Difference between revisions of "ITSV-1 - Software Upgrade"

Latest revision as of 14:04, 14 June 2021

This article describes how to upgrade the software of the ITSV-1 station via the web interface of the station.

Procedure

Download the software file gxv3240fw.bin to your PC.
Log on to the ITSV-1 Station web interface.
Select Maintenance > Upgrade, and choose "Firmware Upgrade Via:" Manual Upload
Select Upload, and browse to the gxv3240fw.bin file

Upload new software via the station web interface

The file will now be uploaded to the station. The web interface shows "Uploading..." during this process. When the file has been uploaded (approx. 5 minutes), the station will shut down and install the software. The installation progress is shown in the display of the station (0 - 100 %). When the installation is finished, it will start up using the new software.

How to find the..

IP Address: On the station touch display, select Settings. Scroll down to About phone, and then down to IP Address.
Current software version: On the station touch display, select Settings. Scroll down to About phone, and then down to System version.

@@ Line 1: / Line 1: @@
-{{APS}}This article describes how to upgrade the software of the [[ITSV-1 station]] via the web interface of the station.
+{{AEIPS}}This article describes how to upgrade the software of the [[ITSV-1|ITSV-1 station]] via the web interface of the station.
 ==Procedure==
-# [[Downloads#ITSV-1_station|Download]] the software file '''gxv3240fw_1.0.3.179.bin''' to your PC.
+# [[Downloads#Stations_and_Devices|Download]] the software file '''gxv3240fw.bin''' to your PC.
-# Log on to the ITSV-1 Station web interface. Default login credentials are '''admin''' and '''alphaadmin'''
+# Log on to the ITSV-1 Station web interface.
 # Select '''Maintenance''' > '''Upgrade''', and choose "Firmware Upgrade Via:" '''Manual Upload'''
-# Select '''Upload''', and browse to the '''gxv3240fw_1.0.3.179.bin''' file
+# Select '''Upload''', and browse to the '''gxv3240fw.bin''' file
 [[File:ITSV upgrade.png|thumb|left|500px|Upload new software via the station web interface]]
 <br style="clear:both;" />
-The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
+The file will now be uploaded to the station. The web interface shows "''Uploading...''" during this process. When the file has been uploaded (approx. 5 minutes), the station will shut down and install the software. The installation progress is shown in the display of the station (0 - 100 %). When the installation is finished, it will start up using the new software.
-==Upgrade from version 3.1, 4.0, 4.1==
+== How to find the.. ==
-For upgrade from version 3.1, 4.0, 4.1 see article: [[Upgrade Turbine stations from 3.1, 4.0 or 4.1]]
+* '''IP Address''': On the station touch display, select '''Settings'''. Scroll down to '''About phone''', and then down to '''IP Address'''.
+* '''Current software version''': On the station touch display, select '''Settings'''. Scroll down to '''About phone''', and then down to '''System version'''.
-==Troubleshooting==
-In the case the upgrade is not successful it may be due to a windows setting.
-*For Windows XP: [http://www.sysprobs.com/enable-ping-in-xp http://www.sysprobs.com/enable-ping-in-xp]
-*For Windows7: [http://www.sysprobs.com/enable-ping-reply-windows-7 http://www.sysprobs.com/enable-ping-reply-windows-7]
-*For Windows10: [http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server http://www.sysprobs.com/enable-ping-reply-and-ftp-traffic-in-windows-10-and-server]
 [[Category: Turbine - Restore Factory Defaults and Software Upgrade]]
+[[Category:INCA - Restore Factory Defaults and Software Upgrade]]

Difference between revisions of "ITSV-1 - Software Upgrade"

From Zenitel Wiki

Latest revision as of 14:04, 14 June 2021

Procedure

How to find the..