Difference between revisions of "Physical number 5 and 6 (AlphaCom E7)"
From Zenitel Wiki
| Line 4: | Line 4: | ||
* To enable physical number 5 and/or 6 to be used for regular intercom stations: | * To enable physical number 5 and/or 6 to be used for regular intercom stations: | ||
:* Set jumpers P5 and/or P6 to position 1-2. There are five jumpers for P5, and five jumpers for P6. P5 is for physical port 5, and P6 is for physical number 6. | :* Set jumpers P5 and/or P6 to position 1-2. There are five jumpers for P5, and five jumpers for P6. P5 is for physical port 5, and P6 is for physical number 6. | ||
| − | [[Image:ACE7 backplane.jpg|thumb| | + | [[Image:ACE7 backplane.jpg|thumb|300px|left|AlphaCom XE7 backplane]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 14:44, 7 September 2015
In the AlphaCom XE7 the physical numbers 5 and 6 on the first ASLT line board are enabled for program distribution by default.
- To enable physical number 5 and/or 6 to be used for regular intercom stations:
- Set jumpers P5 and/or P6 to position 1-2. There are five jumpers for P5, and five jumpers for P6. P5 is for physical port 5, and P6 is for physical number 6.
- In AlphaPro, select Exchange & System -> Boards
- Change the port setting from ‘Audio program feed’ to ‘Default’
- Reset the exchange
