|
|
| (7 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | ==8022 - IP Substation== | + | ===Station LED=== |
| − | This chapter gives details about connections and indications for:
| + | {| |
| − | *IP Substation [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]
| + | |[[File:IP Substation Indication 1.PNG|thumb|200px|IP Substation LED]] |
| − | *IP Substation [[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
| + | |[[File:IP Substation Indication 2.PNG|thumb|200px|IP Substation (3gang) LED]] |
| − | *[[IP Heavy Duty Station - 1008072200]]
| + | |} |
| − | * IP Speaker - [[IP Ceiling Loudspeaker - 1401002100|1401002100]]/[[IP Horn Loudspeaker - 1401002500|1401002500]]
| |
| − | *[[IP Substation Kit - 1008090200]]
| |
| | | | |
| − | ===Connections===
| |
| − | [[File:IP Substation Main Board 1.PNG]]
| |
| − | <br/>
| |
| − | ====LAN port P1 & AUX port P2====
| |
| − | <u>'''P1:'''</u>
| |
| − |
| |
| − | RJ45 LAN connector for 10/100 Mbit Ethernet connection. The station can be powered from this connection if the line supports Power over Ethernet (PoE).
| |
| − |
| |
| − | <u>'''P2:'''</u>
| |
| − |
| |
| − | RJ45 connector for auxiliary equipment like IP camera, PC or a second IP station. This port does not have an individual IP address. It does not carry power for auxiliary equipment.
| |
| − | [[File:IP Master Board 1.PNG|left|thumb|200px|P1/P2]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ====P3 - External Loudspeaker, Relay Output and External Power Input====
| |
| − | [[File:IP Substation Main Board 3.PNG|left|thumb|200px|P3]]
| |
| − | <br style="clear:both;" />
| |
| − | 6-pin plug-on screw terminal for external connections.
| |
| − | :*Pin 1/2: Connected to station loudspeaker. May also be used for 8-20 ohm / 2W external loudspeaker in parallel.
| |
| − | :*Pin 3/4: Internal NO (Normally Open) relay contact for door lock control, etc. Contact rating: Current: max 1A. Voltage: max 60 VDC. Power: max 30 W DC.
| |
| − | :*Pin 5/6: Connected to 24 VDC for station power when power is not distributed via LAN. Pin 6 is positive.
| |
| − |
| |
| − | '''About the relay:''' The relay actually has a change-over contact. On the screw terminal you have NO (Normal Open) contact only, but NC (Normal Closed) contact is also available between connector P3 - pin 4 and the soldering pad '''TP7'''.
| |
| − |
| |
| − | [[File:TP7 IP Sub.PNG|left|350px|thumb|Location of TP7 when using NC contact]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ====P4 - Inputs and Station LED====
| |
| − | 6-pin plug-on screw terminal for internal connections.
| |
| − | [[File:IP Substation Main Board 4.PNG|left|thumb|200px|P4]]
| |
| − | <br style="clear:both;" />
| |
| − | :*Pin 1/4: Call button no. 1
| |
| − | :*Pin 2/4: Call button no. 2 or logical input
| |
| − | :*Pin 3/4: Call button no. 3 or logical input
| |
| − | :*Pin 5/6: Station LED for call and message information
| |
| − |
| |
| − | ====TP1/TP2 - Line Output====
| |
| − | 0 dB, 600 ohm balanced audio output for connection to a power amplifier.
| |
| − |
| |
| − | '''Note:'''
| |
| − | The amplifier input MUST BE AN AC COUPLED INPUT (transformer, capacitors, etc.).
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ====TP9 - Output====
| |
| − | Logical output for a spare relay driver, max. 30 mA.
| |
| − | [[File:IP Substation Main Board 2.PNG|left|thumb|200px|P1/P2]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ====Additional DAK-keys, M- and C-key====
| |
| − | The [[IP Substation Board Connection|IP substation board]] supports input for digits 0 - 9, 10 [[DAK|DAK-keys]], as well as [[M-key]] and [[C-key]]. The inputs are available on soldering pads on the substation PCB.
| |
| − | [[Image:IP sub test pad location.png|left|thumb|300px|Location of soldering pads on the substation PCB]]
| |
| | <br style="clear:both;" /> | | <br style="clear:both;" /> |
| − | DAK 1: N115 + N112
| + | '''Blinking at 1 second intervals:'''<br> |
| − | DAK 2: N115 + N113
| + | Station cannot register to the server/controller |
| − | DAK 3: N115 + N114
| |
| − | DAK 4: N105 + N110
| |
| − | DAK 5: N105 + N111
| |
| − | DAK 6: N105 + N112
| |
| − | DAK 7: N105 + N113
| |
| − | DAK 8: N105 + N114
| |
| − | DAK 9: N105 + N115
| |
| − | DAK 10: N106 + N110
| |
| − | -------------------
| |
| − | M-key: N115 + N111
| |
| − | C-key: N115 + N110
| |
| − | | |
| − | | |
| − | '''Inputs for digit keys'''
| |
| − | | |
| − | If more than 10 DAK keys are needed, it is possible to use the digit keys as DAK keys. The function needs to be enabled by the flag "Digit Key is DAK" in the [[Users_%26_Stations_%28AlphaPro%29#Station_Type|Users & Stations > Station Type]] menu in AlphaPro. The regular DAK keys are then moved to DAK 11 - 20.
