Actions

TKIE Connections: Difference between revisions

From Zenitel Wiki
No edit summary
 
(10 intermediate revisions by 2 users not shown)
Line 5: Line 5:
There are two RJ-45 ports located on the Turbine Extended Kit that are used for PoE/LAN Ethernet connection.
There are two RJ-45 ports located on the Turbine Extended Kit that are used for PoE/LAN Ethernet connection.


There are 6 I/O connection options for the Turbine Extended Kit. These connections are used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
There are 6 I/O connectors available on the Turbine Extended Kit. These connections are used as digital input (eg. from a closing contact) or LED driver output (12mA max).


{|border="1"
{|border="1"
Line 12: Line 12:
|Secondary Power || If PoE is not available, the Turbine Extended Kit can be powered from a 24-48 VDC local power supply.**  
|Secondary Power || If PoE is not available, the Turbine Extended Kit can be powered from a 24-48 VDC local power supply.**  
|-
|-
|Relays || There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
|Relays || Two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
|-
|-
|Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.  
|Input/Output || 6 I/Os are available. Each I/O can be configured as either input or a 12mA LED driver output.
|-
|-
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal
|}
|}


  '''Note!''' Use cables crimped with ferrules for terminal block connectors
  {{Note | Use cables crimped with ferrules for terminal block connectors}}


* When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
* When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
Line 35: Line 35:
[[File:TKIE Connections 1.PNG|thumb|left|250px|Turbine Extended Kit]]
[[File:TKIE Connections 1.PNG|thumb|left|250px|Turbine Extended Kit]]
<br style="clear:both;" />
<br style="clear:both;" />
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection.
There are two RJ-45 ports located on the Turbine Extended Kit that is used for PoE/LAN Ethernet connection.


=Optional Speaker/Microphone connector=
=Optional Speaker/Microphone connector=
Line 41: Line 41:
<br style="clear:both;" />
<br style="clear:both;" />


===Input/Output Connections===
 
There are 6 I/O connection options for the Turbine Compact Kit.
These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.


See also [[Turbine Extended Board Connectors]]
See also [[Turbine Extended Board Connectors]]
[[Category:Turbine Connections]]

Latest revision as of 08:58, 9 June 2023

TKIE-2.PNG

This article describes all Turbine Extended Kit connections.

There are two RJ-45 ports located on the Turbine Extended Kit that are used for PoE/LAN Ethernet connection.

There are 6 I/O connectors available on the Turbine Extended Kit. These connections are used as digital input (eg. from a closing contact) or LED driver output (12mA max).

Ethernet/Power The Turbine Extended Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.*
Secondary Power If PoE is not available, the Turbine Extended Kit can be powered from a 24-48 VDC local power supply.**
Relays Two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
Input/Output 6 I/Os are available. Each I/O can be configured as either input or a 12mA LED driver output.
Audio Line Out A balanced 600 ohm audio line out with induction loop signal
Note icon Use cables crimped with ferrules for terminal block connectors


  • When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
  • To make the kit speak its IP address:
- connect a speaker to the speaker output
- connect a button to input 1
- press the button after startup
TKIESpeakIP.png


Power Supply

The Turbine Extended Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Extended Kit can be connected to a 24 VDC local power supply.

Network Connection

Turbine Extended Kit


There are two RJ-45 ports located on the Turbine Extended Kit that is used for PoE/LAN Ethernet connection.

Optional Speaker/Microphone connector

Side connectors



See also Turbine Extended Board Connectors

Retrieved from "https://wiki.zenitel.com/w/index.php?title=TKIE_Connections&oldid=232916"
MediaWiki spam blocked by CleanTalk.