Difference between revisions of "Open / Private selection feature"

Revision as of 22:29, 28 January 2008

Feature:	Programmable Open/Private
Default directory number:	7886, 7887
Feature number:	80
Parameter 1:	0 = Open (7886) 1 = Private (7887)
Description:	Feature codes for setting the station in Open or Private mode. To use these codes, the station must first be enabled for this feature in AlphaPro, Users & Stations -> Station Type -> Programmable Open/Private. Additional information: By default the Open/Private status is decided by the station hardware by means of a Open/Private switch on the station This feature is an alternative to mechanical PRIVATE switch

Back to feature list

@@ Line 13: / Line 13: @@
 Additional information:
-* By default the Open/Private status is decided by the station hardware by means of a Open/Private switch on the station.
+* By default the Open/Private status is decided by the station hardware by means of a Open/Private switch on the station
-* Alternative to mechanical PRIVATE switch.
+* This feature is an alternative to mechanical PRIVATE switch
@@ Line 20: / Line 20: @@
 |}
-Procedure:  Dial 7886.  If the feature is allowed, a success tone is heard, else a failure tone.  The setting is permanent (stored in NVRAM, survives reset).
-Configuration:  There is a flag in AlphaPro that decide if this station's OPEN/PRIVATE status is controlled by feature codes OR by station hardware.  (User/More../Programmable Open/Private).
-Application:
-•	Fixed functionality often required, where the station must ignore the PRIVATE switch.
-•	EMC problems with PRIVATE switch in wall stations.  Now solved by removing the switch, and use keypad for PRIVATE mode.
-Version: AMC 06.00    DirNo: 7886     Feature: 80/0     (Db ref. 587)
-.1.7.	Feature idle:  Set station PRIVATE
-Alternative way to select call mode PRIVATE.
-Procedure:  Dial 7887.  If the feature is allowed, a success tone is heard, else a failure tone.  The setting is permanent (stored in NVRAM, survives reset).
-  (User/More../Programmable Open/Private).
-Application:
-•	Fixed functionality often required, where the station must ignore the PRIVATE switch.
-•	EMC problems with PRIVATE switch in wall stations.  Now solved by removing the switch, and use keypad for PRIVATE mode.
-'''80 FEAT_OPEN_PRIVATE'''
-{| border="1"
-!style="background:#ffdead;"|Param1
-!style="background:#ffdead;"|Description
-|-
-| ?? || Toggle functional OPEN/PRIVATE on station
-|-
-|colspan="2"|Alternative to mechanical PRIVATE switch.
-Mode 0 = OPEN.
-Mode 1 = PRIVATE (must be enabled per station).
-|-
-|}
 [[AlphaCom Feature List|Back to feature list]]

Difference between revisions of "Open / Private selection feature"

From Zenitel Wiki

Revision as of 22:29, 28 January 2008