| |
| − | | |
| − | Digit 0: N111 + N110
| |
| − | Digit 1: N112 + N110
| |
| − | Digit 2: N112 + N111
| |
| − | Digit 3: N113 + N110
| |
| − | Digit 4: N113 + N111
| |
| − | Digit 5: N113 + N112
| |
| − | Digit 6: N114 + N110
| |
| − | Digit 7: N114 + N111
| |
| − | Digit 8: N114 + N112
| |
| − | Digit 9: N114 + N113
| |
| − | | |
| − | | |
| − | '''The keyboard matrix'''
| |
| − | [[Image:IP station Keyboard matrix.png|left|thumb|300px|The keyboard matrix of the IP station]]
| |
| − | <br style="clear:both;" />
| |
| − | | |
| − | KEY0 = N110
| |
| − | KEY1 = N111
| |
| − | KEY2 = N112
| |
| − | KEY3 = N113
| |
| − | KEY4 = N114
| |
| − | KEY5 = N115
| |
| − | KEY6 = N105
| |
| − | KEY7 = N106
| |
| − | KEY8 = N107
| |
| − | | |
| − | ===Indications===
| |
| − | ====Station LED (on board and front plate)====
| |
| − | [[File:IP Substation Indication 1.PNG|left|thumb|200px|Station LED]]
| |
| − | <br style="clear:both;" />
| |
| − | [[File:IP Substation Indication 2.PNG|left|thumb|200px|Station LED]]
| |
| − | <br style="clear:both;" />
| |
| − | <u>'''Blinking at 1 second intervals:'''</u>
| |
| − | *Station has no connection to the AlphaCom XE Audio Server.
| |
| | | | |
| | Possible reasons: | | Possible reasons: |
| − | :*No connection to Ethernet
| + | * Invalid network settings (IP address and network mask) in the device |
| − | :*Wrong AlphaCom IP address configured
| + | * Wrong or missing account settings (Server IP, directory number, password..) |
| − | :*Invalid IP address
| + | * Failing to register due to missing license in the server |
| − | :*No gateway or wrong gateway to the AlphaCom XE Audio Server
| + | * The server is offline |
| | + | * Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP) |
| | + | If the server is on a different subnet, check that |
| | + | * A valid Default gateway is defined |
| | | | |
| − | <u>'''Blinking at 5 second intervals:'''</u>
| + | '''No blinking:''' |
| − | *Station connected but NOT registered in the AlphaCom XE Audio Server.
| |
| | | | |
| − | Reason:
| + | Possible reasons: |
| − | :*Station has not been programmed in AlphaPro
| + | * Station connected and registered to the server/controller |
| − | :*Missing IP Station license in AlphaCom XE Audio Server
| + | * Station not powered up (if no other LEDs are active) |
| | | | |
| − | <u>'''No blinking:'''</u>
| + | '''Blinking at 5 second intervals:'''<br/> |
| | + | {{Note| This LED behaviour only applies in ICX-AlphaCom mode}} |
| | + | Station connected but NOT registered in the ICX-AlphaCom |
| | | | |
| | Possible reasons: | | Possible reasons: |
| − | :*Station connected and registered to the AlphaCom XE Audio Server
| + | * Station has not been programmed in AlphaPro |
| − | :*Station not powered up (if no other LEDs are active)
| + | * Missing IP Station license in ICX-AlphaCom |
| − | | |
| − | ====Status LED====
| |
| − | Bicolor SMD LED on board component side.
| |
| − | [[File:IP Substation Indication 3.PNG|left|thumb|200px|Status LED]]
| |
| − | <br style="clear:both;" />
| |
| − | <u>'''Blinking 2 red + 1 green:'''</u>
| |
| − | :*Station has no connection to the AlphaCom XE Audio Server.
| |
| − | <u>'''Blinking 1 red + 2 green:'''</u>
| |
| − | :*Station connected but NOT registered in the AlphaCom XE Audio Server.
| |
| − | <u>'''Blinking 3 green:'''</u>
| |
| − | :*Station connected and registered in the AlphaCom XE Audio Server.
| |
| − | | |
| − | ====LAN LEDs====
| |
| − | <u>'''Left LED:'''</u>
| |
| − | [[File:IP Substation Indication 4.PNG|left|thumb|200px|Left LED]]
| |
| − | <br style="clear:both;" />
| |
| − | *Steady light: Ethernet connection OK
| |
| − | *Blinking: Ethernet traffic
| |
| − | *No light: No Ethernet connection
| |
| | | | |
| − | <u>'''Right LED:'''</u>
| + | [[Category:Station Indication LEDs]] |
| − | [[File:IP Substation Indication 5.PNG|left|thumb|200px|Right LED]] | |
| − | <br style="clear:both;" />
| |
| − | *Light: 100 Mbit Ethernet connection
| |
| − | *No light: 10 Mbit Ethernet connection
| |
