Difference between revisions of "Modify ASVP alarm message repetitions (MDF)"
From Zenitel Wiki
(New page: As standard, all the alarm messages are repeated endlessly, but for some applications they are to be played once or a few times and then stop. For this operation there is a parameter for e...) |
|||
| Line 9: | Line 9: | ||
<br> | <br> | ||
<br> | <br> | ||
| − | {| | + | {|border="1" |
|Type|| ||Explanation | |Type|| ||Explanation | ||
|- | |- | ||
|#SERVICE*||<Enter>|| | |#SERVICE*||<Enter>|| | ||
|} | |} | ||
Revision as of 13:43, 13 August 2008
As standard, all the alarm messages are repeated endlessly, but for some applications they are to be played once or a few times and then stop. For this operation there is a parameter for each of the alarm messages that has to be changed. This parameter is not available from AlphaPro, it has to be changed from the nvram editor in the so-called TST console.
NOTE: Before continuing it is highly recommended to do a backup of AMC memory to Flash. Dial 7820+M from a SuperUser station.
Enable the TST-console:
- Connect a terminal (or a PC with terminal emulation program) to port 0. Terminal settings: 9600, No parity, 8 data bits, 1 stop bit.
- Enable the “TST-console” by typing (capital letters):
| Type | Explanation | |
| #SERVICE* | <Enter> |