Difference between revisions of "CDC STATE"
From Zenitel Wiki
| Line 20: | Line 20: | ||
3 ESTABLISHED, (SIP)connection established (200 OK received)<br\> | 3 ESTABLISHED, (SIP)connection established (200 OK received)<br\> | ||
4 ACTIVE, call is still active, will come every 10 second during connection<br\> | 4 ACTIVE, call is still active, will come every 10 second during connection<br\> | ||
| + | 5 DISCONNECT, CDC sequence ended, ABSD to release call. | ||
|- | |- | ||
|align=center|4||[[NET_OBJ_REF]]||colspan="3"|Netref related to state type, (Feature, B-station or digit) | |align=center|4||[[NET_OBJ_REF]]||colspan="3"|Netref related to state type, (Feature, B-station or digit) | ||
Revision as of 10:25, 10 June 2008
| CDC_STATE | 0x00xx | xx | AMC 10.40 | |
|---|---|---|---|---|
| Message used for billing control. <br\>
CDC = Call Detail Control | ||||
| 1 | UINT2 | Connection Reference for this "dialing" sequence (actually ST_IND of A-station) | ||
| 2 | NET_OBJ_REF | A-station (billed station), in NRF_LOCAL_DIRNO format. | ||
| 3 | UINT1 | State of billing sequence.<br\>
1 START, user has initiated a feature requiring CDC (5 = feature dirno)<br\> 2 DIGIT, user has dial a digit (5 = digit netref) <br\> 3 ESTABLISHED, (SIP)connection established (200 OK received)<br\> 4 ACTIVE, call is still active, will come every 10 second during connection<br\> 5 DISCONNECT, CDC sequence ended, ABSD to release call. | ||
| 4 | NET_OBJ_REF | Netref related to state type, (Feature, B-station or digit) | ||