|
|
| (One intermediate revision by one other user not shown) |
| Line 1: |
Line 1: |
| [[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | | #REDIRECT [[Weather and Vandal Resistant IP Substation - 1008041100]] |
| == Station LED (on board and in front plate) ==
| |
| '''Blinking at 1 second interval''': Station does not have connection to the AlphaCom E exchange.
| |
| ''Possible reasons'':
| |
| * No connection to Ethernet
| |
| * Wrong AlphaCom E IP address configured
| |
| * Invalid IP address
| |
| * No or wrong gateway to the AlphaCom E exchange
| |
|
| |
| '''Blinking at 5 seconds interval''': Station has connection to the AlphaCom E exchange, but has not been registered.
| |
| ''Reason'':
| |
| * Station has not been programmed in AlphaPro
| |
| | |
| '''No blinking'''
| |
| ''Possible reasons'':
| |
| * Station connected and registered to the AlphaCom E exchange - All OK
| |
| * Station not powered up (if no other LEDs are active)
| |
| | |
| == Status LED ==
| |
| * '''Blinking 2 red + 1 green''': Station does not have connection to the AlphaCom E exchange
| |
| * '''Blinking 1 red + 2 green''':Station has connection to AlphaCom E exchange, but has not been registered
| |
| * '''Blinking 3 green''': Station connected and registered in the AlphaCom E exchange
| |
| | |
| == LAN LEDs (on LAN and AUX RJ45-jacks) ==
| |
| '''Left green LED''':
| |
| * Steady light: Ethernet connection OK
| |
| * Blinking: Ethernet traffic
| |
| * No light: No Ethernet connection
| |
| '''Right amber LED''':
| |
| * Light: 100 Mbit Ethernet connection
| |
| * No light: 10 Mbit Ethernet connection
| |
| | |
| [[Category: Stations]]
| |
| [[Category: IP Stations]]
| |
