Difference between revisions of "IP Substation Board Connection"
From Zenitel Wiki
| Line 9: | Line 9: | ||
The station can be powered from this connection if the line supports Power over Ethernet. | The station can be powered from this connection if the line supports Power over Ethernet. | ||
|- | |- | ||
| − | |''' | + | |'''P2''': || RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station. <br> |
| + | This port has not an individual IP address or power for aux equipment. | ||
|- | |- | ||
| − | |''' | + | |'''P3''': || 6-pin plug-on screw terminal for external connections. |
|- | |- | ||
| − | |''' | + | |'''P4''': || When the "microphone alive" LED of the station goes ON |
|- | |- | ||
|'''When change to OFF''': || When the "microphone alive" LED of the station goes OFF | |'''When change to OFF''': || When the "microphone alive" LED of the station goes OFF | ||
| Line 23: | Line 24: | ||
P1: RJ45 connector for LAN connection | P1: RJ45 connector for LAN connection | ||
The station can be powered from this connection if the line supports Power over Ethernet. | The station can be powered from this connection if the line supports Power over Ethernet. | ||
| − | P2: RJ45 connector for auxiliary LAN | + | P2: RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station. |
| − | |||
| − | |||
This port has not an individual IP address or power for aux equipment. | This port has not an individual IP address or power for aux equipment. | ||
| − | P3: 6-pin plug-on screw terminal for | + | P3: 6-pin plug-on screw terminal for external connections. |
| − | |||
Pin 1/2: Connect 24 VDC for station power if | Pin 1/2: Connect 24 VDC for station power if | ||
power is not distributed via LAN. | power is not distributed via LAN. | ||
Revision as of 20:48, 10 October 2007
There are four connectors on the IP substation board, P1-P4.
| P1: | RJ45 connector for LAN connection The station can be powered from this connection if the line supports Power over Ethernet. |
| P2: | RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station. This port has not an individual IP address or power for aux equipment. |
| P3: | 6-pin plug-on screw terminal for external connections. |
| P4: | When the "microphone alive" LED of the station goes ON |
| When change to OFF: | When the "microphone alive" LED of the station goes OFF |
| When related to: | N/A |
P1: RJ45 connector for LAN connection The station can be powered from this connection if the line supports Power over Ethernet. P2: RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station. This port has not an individual IP address or power for aux equipment. P3: 6-pin plug-on screw terminal for external connections. Pin 1/2: Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive. Pin 3/4: Internal NO relay contact for door lock control etc. Pin 5/6: Normally connected to station loudspeaker. May be used for 16-20 ohm/2 W external loudspeaker in parallel. P4: 6-pin plug-on screw terminal for internal connections. Pin 1/4: Call button no.1. Pin 2/4: Call button no.2 if included Pin 3/4: Call button no.3 if included Pin 5/6: Station LED for call and message info. TP1/2: Optional external audio output. This is a 0 dB, 600 ohm balanced output for connection to a power amplifier. Note that the amplifier input MUST HAVE AN INSULATED INPUT (trafo, capacitors, etc.).