Actions

Difference between revisions of "SNMP in IP Stations"

From Zenitel Wiki

(→‎SNMP Get)
 
(44 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
{{S}}
+
{{AEIPS}}
−
Stentofon IP devices ([[:Category:INCA Stations|INCA stations]], [[:Category:Turbine|Turbine stations]], [[:Category:Public Address - Network amplifiers|ENA Amplifiers]]) run a SNMP service and supports SNMP polling and SNMP traps when used in '''SIP mode'''.  
+
Zenitel IP devices run a SNMP service and support SNMP polling and SNMP traps.
  
  
 
==Stentofon OID numbers==
 
==Stentofon OID numbers==
−
Zenitel Norway AS has assigned a Private Enterprise Number OID 26122. and the IP-stations use sub OID 2.  
+
Zenitel Norway AS has assigned a Private Enterprise Number OID 26122 and the IP-stations use sub OIDs 2,3 and 4.
−
<br>
 
  
−
==SNMP Get==
+
All Zenitel OIDs definitions can be found in [[Downloads#SNMP_MIB_files|VS-DEVICE-MIB]]. MIB overview and all OID descriptions are also available at the [[SNMP in IP Stations#Object Identifier (OID) Numbers|end of this document]].
  
−
{{Note|SNMP GET via the VS-DEVICE-MIB file is supported only when the station is set to operate in '''SIP mode'''}}
+
In addtion to VS-DEVICE-MIB following built in MIBs are also available (not all available for INCA stations): SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB, UDP-MIB, HOST-RESOURCES-MIB, NOTIFICATION-LOG-MIB, DISMAN-EVENT-MIB, DISMAN-SCHEDULE-MIB, UCD-SNMP-MIB, UCD-DEMO-MIB, SNMP-TARGET-MIB, NET-SNMP-AGENT-MIB, HOST-RESOURCES-TYPES, NET-SNMP-PASS-MIB, NET-SNMP-EXTEND-MIB, UCD-DLMOD-MIB, SNMP-MPD-MIB, SNMP-USER-BASED-SM-MIB, SNMP-FRAMEWORK-MIB, SNMP-VIEW-BASED-ACM-MIB, SNMP-COMMUNITY-MIB, IP-FORWARD-MIB, SNMP-NOTIFICATION-MIB, SNMPv2-TM, NET-SNMP-VACM-MIB<br>
  
−
When the station operates in AlphaCom mode the SNMP service is still running, but only generic SNMP Get is supported, i.e. Linux snmpget for CPU usage, memory etc.
+
==SNMP Configuration==
−
For Turbine stations in AlphaCom mode, you can configure SNMP from the station web (Advanced Network > SNMP). For INCA stations, you need to set the station in SIP mode, enable SNMP, and set it back to AlphaCom mode.  
+
SNMP is configured from the station web: '''Advanced Network''' > '''SNMP'''.
  
−
Link to [[Downloads#SNMP_MIB_files|download VS-DEVICE-MIB]]
+
[[File:SNMP1.png|thumb|left|700px|SNMP Configuration]]
 +
<br style="clear:both;" />
  
−
===Scalar groups===
+
'''SNMP Settings'''
−
Tables below shows all IP Station scalar groups and their objects.  
+
 
 +
*'''Access''': read or none are available, setting none will disable SNMP
 +
*'''SNMP v1/v2c''': selects SNMP version used, '''one or both need to be selected for SNMP to work'''
 +
*'''Community string''': string used as password for authentication. Use alphanumeric characters. As from firmware 8.1.3.0 also special characters ''':$#@_?!,-.*'''' are allowed.
 +
*'''Allowed Network''': this is used, together with the network mask, to determine the allowed network for reading the MIB on the station. The IP address is entered in regular dot notation, e.g. 10.5.2.100. For example with an allowed network 10.5.2.0 and a network mask of 24, any station with an IP address in the range 10.5.2.0 to 10.5.2.255 can access the MIB. Setting '''0.0.0.0/0''' will allow all
 +
*'''Name''': SNMP name string (sent as sysName OID in traps)
 +
*'''Location''': SNMP Location string
 +
*'''Contact''': SNMP Contact string
 +
 
