Board Connectors for more details.