Actions

Difference between revisions of "TCIS Restore Factory Defaults"

From Zenitel Wiki
(→‎Reset to Factory Default - Static IP)
 
(37 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
+
{{AEIPS}}A Zenitel IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
  
−
==Reset to Factory Default Settings with Activated DHCP==
 
  
−
To reset:
+
==Reset to Factory Default - IP address from DHCP==
−
:1. While '''pressing any button''', power up the station by connecting to a PoE switch.
+
<div style="text-align:left;"> <youtube width="300" height="180">6Kph8SmbYYc</youtube> </div>
−
:2.  Hold the button until the station audio starts counting, and release the button on '''count 1'''.
+
<br><br>
−
:3.  Press and hold the button on '''count 5''' and release on '''count 0'''.
+
__NOTOC__
−
::- if there is no 0 count, the procedure has failed and you have to start again
+
During the factory Default procedure the station will count numbers in its loudspeaker.
−
:4.  Press the '''call button''' to make the station say its IP address.
 
  
−
[[File:TCIS Factory Reset 1.PNG|thumb|200px|left|Factory Default with IP address from DHCP server]]
+
# '''Press and hold any button''', then power up the station.
 +
# At the '''count 1''', release the button
 +
# At the '''count 5''' press and hold the button.
 +
# At the '''count 0''' release the button. If there is no 0 count, the procedure has failed and you have to start again
 +
 
 +
 
 +
After the station has started up, press the '''call button''', and the station will speak its IP address
 +
 
 +
[[File:TCIS Factory Reset 1.PNG|thumb|150px|left|Factory Default with IP address from DHCP server]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
=== Factory default values ===
+
===Factory default values===
−
:Station IP address: (determined by DHCP server)
+
 
−
:Username: '''admin'''
+
*Station IP address: Obtained from a DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
−
:Password: '''alphaadmin'''
+
*Username: '''admin'''
 +
*Password: '''alphaadmin'''
 +
*Mode of operation: '''Edge'''
  
 +
==Reset to Factory Default - Static IP==
 +
During the factory Default procedure the station will count numbers in its loudspeaker.
  
 +
# '''Press and hold any button''', then power up the station.
 +
# At the '''count 1''', release the button
 +
# At the '''count 3''' press and hold the button.
 +
# At the '''count 0''' release the button. If there is no 0 count, the procedure has failed and you have to start again
  
−
==Reset to Factory Default Settings with Static IP==
 
−
[[File:TCIS Factory Reset 2.PNG|thumb|200px|left|Factory Default with Static IP Address]]
 
−
<br style="clear:both;" />
 
  
−
To reset:
+
After the station has started up, press the '''call button''', and the station will speak its IP address
−
:1.  While '''pressing any button''', power up the station by connecting to a PoE switch.
 
−
:2.  Hold the button until the station audio starts counting, and release the button on '''count 1'''.
 
−
:3.  Press and hold the button on '''count 3''' and release on '''count 0'''.
 
−
::- if there is no 0 count, the procedure has failed and you have to start again
 
−
:4.  Press the '''call button''' to make the station say its IP address.
 
  
−
=== Factory default values ===
+
[[File:TCIS Factory Reset 2.PNG|thumb|150px|left|Factory Default with Static IP Address]]
−
Station IP address: '''169.254.1.100'''
+
<br style="clear:both;" />
−
Username: '''admin'''
 
−
Password: '''alphaadmin'''
 
  
 +
===Factory default values===
  
 +
*Station IP address: '''169.254.1.100'''
 +
*Username: '''admin'''
 +
*Password: '''alphaadmin'''
 +
*Mode of operation: '''Edge'''
  
−
[[Category:Turbine]]
+
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 11:22, 24 October 2023

AEIPS.png

A Zenitel IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.


Reset to Factory Default - IP address from DHCP



During the factory Default procedure the station will count numbers in its loudspeaker.

  1. Press and hold any button, then power up the station.
  2. At the count 1, release the button
  3. At the count 5 press and hold the button.
  4. At the count 0 release the button. If there is no 0 count, the procedure has failed and you have to start again


After the station has started up, press the call button, and the station will speak its IP address

Factory Default with IP address from DHCP server


Factory default values

  • Station IP address: Obtained from a DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
  • Username: admin
  • Password: alphaadmin
  • Mode of operation: Edge

Reset to Factory Default - Static IP

During the factory Default procedure the station will count numbers in its loudspeaker.

  1. Press and hold any button, then power up the station.
  2. At the count 1, release the button
  3. At the count 3 press and hold the button.
  4. At the count 0 release the button. If there is no 0 count, the procedure has failed and you have to start again


After the station has started up, press the call button, and the station will speak its IP address

Factory Default with Static IP Address


Factory default values

  • Station IP address: 169.254.1.100
  • Username: admin
  • Password: alphaadmin
  • Mode of operation: Edge
Retrieved from "https://wiki.zenitel.com/w/index.php?title=TCIS_Restore_Factory_Defaults&oldid=234501"