 +
'''SNMP Trap and Informs Settings'''
 +
 
 +
*Traps/informs receiving server address can be set here
 +
*If left blank it will disable sending traps/informs
 +
 
 +
'''SNMP Custom Configuration File'''
 +
 
 +
*Custom '''snmpd.conf''' file can be uploaded and used on the device
 +
*File is kept during device SW upgrades
 +
*File syntax and content are not checked and if errors are present in the file it can render SNMP inoperative
 +
*When custom file is uploaded SNMP Settings are unavailable
 +
*File can be viewed or downloaded
 +
*New file can be uploaded at any time
 +
*When custom file is deleted, the device will revert back to configuration defined in web config
 +
 
 +
'''Enable SNMP Traps'''
 +
 
 +
*Available traps (notifications) depend on device type and mode
 +
*If specific event occurs and corresponding SNMP Trap is enabled, notification (trap) will be generated and sent to trap/inform receiver IP address
 +
*[[SNMP in IP Stations#Alarm/Fault Notifications (Traps)|Traps descriptions]]
 +
 
 +
===Custom Faults===
 +
Custom faults are available only on [[:category:Public Address - Network amplifiers|ENA amplifiers]] in Edge/SIP/Pulse or Exigo (configurable through EMT) mode. When RCI is triggered, the device will send SNMP Trap with custom fault description and priority.
 +
 
 +
Configuration for faults is available in web Amplifier Settings -> RCO/RCI Config (or IO Monitoring). For custom faults to be sent traps have to be enabled in config (Advanced Network → SNMP → Enable SNMP Traps → Custom Fault){{Note|Available only on [[:category:Public Address - Network amplifiers|ENA amplifiers]]}}
 +
 
 +
[[File:Custom faults.png]]
 +
 
 +
==Object Identifier (OID) Numbers==
 +
Zenitel Norway AS OID is 26122 (stentofon) → 1.3.6.1.4.1.26122
 +
 
 +
===Overview===
 
{| class="wikitable"
 
{| class="wikitable"
−
! colspan="5" | general (1.3.6.1.4.1.26122.2.1)
+
!'''Name'''
 +
!'''OID'''
 +
|-
 +
|'''ipstation'''
 +
|1.3.6.1.4.1.26122.'''2'''
 +
|-
 +
|      general
 +
|1.3.6.1.4.1.26122.2.'''1'''
 +
|-
 +
|      registration
 +
|1.3.6.1.4.1.26122.2.'''2'''
 +
|-
 +
|      call
 +
|1.3.6.1.4.1.26122.2.'''3'''
 +
|-
 +
|      alarmObjects
 +
|1.3.6.1.4.1.26122.2.'''4'''
 +
|-
 +
|      alarmNotifications
 +
|1.3.6.1.4.1.26122.2.'''5'''
 +
|-
 +
|      faultNotifications
 +
|1.3.6.1.4.1.26122.2.'''8'''
 +
|-
 +
|'''vsDevice'''
 +
|1.3.6.1.4.1.26122.'''3'''
 +
|-
 +
|      info
 +
|1.3.6.1.4.1.26122.3.'''1'''
 +
|-
 +
|      temp
 +
|1.3.6.1.4.1.26122.3.'''2'''
 +
|-
 +
|      fan
 +
|1.3.6.1.4.1.26122.3.'''3'''
 +
|-
 +
|      voltage
 +
|1.3.6.1.4.1.26122.3.'''4'''
 +
|-
 +
|      power
 +
|1.3.6.1.4.1.26122.3.'''5'''
 +
|-
 +
|      lineIn
 +
|1.3.6.1.4.1.26122.3.'''6'''
 +
|-
 +
|      ampChannel
 +
|1.3.6.1.4.1.26122.3.'''7'''
 +
|-
 +
|      letStatus
 +
|1.3.6.1.4.1.26122.3.'''8'''
 +
|-
 +
|           letChannel1
 +
|1.3.6.1.4.1.26122.3.8.'''1'''
 +
|-
 +
|           letChannel2
 +
|1.3.6.1.4.1.26122.3.8.'''2'''
 +
|-
 +
|      controlInput
 +
|1.3.6.1.4.1.26122.3.'''9'''
 +
|-
 +
|      controlOutput
 +
|1.3.6.1.4.1.26122.3.'''10'''
 +
|-
 +
|      eth
 +
|1.3.6.1.4.1.26122.3.'''11'''
 +
|-
 +
|      relay
 +
|1.3.6.1.4.1.26122.3.'''12'''
 +
|-
 +
|'''stentofonMIBConformance'''
 +
|1.3.6.1.4.1.26122.'''4'''
 +
|-
 +
|      stentofonMIBCompliances
 +
|1.3.6.1.4.1.26122.4.'''1'''
 +
|-
 +
|      stentofonMIBGroups
 +
|1.3.6.1.4.1.26122.4.'''2'''
 +
|}
 +
 
