Difference between revisions of "AlphaVision"
From Zenitel Wiki
(→AlphaVision 3.10) |
(→Main changes) |
||
| Line 7: | Line 7: | ||
* Communication via IP, as well as via a serial link, with the AlphaCom E exchange. | * Communication via IP, as well as via a serial link, with the AlphaCom E exchange. | ||
* Possibility of tagging icons with an ‘Invisible’ flag. This is especially useful when there are many icons on the same map. Icons can be programmed to only be visible in an active state. | * Possibility of tagging icons with an ‘Invisible’ flag. This is especially useful when there are many icons on the same map. Icons can be programmed to only be visible in an active state. | ||
| − | * Default map. When the last active icon becomes idle the default map is shown; use of this feature | + | * Default map. When the last active icon becomes idle the default map is shown; use of this feature is optional. |
| − | is optional. | ||
* Overview window which shows a list with small pictures of maps with active icons. Clicking on anentry in the list will bring the relevant map to the foreground. This list replaces the automatic changing of maps on incoming call requests. The list can include intercom, status input and status output icons; this is programmable. | * Overview window which shows a list with small pictures of maps with active icons. Clicking on anentry in the list will bring the relevant map to the foreground. This list replaces the automatic changing of maps on incoming call requests. The list can include intercom, status input and status output icons; this is programmable. | ||
* Inclusion of a ‘Show map’ script command. | * Inclusion of a ‘Show map’ script command. | ||
Revision as of 08:56, 5 July 2007
AlphaVision 3.10
Some additional functionality has been implemented when compared to version 3.02.
Main changes
AlphaVision differs from the previous version in the following ways:
- Communication via IP, as well as via a serial link, with the AlphaCom E exchange.
- Possibility of tagging icons with an ‘Invisible’ flag. This is especially useful when there are many icons on the same map. Icons can be programmed to only be visible in an active state.
- Default map. When the last active icon becomes idle the default map is shown; use of this feature is optional.
- Overview window which shows a list with small pictures of maps with active icons. Clicking on anentry in the list will bring the relevant map to the foreground. This list replaces the automatic changing of maps on incoming call requests. The list can include intercom, status input and status output icons; this is programmable.
- Inclusion of a ‘Show map’ script command.
- Availability of a USB dongle, item nr 1009294120.
Availability
AlphaVision 3.10 can be downloaded from the Zenitel website, www.zenitel.com. As before, the software can run in demo-mode when no dongle is connected to the PC; demo-mode is fully functional, but is limited to only 6 devices. When the full version is ordered the delivery is the dongle: 1009294100 for a parallel port dongle, 1009294120 for a USB dongle. The updated manual for AlphaVision 3.10 is also available from the website.