IP Flush Master Station LED Indications: Difference between revisions

Latest revision as of 11:24, 20 November 2020

Station LED

Blinking at 1 second intervals:
Station cannot register to the server/controller

Possible reasons:

Invalid network settings (IP address and network mask) in the device
Wrong or missing account settings (Server IP, directory number, password..)
Failing to register due to missing license in the server
The server is offline
Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)

If the server is on a different subnet, check that

A valid Default gateway is defined

No blinking:

Possible reasons:

Station connected and registered to the ICX-AlphaCom
Station not powered up (if no other LEDs are active)

Blinking at 5 second intervals:

This LED behaviour only applies to INCA Desktop stations 1008031000 and 1008015000 in ICX-AlphaCom mode

Station connected but NOT registered in the ICX-AlphaCom

Possible reasons:

Station has not been programmed in AlphaPro
Missing IP Station license in ICX-AlphaCom

@@ Line 3: / Line 3: @@
 <br style="clear:both;" />
 '''Blinking at 1 second intervals:'''<br/>
-Station has no connection to the AlphaCom XE Audio Server.
+Station cannot register to the server/controller
 Possible reasons:
-* No connection to Ethernet
+* Invalid network settings (IP address and network mask) in the device
-* Wrong AlphaCom IP address configured
+* Wrong or missing account settings (Server IP, directory number, password..)
-* Invalid IP address
+* Failing to register due to missing license in the server
-* No gateway or wrong gateway to the AlphaCom XE Audio Server
+* The server is offline
+* Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
-'''Blinking at 5 second intervals:'''<br/>
+If the server is on a different subnet, check that
-Station connected but NOT registered in the AlphaCom XE Audio Server.
+* A valid Default gateway is defined
-Possible reasons:
-* Station has not been programmed in AlphaPro
-* Missing IP Station license in AlphaCom XE Audio Server
 '''No blinking:'''
 Possible reasons:
-* Station connected and registered to the AlphaCom XE Audio Server
+* Station connected and registered to the ICX-AlphaCom
 * Station not powered up (if no other LEDs are active)
-== Status LED ==
+'''Blinking at 5 second intervals:'''<br/>
-LED3 – Bicolor SMD LED on board component side.
+{{Note| This LED behaviour only applies to INCA Desktop stations [[IP Flush Master - 1008031000|1008031000]] and [[IP OR Master Station - 1008015000|1008015000]] in ICX-AlphaCom mode}}
-[[File:MasterStationKit Indications1.png|left|thumb|400px|Status LED]]
+Station connected but NOT registered in the ICX-AlphaCom
-<br style="clear:both;" />
-'''Blinking 2 red + 1 green:'''<br>
-* Station has no connection to the AlphaCom XE Audio Server.
-'''Blinking 1 red + 2 green:'''<br>
-* Station connected but NOT registered in the AlphaCom XE Audio Server.
-'''Blinking 3 green:'''
-* Station connected and registered in the AlphaCom XE Audio Server.
-== Power LED ==
-LED6 – Yellow SMD LED on board component side.
-[[File:MasterStationKit Indications2.png|left|thumb|400px|Power LED]]
-<br style="clear:both;" />
-* Light:  13VDC board power OK.
-* No light:  13VDC board power faulty if no other LEDs are lit.
 Possible reasons:
-* 24 VDC or PoE not connected
+* Station has not been programmed in AlphaPro
-* Faulty board
+* Missing IP Station license in ICX-AlphaCom
-== LAN LEDs ==
-'''Left LED:'''<br>
-[[File:IP Master Indications 4.PNG|left|thumb|200px|Left LED]]
-<br style="clear:both;" />
-* Steady light:  Ethernet connection OK
-* Blinking:     Ethernet traffic
-* No light:    No Ethernet connection
-'''Right LED:'''<br>
-[[File:IP Master Indications 5.PNG|left|thumb|200px|Right LED]]
-<br style="clear:both;" />
-* Light:    100 Mbit Ethernet connection
-* No light:  10 Mbit Ethernet connection
-[[Category:INCA Indication LEDs]]
+[[Category:Station Indication LEDs]]

IP Flush Master Station LED Indications: Difference between revisions

From Zenitel Wiki

Latest revision as of 11:24, 20 November 2020

Station LED