|
|
| (15 intermediate revisions by one other user not shown) |
| Line 1: |
Line 1: |
| [[Image:IP substation connections.jpg|right]] | | #REDIRECT [[Weather and Vandal Resistant IP Substation - 1008041100]] |
| | |
| There are four connectors on the IP substation board, P1-P4.
| |
| | |
| {|
| |
| |-
| |
| |width="50pt" valign="top" |'''P1''':
| |
| |width="300pt"|RJ45 connector for LAN connection.
| |
| |-
| |
| | colspan="2" | The station can be powered from this connection if the line supports Power over Ethernet.<br>
| |
| |-
| |
| |valign="top"|'''P2''': || RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station. <br>
| |
| |-
| |
| | colspan="2" | This port has not an individual IP address or power for aux equipment.
| |
| |-
| |
| |'''P3''': || 6-pin plug-on screw terminal for external connections.
| |
| |-
| |
| |''Pin 1/2'': || Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive.
| |
| |-
| |
| |''Pin 3/4'': || Internal NO relay contact for door lockcontrol etc.
| |
| |-
| |
| |''Pin 5/6'': || Normally connected to station loudspeaker.
| |
| |-
| |
| |'''P4''': || 6-pin plug-on screw terminal for internal connections.
| |
| |-
| |
| | ''Pin 1/4'': || Call button no.1.
| |
| |-
| |
| | ''Pin 2/4'': || Call button no.2 if included
| |
| |-
| |
| | ''Pin 3/4'': || Call button no.3 if included
| |
| |-
| |
| | ''Pin 5/6'': || Station LED for call and message info.
| |
| |-
| |
| |}
| |
| | |
| P1: RJ45 connector for LAN connection
| |
| The station can be powered from this connection if the line supports Power over Ethernet.
| |
| P2: RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station.
| |
| This port has not an individual IP address or power for aux equipment.
| |
| P3: 6-pin plug-on screw terminal for external connections.
| |
| Pin 1/2: Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive.
| |
| Pin 3/4: Internal NO relay contact for door lockcontrol etc.
| |
| Pin 5/6: Normally connected to station loudspeaker.
| |
| May be used for 16-20 ohm/2 W external loudspeaker in parallel.
| |
| P4: 6-pin plug-on screw terminal for internal connections.
| |
| Pin 1/4: Call button no.1.
| |
| Pin 2/4: Call button no.2 if included
| |
| Pin 3/4: Call button no.3 if included
| |
| Pin 5/6: Station LED for call and message info.
| |
| TP1/2: Optional external audio output.
| |
| This is a 0 dB, 600 ohm balanced output for connection to a power amplifier.
| |
| Note that the amplifier input MUST HAVE AN INSULATED INPUT (trafo, capacitors, etc.).
| |
