Difference between revisions of "WK20 - 20W Power Amplifier"
From Zenitel Wiki
(→Description) |
(→Features) |
||
| Line 2: | Line 2: | ||
===Features=== | ===Features=== | ||
* Output for 1 amplified loudspeaker | * Output for 1 amplified loudspeaker | ||
| − | * Output level control | + | * Output level control |
| + | |||
===Description=== | ===Description=== | ||
The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off. | The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off. | ||
Revision as of 13:30, 28 August 2007
Contents
Power Amplier 1000614100
Features
- Output for 1 amplified loudspeaker
- Output level control
Description
The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off.
The symetrical input is matched to the output level on the subscriber board in the AlphaCom exchange.
The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail.
To balance out hum and noise.
Connectors and Switches
<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>
Technical Specifications
| Text | Value |
|---|---|
| Item Number | 1000614100 |
| Input signal level | 1 V - 10 V |
| Input impedance | 6kOhm |
| Output power<br\><br\> | 20 W into 4ohm<br\>12 W into 8 ohm<br\>6 W into 20 ohm |
| Frequency range | 140 - 20.000Hz |
| Max. amplification | 10.5 dB |
| Recommended room temperature<br\> | 0'C to +35'C<br\>+32'F to + 95'F |
| Humidity Range<br\>(non-condensing): | 10% - 90% RH<br\> |
| Dimensions W x H x D<br\> | 75mm x 84 mm x 40 mm<br\>2.9" x 3.3" x 1.6" |