Difference between revisions of "AlphaCom XE1"
From Zenitel Wiki
(→Connections=) |
|||
| Line 10: | Line 10: | ||
===<u>[http://www.zenitel.com/product/alphacom-xe1 Additional Documentation on Zenitel.com]</u>=== | ===<u>[http://www.zenitel.com/product/alphacom-xe1 Additional Documentation on Zenitel.com]</u>=== | ||
| − | ==<u>Connections</u>=== | + | ===<u>Connections</u>=== |
* Two RJ-45 Ethernet terminals are used for IP LAN, WAN, Internet and AlphaNet IP communication. Eth0 is also used for programming | * Two RJ-45 Ethernet terminals are used for IP LAN, WAN, Internet and AlphaNet IP communication. Eth0 is also used for programming | ||
* The serial ports with RS232 and RS422/RS485 interfaces are used for connecting to equipment using these protocols | * The serial ports with RS232 and RS422/RS485 interfaces are used for connecting to equipment using these protocols | ||
Revision as of 13:47, 3 November 2016
Highlights
- Made to provide critical communication in any environment
- Supports 552 IP stations
- Environmental friendly and energy saving - max. 4 W
- SIM card based software configuration and disaster recovery
- Fully compatible with any AlphaCom system
Additional Documentation on Zenitel.com
Connections
- Two RJ-45 Ethernet terminals are used for IP LAN, WAN, Internet and AlphaNet IP communication. Eth0 is also used for programming
- The serial ports with RS232 and RS422/RS485 interfaces are used for connecting to equipment using these protocols
- There are two inputs for clean contacts on the RCI connectors which can execute programmable functions. Note that the cabinet needs to be opened to get access to these connectors
- The exchange is normally powered from the mains via a 5 VDC power supply
File:XE1 Connections.png
500px