 +
<br><br>
 +
 
 +
===ipstation scalar and tabular objects===
 +
{| class="wikitable mw-collapsible"
 +
!'''Name'''
 +
!'''OID'''
 +
!'''Syntax'''
 +
!'''Description'''
 +
|-
 +
!'''general'''
 +
!1.3.6.1.4.1.26122.2.'''1'''
 +
!
 +
!
 +
|-
 +
|softwareVersion
 +
|1.3.6.1.4.1.26122.2.1.'''1'''
 +
|DisplayString (SIZE (0..255))
 +
|The software version
 +
|-
 +
|buttonHangingStatus
 +
|1.3.6.1.4.1.26122.2.1.'''2'''
 +
|Integer32
 +
|Status of the inputs and DAK buttons, the returned number is bitmap where each bit represents hanging status of one input or DAK button in ascending order
 +
|-
 +
|buttonHangingCounter
 +
|1.3.6.1.4.1.26122.2.1.'''3'''
 +
|Counter32
 +
|The number of input or buttons hanging since reboot
 +
|-
 +
|soundTestLastResult
 +
|1.3.6.1.4.1.26122.2.1.'''4'''
 +
|INTEGER { unused(0), error(1), failed(2), success(3) }
 +
|Last status of the sound test
 +
|-
 +
|soundTestFailedCounter
 +
|1.3.6.1.4.1.26122.2.1.'''5'''
 +
|Counter32
 +
|The number of sound tests that failed since reboot
 +
|-
 +
|soundTestErrorCounter
 +
|1.3.6.1.4.1.26122.2.1.'''6'''
 +
|Counter32
 +
|The number of attempts to automatically set the sound pressure level since reboot
 +
|-
 +
|soundTestSuccessCounter
 +
|1.3.6.1.4.1.26122.2.1.'''7'''
 +
|Counter32
 +
|The number of sound tests that were successful since reboot
 +
|-
 +
!'''registration'''
 +
!1.3.6.1.4.1.26122.2.'''2'''
 +
!
 +
!
 +
|-
 +
|registrationTable
 +
|1.3.6.1.4.1.26122.2.2.'''1'''
 +
|SEQUENCE OF RegistrationEntry
 +
|Table of SIP registrations.
 +
|-
 +
|registrationEntry
 +
|1.3.6.1.4.1.26122.2.2.1.'''1'''
 +
|RegistrationEntry
 +
|SIP registration Entry
 +
|-
 +
|regIndex
 +
|1.3.6.1.4.1.26122.2.2.1.1.'''1'''
 +
|Unsigned32
 +
|The SIP registration table index
 +
|-
 +
|serverType
 +
|1.3.6.1.4.1.26122.2.2.1.1.'''2'''
 +
|INTEGER { primary(0), backup(1), backup2(2) }
 +
|Priority of the SIP server
 +
|-
 +
|serverAddress
 +
|1.3.6.1.4.1.26122.2.2.1.1.'''3'''
 +
|DisplayString (SIZE (0..255))
 +
|The address of the SIP server
 
|-
 
|-
−
| '''Name'''
+
|isRegistered
−
| '''Syntax'''
+
|1.3.6.1.4.1.26122.2.2.1.1.'''4'''
−
| '''#'''
+
|INTEGER { notregistered(0), registered(1) }
−
| '''Object IDentifier'''
+
|SIP registration state of the device towards this SIP server
−
| '''Description'''
 
