Difference between revisions of "INCA 2.8 - Release Notes"
From Zenitel Wiki
(→Bugfixes and Improvements 2.8.3.1) |
|||
| (19 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
== Release info == | == Release info == | ||
'''Name:''' VSF-INCA <br> | '''Name:''' VSF-INCA <br> | ||
| − | '''Description:''' VSF-INCA is a firmware archive for all [[:Category: | + | '''Description:''' VSF-INCA is a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices: |
'''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO''' and '''IP Dual Display Station'''.<br> | '''IP Desktop Master Station''', '''IP Substation''', '''IP Vandal Resistant Station''', '''IPARIO''' and '''IP Dual Display Station'''.<br> | ||
The firmware is delivered in two different ZIP archives: | The firmware is delivered in two different ZIP archives: | ||
* A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices | * A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices | ||
* A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station | * A100G802'''D'''0.02_08_X_X - Used for IP Dual Display Station | ||
| − | '''Version:''' 02.08.3. | + | '''Version:''' 02.08.3.3 <br> |
| − | '''Date:''' | + | '''Date:''' 22.02.2019 <br> |
'''Status:''' General Availability (GA) <br> | '''Status:''' General Availability (GA) <br> | ||
'''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Vingtor-Stentofon AlphaWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]] | '''Note:''' Release notes for the '''Video module''' component in [[IP Desktop Station with Video Display - 1408001635|IP Desktop Station with Video Display (1408001635)]] can be found in separate document on Vingtor-Stentofon AlphaWiki page [[IP Desktop with Video Display - Release Notes|IP Desktop with Video Display - Release Notes]] | ||
<br><br> | <br><br> | ||
| − | |||
| − | |||
| − | |||
| − | === | + | == Version 2.8.3.3 == |
| − | + | ===Bugfixes and Improvements === | |
| − | + | ====MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode==== | |
| + | This has now been fixed. | ||
| − | == | + | ===Known Issues === |
| − | + | ==== MTN-1052 PTT does not work between Gateway and INCA station==== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | === MTN-1052 PTT does not work between Gateway and INCA station=== | ||
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. | Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. | ||
If call is made between Turbine and Gateway, PTT works as expected. | If call is made between Turbine and Gateway, PTT works as expected. | ||
| − | === MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C=== | + | ==== MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C==== |
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode. | When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode. | ||
| − | === MTN-817 IP Video Desktop does not indicate private/open mode=== | + | ==== MTN-817 IP Video Desktop does not indicate private/open mode==== |
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in. | There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in. | ||
| − | === MTN-482 Transfer function doesn't work with Cisco CCM=== | + | ==== MTN-482 Transfer function doesn't work with Cisco CCM==== |
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated. | When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated. | ||
| − | === MTN-598 IP station fails to register if Hebrew name is too long=== | + | ==== MTN-598 IP station fails to register if Hebrew name is too long==== |
More than 12 characters entered causes registration problems | More than 12 characters entered causes registration problems | ||
| − | === MTN-268 Relay follow M-key cannot handle quick M=== | + | ==== MTN-268 Relay follow M-key cannot handle quick M==== |
Relay configured to follow M-key does not handle quick press on M-key | Relay configured to follow M-key does not handle quick press on M-key | ||
| + | |||
| + | |||
| + | == Version 2.8.3.2 == | ||
| + | === New Features=== | ||
| + | ==== MTN-1213 In-call automatic failover to redundant SIP server==== | ||
| + | Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server. | ||
| + | |||
| + | <br> | ||
| + | |||
| + | == Version 2.8.3.1 == | ||
| + | ===Bugfixes and Improvements === | ||
| + | ==== MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA ==== | ||
| + | The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept. | ||
| + | |||
| + | |||
| + | |||
| + | == Version 2.8.3.0 == | ||
| + | === New Features=== | ||
| + | ==== SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress ==== | ||
| + | Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960. | ||
| + | |||
| + | ==== SNOW-278 IP Multicast audio support for SIP Intercom ==== | ||
| + | Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured. | ||
| + | |||
| + | ===Bugfixes and Improvements === | ||
| + | ====SNOW-240 StationWeb - inconsistent location of Keyboard Settings page==== | ||
| + | Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode | ||
| + | |||
| + | |||
| + | |||
[[Category: Release notes]] | [[Category: Release notes]] | ||
Latest revision as of 13:31, 28 February 2019
Contents
- 1 Release info
- 2 Version 2.8.3.3
- 2.1 Bugfixes and Improvements
- 2.2 Known Issues
- 2.2.1 MTN-1052 PTT does not work between Gateway and INCA station
- 2.2.2 MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C
- 2.2.3 MTN-817 IP Video Desktop does not indicate private/open mode
- 2.2.4 MTN-482 Transfer function doesn't work with Cisco CCM
- 2.2.5 MTN-598 IP station fails to register if Hebrew name is too long
- 2.2.6 MTN-268 Relay follow M-key cannot handle quick M
- 3 Version 2.8.3.2
- 4 Version 2.8.3.1
- 5 Version 2.8.3.0
Release info
Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices:
IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:
- A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
- A100G802D0.02_08_X_X - Used for IP Dual Display Station
Version: 02.08.3.3
Date: 22.02.2019
Status: General Availability (GA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Vingtor-Stentofon AlphaWiki page IP Desktop with Video Display - Release Notes
Version 2.8.3.3
Bugfixes and Improvements
MTN-2289 Two gong signals applied instead of one for group calls in Pulse mode
This has now been fixed.
Known Issues
MTN-1052 PTT does not work between Gateway and INCA station
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.
MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
MTN-817 IP Video Desktop does not indicate private/open mode
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
MTN-482 Transfer function doesn't work with Cisco CCM
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.
MTN-598 IP station fails to register if Hebrew name is too long
More than 12 characters entered causes registration problems
MTN-268 Relay follow M-key cannot handle quick M
Relay configured to follow M-key does not handle quick press on M-key
Version 2.8.3.2
New Features
MTN-1213 In-call automatic failover to redundant SIP server
Improvements were done for parallel registration mode with backup SIP domains resulting in automatic and almost instant in-call failover to a backup SIP server. If the station is registered to multiple servers it will try the next server automatically if the call setup fails. If the station fails to register to all available SIP servers, it can be configured with registration retry "burst mode" interval so it gets connected immediately to a first available server.
Version 2.8.3.1
Bugfixes and Improvements
MTN-2044 Wrong volume applied on boot in SIP/Pulse mode on INCA
The volume would always be set to 0 no matter what the last configured volume was. This is now fixed, and the configured volume will be kept.
Version 2.8.3.0
New Features
SNOW-191 Support SIP Early Media during 180-Ringing or 183-Session Progress
Support playing a media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where server shall generate a media to be played during session progress and before call is accepted (e.g. Call queued before answered). Note that we do not fully support RFC3960.
SNOW-278 IP Multicast audio support for SIP Intercom
Turbine and INCA IP intercom stations now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.
Bugfixes and Improvements
SNOW-240 StationWeb - inconsistent location of Keyboard Settings page
Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode