Calling and Conversation Between Stations

Initiating and Canceling a Hands-free Call

To call another station, just dial the number of the station. If you have the number programmed on a single-touch key, just press this key. When the call is connected in open mode, a warning tone is heard and the red lamp lights on both stations.

With TouchLine stations most users appreciate this hands-free conversation. Others prefer “telephone”-like calls where the called party accepts the call (typically by lifting the handset). This is explained on the next page.

During the conversation the system automatically switches the voice direction from one station to the other depending on the voice levels at each end (Duplex). In locations with normal noise levels, you can have your hands free throughout the conversation, and you can speak from wherever you are in the room.

To end the call, either party may press the C-key. The red lamp goes out on both stations.

Additional Information

• The AlphaCom System allows you to reach the same station with several different directory numbers. This is useful if several people share the same room, and you want their names available on the Name Directory.
• The system differentiates between stations and users. Maximum number of stations in a 4-module system is 552, max. number of users is 600. Max. number of station is a Basic Module is 138.

Call Setup Priority

Each station has a priority setting which decides how outgoing calls from that station are treated at the receiving station. All stations are given medium priority in the autoload.

Action/Priority	Low	Medium	High	Alarm
Call to an idle, open station	Rings	Connects	Connects	Connects
Call to station with private switch ON	Rings	Rings	Connects	Connects
Call to a station with an absence message	Hears the message	Hears the message	Connects	Connects
Call to a busy station	Busy tone	Busy tone	Busy tone	Connects