 
|-
 
|-
−
| softwareVersion
+
|lastRegistration
−
| DisplayString
+
|1.3.6.1.4.1.26122.2.2.1.1.'''5'''
−
| 1
+
|DisplayString (SIZE (0..255))
−
| 1.3.6.1.4.1.26122.2.1.1
+
|The time of the last successful registration with this SIP server
−
| The software version
 
 
|-
 
|-
−
| buttonHangingStatus
+
!'''call'''
−
| INTEGER
+
!1.3.6.1.4.1.26122.2.'''3'''
−
| 2
+
!
−
| 1.3.6.1.4.1.26122.2.1.2
+
!
−
| Status of the buttons, 1 means that a button is hanging
 
 
|-
 
|-
−
| buttonHangingCounter
+
|callState
−
| Counter32
+
|1.3.6.1.4.1.26122.2.3.'''1'''
−
| 3
+
|INTEGER { idle(0), inprogress(1), incoming(2), outgoing(3), incancel(4) }
−
| 1.3.6.1.4.1.26122.2.1.3
+
|Call state of the device.
−
| The number of button hanging since reboot
 
 
|-
 
|-
−
| buttonHangingCounter
+
|callRemoteId
−
| Counter32
+
|1.3.6.1.4.1.26122.2.3.'''2'''
−
| 3
+
|DisplayString (SIZE (0..255))
−
| 1.3.6.1.4.1.26122.2.1.3
+
|The SIP-id of the remote party (empty unless device is in a call)
−
| The number of button hanging since reboot
 
 
|-
 
|-
−
| soundTestLastResult
+
|incomingCallAttempts
−
| INTEGER
+
|1.3.6.1.4.1.26122.2.3.'''3'''
−
| 4
+
|Counter32
−
| 1.3.6.1.4.1.26122.2.1.4
+
|The number of incoming call attempts since reboot
−
| Last status of the sound test
 
 
|-
 
|-
−
| soundTestFailedCounter
+
|incomingCallsSuccess
−
| Counter32
+
|1.3.6.1.4.1.26122.2.3.'''4'''
−
| 5
+
|Counter32
−
| 1.3.6.1.4.1.26122.2.1.5
+
|The number of successful incoming calls since reboot
−
| The number of sound tests that failed since reboot
 
 
|-
 
|-
−
| soundTestErrorCounter
+
|incomingCallsFailed
−
| Counter32
+
|1.3.6.1.4.1.26122.2.3.'''5'''
−
| 6
+
|Counter32
−
| 1.3.6.1.4.1.26122.2.1.6
+
|The number of incoming calls that has failed since reboot (unanswered calls are not considered failed)
−
| The number of attempts to automatically set the sound pressure level since reboot
 
 
|-
 
|-
−
| soundTestSuccessCounter
+
|outgoingCallAttempts
−
| Counter32
+
|1.3.6.1.4.1.26122.2.3.'''6'''
−
| 7
+
|Counter32
−
| 1.3.6.1.4.1.26122.2.1.7
+
|The number of outgoing call attempts since reboot
−
| The number of sound tests that were successful since reboot
 
 
|-
 
|-
 +
|outgoingCallsSuccess
 +
|1.3.6.1.4.1.26122.2.3.'''7'''
 +
|Counter32
 +
|The number of successful outgoing calls since reboot
 +
|-
 +
|outgoingCallsFailed
 +
|1.3.6.1.4.1.26122.2.3.'''8'''
 +
|Counter32
 +
|The number of outgoing calls that failed since reboot (unanswered calls are not  considered failed)
 
