Difference between revisions of "IP Heavy Duty Connections"
From Zenitel Wiki
(→Connections) |
m (1 revision imported) |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 16: | Line 16: | ||
== Power Supply == | == Power Supply == | ||
| − | The IP Heavy Duty Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. | + | The [[IP Heavy Duty Station]] supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. |
| − | If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply. | + | If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply. |
== Connections == | == Connections == | ||
| Line 30: | Line 30: | ||
**Pin 3/4: Internal NO relay contact for additional call indication, etc. | **Pin 3/4: Internal NO relay contact for additional call indication, etc. | ||
**Pin 5/6: Connect 24VDC power supply if PoE is not used | **Pin 5/6: Connect 24VDC power supply if PoE is not used | ||
| − | [[File:IP Substation Main Board 1.PNG|300px|]] | + | [[File:IP Substation Main Board 1.PNG|300px|right|thumb]] |
* '''P4''': 6-pin plug-on screw terminal for internal connections. | * '''P4''': 6-pin plug-on screw terminal for internal connections. | ||
**Pin 1/4: Input for PTT from headset and restoring Factory Default Setting. | **Pin 1/4: Input for PTT from headset and restoring Factory Default Setting. | ||
Latest revision as of 14:10, 5 February 2018
Main connectors
To access these connectors the frontplate must be removed.
| LAN | 10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| AUX | 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. |
| Input/Output | Pluggable screw terminal |
| Local Power | Plugable screw terminal, 19-27 VDC Idle 4W, max. 8W |
Power Supply
The IP Heavy Duty Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply.
Connections
There are four connectors on the IP heavy Duty station PCB: P1-P4.
- P1 RJ45 LAN port is for connecting to the data network
- P2: RJ45 AUX port is for connecting to auxiliary equipment such as a PC
- P3: 6-pin plug-on screw terminal for external connections.
- Pin 1/2: Connection of external 8 ohm loudspeaker (optional).
- Pin 3/4: Internal NO relay contact for additional call indication, etc.
- Pin 5/6: Connect 24VDC power supply if PoE is not used
- P4: 6-pin plug-on screw terminal for internal connections.
- Pin 1/4: Input for PTT from headset and restoring Factory Default Setting.
- Pin 2/4: Call button no. 2 or logical input (optional).
- Pin 3/4: Connected to hook-switch (reed-switch)
- Pin 5/6: Station LED for call and message info. (Pin 6 is positive.)
- TP1/2: Audio output to handset speaker (0 dB, 600 ohm balanced).
For more details see INCA Substation Board Connectors.