Actions

Difference between revisions of "Virtual IO - Examples"

From Zenitel Wiki

(→‎Ohter scripts for Relay operation)
(→‎Related articles)
 
(19 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
{{PS}}
 
{{PS}}
−
[[Virtual I/O (Pulse/SIP)|Virtual I/O]] is a feature for activating scripts on station events.
+
Virtual I/O is a feature for activating scripts on station events.
  
−
The scripts mentioned in this article can be [[Downloads#Virtual_I.2FO_-_Sample_scripts|downloaded here]].
+
The scripts mentioned in this article can be [[Downloads#Stations_and_Devices|downloaded]] under the '''Stations and Devices''' chapter.
  
−
== Door Opening - Operating a relay located in safe area ==
+
{{obs|
−
[[File:ScriptRelayExample.PNG|right|thumb|350px|Example of using Vitual IO to cotrol the relay of another unit]]
+
* ''As from version 4.11.3.1 for Pulse and version 5.1.3.0 for IC-EDGE Virtual I/Os are by default disabled. To enable, enter in the web browser the url "http://<IP Address>/goform/zForm_webcall", and check the flag '''Enable Web Call and Relay'''}}
 +
 
 +
== Lua scripts for version 4.2.x.x==
 +
=== Door Opening - Operating a relay located in safe area ===
 +
[[File:ScriptRelayExample.PNG|right|thumb|450px|Example of using Vitual IO to control the relay of another unit]]
 
Due to security requirements it is sometimes not allowed to operate the door lock from the relay in the Turbine station at the door.  
 
Due to security requirements it is sometimes not allowed to operate the door lock from the relay in the Turbine station at the door.  
  
Line 19: Line 23:
  
 
The ''RelayTimer_v1.lua'' script requires 4 parameters:
 
The ''RelayTimer_v1.lua'' script requires 4 parameters:
−
lua RelayTimer_v1.lua <username> <password> <Station IP address> <Timer>
+
{{Code|lua RelayTimer_v1.lua <username> <password> <Station IP address> <Timer>}}
 
:- <username> is by default ''admin''
 
:- <username> is by default ''admin''
 
:- <password> is by default ''alphaadmin''
 
:- <password> is by default ''alphaadmin''
Line 34: Line 38:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
=== Ohter scripts for Relay operation ===
+
=== Other scripts for Relay operation ===
 
There are three different scripts for relay control.  
 
There are three different scripts for relay control.  
 
* '''RelayTimer_v1.lua''': Pulse the relay for a set time. The required parameters are described earlier in this article.
 
* '''RelayTimer_v1.lua''': Pulse the relay for a set time. The required parameters are described earlier in this article.
Line 40: Line 44:
 
* '''RelayOff_v1.lua''': Turn relay OFF
 
* '''RelayOff_v1.lua''': Turn relay OFF
  
−
The scripts can control the relay both in [[:Category:INCA Stations|INCA stations]] and in [[:Category:Turbine|Turbine stations]].
+
The scripts can control the relay both in [[:Category:Stations#INCA_stations|INCA stations]] and in [[:Category:Stations#Turbine_stations|Turbine stations]].
  
−
The ''RelayOn_v1.lua'' and the ''RelayOff_v1.lua'' scripts requires 3 parameters:
+
Both the ''RelayOn_v1.lua'' and the ''RelayOff_v1.lua'' scripts require 3 parameters:
−
lua RelayOn_v1.lua <username> <password> <Station IP address>
+
{{Code|lua RelayOn_v1.lua <username> <password> <Station IP address>}}
 
:- <username> is by default ''admin''
 
:- <username> is by default ''admin''
 
:- <password> is by default ''alphaadmin''
 
:- <password> is by default ''alphaadmin''
 
:- <Station IP address> is the IP address in dot notation
 
:- <Station IP address> is the IP address in dot notation
 +
 +
== Lua scripts for version 4.7 and newer ==
 +
=== OutputTimer_v47 ===
 +
Parameters:
 +
* Turbine station username
 +
* Turbine station password
 +
* IP address for target Turbine station
 +
* Valid inputs are relay1-2 or output 1-6
 +
* Timer for relay ON in seconds
 +
 +
=== ActivateOutput_v47 ===
 +
Parameters:
 +
* Turbine station username
 +
* Turbine station password
 +
* Valid inputs are relay1-2 or output 1-6
 +
* IP address for target Turbine station
 +
 +
=== DeactivateOutput_v47 ===
 +
Parameters:
 +
* Turbine station username
 +
* Turbine station password
 +
* Valid inputs are relay1-2 or output 1-6
 +
* IP address for target Turbine station
 +
 +
=== CallHangup ===
 +
Parameters:
 +
* Turbine station username
 +
* Turbine station password
 +
* IP address for target Turbine station
  
 
==TruPortal Integration==
 
==TruPortal Integration==
Line 104: Line 137:
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 +
==Related articles==
 +
* [[Virtual I/O (Pulse)|Virtual I/O - Pulse mode]]
 +
* [[Virtual I/O (SIP)|Virtual I/O - SIP mode]]
 +
* [[Scripts (Edge)]]
  
 
[[Category: Pulse - Configuration]]
 
[[Category: Pulse - Configuration]]
 
[[Category: SIP intercom - Configuration]]
 
[[Category: SIP intercom - Configuration]]

Latest revision as of 12:23, 18 October 2024

PS.png

Virtual I/O is a feature for activating scripts on station events.

