Difference between revisions of "TFIE Restore Factory Defaults"
From Zenitel Wiki
(Created page with "A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can eith...") |
(→Reset to Factory Default Settings with Static IP) |
||
(13 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | ||
− | =Reset to Factory Default Settings with Activated DHCP= | + | = Reset to Factory Default Settings with Activated DHCP = |
− | [[File:TFIE Factory Default1.PNG|thumb| | + | [[File:TFIE Factory Default1.PNG|thumb|130px|Factory Default with IP address from DHCP server]] |
+ | <div style="text-align:left;"> <youtube width="300" height="180">6Kph8SmbYYc</youtube> </div> | ||
+ | <br><br> | ||
+ | __NOTOC__ | ||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station by connecting to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting to a PoE switch. | ||
Line 10: | Line 13: | ||
:4. Press the '''call button''' to make the station say its IP address. | :4. Press the '''call button''' to make the station say its IP address. | ||
− | + | == Factory default values == | |
− | :Station IP address: | + | :Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address. |
:Username: '''admin''' | :Username: '''admin''' | ||
:Password: '''alphaadmin''' | :Password: '''alphaadmin''' | ||
Line 17: | Line 20: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | =Reset to Factory Default Settings with Static IP= | + | = Reset to Factory Default Settings with Static IP = |
− | [[File:TFIE Factory Default2.png|thumb| | + | [[File:TFIE Factory Default2.png|thumb|130px|Factory Default with Static IP Address]] |
+ | |||
To reset: | To reset: | ||
:1. While '''pressing any button''', power up the station by connecting to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting to a PoE switch. | ||
Line 26: | Line 30: | ||
:4. Press the '''call button''' to make the station say its IP address. | :4. Press the '''call button''' to make the station say its IP address. | ||
− | + | == Factory default values == | |
− | Station IP address: '''169.254.1.100''' | + | :Station IP address: '''169.254.1.100''' |
− | Username: '''admin''' | + | :Username: '''admin''' |
− | Password: '''alphaadmin''' | + | :Password: '''alphaadmin''' |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | [[Category:Turbine]] | + | [[Category: Turbine - Restore Factory Defaults and Software Upgrade]] |
Latest revision as of 11:23, 24 October 2023
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin