GSM gateway (Mobile VoIP)

This article describes the setup for the GSM gateway MV-370 from PORTech Communications Inc

Default IP address is 192.168.0.100

Username: voip Password: 1234

Route:

• Route > Mobile to LAN Settings: CID = *, URL = *

This setting will give a second Dial-Tone on incoming calls to AlphaCom. The user must then dial the intercom number. The Mobile VoIP unit will connect the call 5 seconds after having received the last digit in the intercom number.

• Route > Mobile to LAN Settings: CID = *, URL = 101

With this setting incoming calls will automatically connect to station 101 in the AlphaCom.

Mobile:

• Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose Enable, and enter the pin code, and confirm the pin code

• Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network.

Network:

• Network > WAN Settings > IP Type = Enable "Fixed IP"
• Network > WAN Settings > IP = IP address of the Mobile VoIP unit
• Network > WAN Settings > Mask = Network mask
• Network > WAN Settings > Gateway = IP address of the network gateway

SIP Settings:

In SIP Settings > Service Domain, enter information for "Realm 1":

• SIP Settings > Service Domain > Active = ON
• SIP Settings > Service Domain > Display Name = Any text
• SIP Settings > Service Domain > User Name = Access number to the gateway
• SIP Settings > Service Domain > Register Name = Access number to the gateway
• SIP Settings > Service Domain > Domain Server = IP address of the AlphaCom
• SIP Settings > Service Domain > Proxy Server = IP address of the AlphaCom

Status = Registered: The gateway is registered at the AlphaCom.

• SIP Settings > DTMF Setting: Enable "Send DTMF SIP Info"

Limitations: Outgoing calls from AlphaCom:

• No DTMF tones can be sent from AlphaCom to the line during conversation (Nettbank kan ikke brukes).
• Digits during conversation (e.g. door opening, M-key) not possible from the phone