Actions

Difference between revisions of "WK20 - Applications"

From Zenitel Wiki

(Voice direction switched with M-key)
(Amplifier switched with the M-key)
Line 35: Line 35:
  
 
==Amplifier switched with the M-key==
 
==Amplifier switched with the M-key==
[[Image:FIG WK 5 1.png|thumb|350px|Amplified Calling with answer in separate microphone. Amplifier switched with M-key]]
+
[[Image:FIG WK 5 1.png|thumb|350px|Figure 5.1: Amplified Calling with answer in separate microphone. Amplifier switched with M-key]]
 
2-47
 
2-47
  

Revision as of 14:50, 3 December 2008

Amplified Calling Tone with answer in station

Figure 1.1: Amplified Calling Tone with answer in station

Feature Description

The audio signal of incoming calls can be amplified as an extra indication of the call. The feature require a station and a separate speaker for distribution of the amplified calling tone. It is not possible to answer the call through the separate speaker.

Operation

As a call is made to the station, the corresponding RCO triggers a relay which controls the amplifier, and makes it turn on. This is repeated for every calling tone if the station is in PRIVATE position.

Equipment List

  • Loudspeaker
  • Power Amplifier WK1000614100
  • Multi Relay Board MRBD 1009970200


Installation

Wire the components as shown on figure 1.1.
Resistor R10 needs to be removed.

Programming

Amplified Calling without answer

Amplifier constantly on

Figure 2.1: Amplified Calling without answer. Amplifier constantly on

2-41

Amplifier switched with the M-key

Figure 3.1: Amplified Calling without answer. Amplifier switched with the M-key

2-43

Amplified Calling with answer in separate microphone

Amplifier constantly on

Figure 4.1: Amplified Calling with answer in separate microphone. Amplifier constantly on

2-45

Amplifier switched with the M-key

Figure 5.1: Amplified Calling with answer in separate microphone. Amplifier switched with M-key

2-47

Amplified Calling; answer in sep LS/PA switched with M-key 2-49

Amplified Calling with answer in called loudspeaker

Voice direction switched with M-key

Figure 7.1: Amplified Calling with answer in called loudspeaker. Voice direction switched with M-key

2-51

Amplifier and voice direction switched with the M-key

Figure 8.1: Amplified calling with answer in called loudspeaker. Amplifier and voice direction switched with the M-key

2-53

Amplified Calling with answer in separate loudspeaker in conjunction with a station

Amplifier switched with the M-key

Figure 9.1: Amplified calling with answer in separate loudspeaker in conjunction with a station. Amplifier switched with the M-key.

2-55

Amplified Calling with answer in called loudspeaker in conjunction with a station

Amplifier and voice direction switched with the M-key

Figure 10.1: Amplified Calling with answer in called loudspeaker in conjunction with a station. Amplifier and voice direction switched with the M-key