The scripts mentioned in this article can be downloaded under the Stations and Devices chapter.

OBS icon
  • As from version 4.11.3.1 for Pulse and version 5.1.3.0 for IC-EDGE Virtual I/Os are by default disabled. To enable, enter in the web browser the url "http://<IP Address>/goform/zForm_webcall", and check the flag Enable Web Call and Relay


Lua scripts for version 4.2.x.x

Door Opening - Operating a relay located in safe area

Example of using Vitual IO to control the relay of another unit

Due to security requirements it is sometimes not allowed to operate the door lock from the relay in the Turbine station at the door.

Instead of operating the relay in the door station, one can use the "Virtual I/O" feature to control the relay of a remote I/O unit (e.g. TKIS-2 unit) which is located in a secure area.

The script RelayTimer_v1.lua can be used for this prupose. The script let you pulse a relay of a remote unit for a set time.

  • Download and unzip the script
  • Select SIP Configuration > Script Upload, and click Browse to upload the script to the station
Upload the script to the station


The RelayTimer_v1.lua script requires 4 parameters:

lua RelayTimer_v1.lua <username> <password> <Station IP address> <Timer>


- <username> is by default admin
- <password> is by default alphaadmin
- <Station IP address> is the IP address in dot notation
- <Timer> is the relay pulse time in seconds
  • Configure the script with the required parameters. Select SIP Configuration > Script Configuration
When this script is triggered, the relay of station 10.5.101.149 will be pulsed for 3 seconds


  • Finally you need to define which event should trigger the script. Select SIP Configuration > Script Events:
When pressing digit "5", the script is triggered


Other scripts for Relay operation

There are three different scripts for relay control.

  • RelayTimer_v1.lua: Pulse the relay for a set time. The required parameters are described earlier in this article.
  • RelayOn_v1.lua: Turn relay ON
  • RelayOff_v1.lua: Turn relay OFF

The scripts can control the relay both in INCA stations and in Turbine stations.

Both the RelayOn_v1.lua and the RelayOff_v1.lua scripts require 3 parameters:

lua RelayOn_v1.lua <username> <password> <Station IP address>


- <username> is by default admin
- <password> is by default alphaadmin
- <Station IP address> is the IP address in dot notation

Lua scripts for version 4.7 and newer

OutputTimer_v47

Parameters:

  • Turbine station username
  • Turbine station password
  • IP address for target Turbine station
  • Valid inputs are relay1-2 or output 1-6
  • Timer for relay ON in seconds

ActivateOutput_v47

Parameters:

  • Turbine station username
  • Turbine station password
  • Valid inputs are relay1-2 or output 1-6
  • IP address for target Turbine station

DeactivateOutput_v47

Parameters:

  • Turbine station username
  • Turbine station password
  • Valid inputs are relay1-2 or output 1-6
  • IP address for target Turbine station

CallHangup

Parameters:

  • Turbine station username
  • Turbine station password
  • IP address for target Turbine station

TruPortal Integration

By using Virtual I/O the Pulse system trigger a script that can control the door lock in a TruPortal system.

Upload the script

VIO 11 1 v1.PNG


Script configuration
TruPortal script requires 4 parameters:

  • username
  • password
  • TruPortal device IP address
  • Door number to activate
VIO 11 2 v1.PNG


Script Event assignement
After a script slot has been created the user can choose which event(s) which will start the script.

VIO 11 3 v1.PNG


Milestone Integration

By using Virtual I/O the Pulse system trigger a script that can control the Milestone Video Management System. In this example we want to activate a camera when the Turbine station calls the reception. The camera should switch off when the conversation ends.

Upload the script

VIO 21 1 v1.PNG


Script configuration
Milestone script requires 3 parameters:

  • Milestone server IP address
  • TCP port number
  • "Text" to send (example "Cam105")
Send command to switch to camera for station 105


A second slot is needed to deactivate the camera. Same parameters with text changed to "CamOff".

  • Milestone server IP address
  • TCP port number
  • "Text" to send (example "CamOff")
Send command to deactivate camera for station 105


Script Event assignement
After a script slot has been created the user can choose which events which will start the script.

VIO 21 3 v1.PNG


Related articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Virtual_IO_-_Examples&oldid=237741"