Actions

Difference between revisions of "GSM gateway (Mobile VoIP)"

From Zenitel Wiki

Line 1: Line 1:
 
This article describes the setup of the GSM gateway MV-370 from [http://www.portech.com.tw PORTech Communications Inc]
 
This article describes the setup of the GSM gateway MV-370 from [http://www.portech.com.tw PORTech Communications Inc]
 
[[Image:SIP GSM Gateway.jpg|thumb|right|Configuration example]]
 
[[Image:SIP GSM Gateway.jpg|thumb|right|Configuration example]]
 +
 +
== Configuration of the MV-370==
 
Default IP address is 192.168.0.100
 
Default IP address is 192.168.0.100
  
Line 6: Line 8:
 
Password: 1234
 
Password: 1234
  
 +
=== Route settings ===
 
Route:
 
Route:
 
* Route > Mobile to LAN Settings: CID = *, URL = *
 
* Route > Mobile to LAN Settings: CID = *, URL = *
Line 13: Line 16:
 
With this setting incoming calls will automatically connect to station 101 in the AlphaCom.
 
With this setting incoming calls will automatically connect to station 101 in the AlphaCom.
  
 +
=== Mobile settings ===
 
Mobile:
 
Mobile:
 
*Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose '''Enable''', and enter the pin code, and confirm the pin code
 
*Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose '''Enable''', and enter the pin code, and confirm the pin code
Line 18: Line 22:
 
*Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network.
 
*Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network.
  
 +
=== Network settings ===
 
Network:
 
Network:
 
*Network > WAN Settings > IP Type = Enable "Fixed IP"
 
*Network > WAN Settings > IP Type = Enable "Fixed IP"
Line 24: Line 29:
 
*Network > WAN Settings > Gateway = IP address of the network gateway
 
*Network > WAN Settings > Gateway = IP address of the network gateway
  
 
+
=== SIP settings===
 
SIP Settings:
 
SIP Settings:
  
Line 41: Line 46:
  
  
Limitations:
+
=== Limitations===
 
Outgoing calls from AlphaCom:
 
Outgoing calls from AlphaCom:
 
* No DTMF tones can be sent from AlphaCom to the line during conversation (Nettbank kan ikke brukes).
 
* No DTMF tones can be sent from AlphaCom to the line during conversation (Nettbank kan ikke brukes).
 
* Digits during conversation (e.g. door opening, M-key) not possible from the phone
 
* Digits during conversation (e.g. door opening, M-key) not possible from the phone
 +
 +
== Configuration of AlphaCom E ==

Revision as of 22:06, 5 March 2008

This article describes the setup of the GSM gateway MV-370 from PORTech Communications Inc

Configuration example

Configuration of the MV-370

Default IP address is 192.168.0.100

Username: voip Password: 1234

Route settings

Route:

  • Route > Mobile to LAN Settings: CID = *, URL = *

This setting will give a second Dial-Tone on incoming calls to AlphaCom. The user must then dial the intercom number. The Mobile VoIP unit will connect the call 5 seconds after having received the last digit in the intercom number.

  • Route > Mobile to LAN Settings: CID = *, URL = 101

With this setting incoming calls will automatically connect to station 101 in the AlphaCom.

Mobile settings

Mobile:

  • Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose Enable, and enter the pin code, and confirm the pin code
  • Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network.

Network settings

Network:

  • Network > WAN Settings > IP Type = Enable "Fixed IP"
  • Network > WAN Settings > IP = IP address of the Mobile VoIP unit
  • Network > WAN Settings > Mask = Network mask
  • Network > WAN Settings > Gateway = IP address of the network gateway

SIP settings

SIP Settings:

In SIP Settings > Service Domain, enter information for "Realm 1":

  • SIP Settings > Service Domain > Active = ON
  • SIP Settings > Service Domain > Display Name = Any text
  • SIP Settings > Service Domain > User Name = Access number to the gateway
  • SIP Settings > Service Domain > Register Name = Access number to the gateway
  • SIP Settings > Service Domain > Domain Server = IP address of the AlphaCom
  • SIP Settings > Service Domain > Proxy Server = IP address of the AlphaCom

Status = Registered: The gateway is registered at the AlphaCom.


  • SIP Settings > DTMF Setting: Enable "Send DTMF SIP Info"


Limitations

Outgoing calls from AlphaCom:

  • No DTMF tones can be sent from AlphaCom to the line during conversation (Nettbank kan ikke brukes).
  • Digits during conversation (e.g. door opening, M-key) not possible from the phone

Configuration of AlphaCom E