|}
 
|}
  
 +
<br><br>
  
−
{| class="wikitable"
+
===vsDevice scalar and tabular objects===
−
! colspan="5" | call (1.3.6.1.4.1.26122.2.3)
+
{| class="wikitable mw-collapsible"
 +
!'''Name'''
 +
!'''OID'''
 +
!'''Syntax'''
 +
!'''Description'''
 +
|-
 +
!'''info'''
 +
!1.3.6.1.4.1.26122.3.'''1'''
 +
!
 +
!
 +
|-
 +
|infoPackageVersion
 +
|1.3.6.1.4.1.26122.3.1.'''1'''
 +
|DisplayString(SIZE(128))
 +
|The device Package Version
 +
|-
 +
|infoModelType
 +
|1.3.6.1.4.1.26122.3.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The device Model Type.
 +
|-
 +
|infoModelNumber
 +
|1.3.6.1.4.1.26122.3.1.'''3'''
 +
|Integer32 (0..9999)
 +
|The device Model Number.
 +
|-
 +
|infoAmplifierType
 +
|1.3.6.1.4.1.26122.3.1.'''4'''
 +
|DisplayString(SIZE(128))
 +
|The device Amplifier Type (only for amplifier devices).
 +
|-
 +
|infoKernelVersion
 +
|1.3.6.1.4.1.26122.3.1.'''5'''
 +
|DisplayString(SIZE(128))
 +
|The device Linux Kernel Version
 +
|-
 +
|infoDeviceTreeVersion
 +
|1.3.6.1.4.1.26122.3.1.'''6'''
 +
|DisplayString(SIZE(128))
 +
|The device Device Tree Version.
 +
|-
 +
|infoDisablement
 +
|1.3.6.1.4.1.26122.3.1.'''7'''
 +
|INTEGER { offline(1), online(2) }
 +
|The device Disablement status.
 +
|-
 +
!'''temp'''
 +
!1.3.6.1.4.1.26122.3.'''2'''
 +
!
 +
!
 +
|-
 +
|tempTableCount
 +
|1.3.6.1.4.1.26122.3.2.'''1'''
 +
|Integer32 (0..5)
 +
|Number of Temperature entries in tempTable
 +
|-
 +
|tempTable
 +
|1.3.6.1.4.1.26122.3.2.'''2'''
 +
|SEQUENCE OF TempEntry
 +
|Table of temperature sensors and their values.
 +
|-
 +
|tempEntry
 +
|1.3.6.1.4.1.26122.3.2.2.'''1'''
 +
|TempEntry
 +
|An entry containing a device and its statistics.
 +
|-
 +
|tempIndex
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''1'''
 +
|Integer32 (1..5)
 +
|Reference index for each temperature item
 +
|-
 +
|tempSensorName
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The name of the temperature sensor we are reading.
 +
|-
 +
|tempCurrentString
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''3'''
 +
|DisplayString(SIZE(128))
 +
|The current temperature.
 +
|-
 +
|tempCurrentValue
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''4'''
 +
|Gauge32
 +
|The current temperature of this sensor in the device.
 +
|-
 +
|tempPeakString
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''5'''
 +
|DisplayString(SIZE(128))
 +
|The peak temperature.
 +
|-
 +
|tempPeakValue
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''6'''
 +
|Gauge32
 +
|The peak temperature of this sensor in the device.
 +
|-
 +
|tempAverageString
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''7'''
 +
|DisplayString(SIZE(128))
 +
|The average temperature.
 +
|-
 +
|tempAverageValue
 +
|1.3.6.1.4.1.26122.3.2.2.1.'''8'''
 +
|Gauge32
 +
|The average temperature of this sensor in the device.
 +
|-
 +
!'''fan'''
 +
!1.3.6.1.4.1.26122.3.'''3'''
 +
!
 +
!
 +
|-
 +
|fanTableCount
 +
|1.3.6.1.4.1.26122.3.3.'''1'''
 +
|Integer32 (0..2)
 +
|Number of Fan entries in fanTable.
 +
|-
 +
|fanTable
 +
|1.3.6.1.4.1.26122.3.3.'''2'''
 +
|SEQUENCE OF FanEntry
 +
|Table of fans and their RPM status.
 +
|-
 +
|fanEntry
 +
|1.3.6.1.4.1.26122.3.3.2.'''1'''
 +
|FanEntry
 +
|An entry containing a device and its statistics.
 +
|-
 +
|fanIndex
 +
|1.3.6.1.4.1.26122.3.3.2.1.'''1'''
 +
|Integer32 (1..2)
 +
|Reference index for each observed device.
 +
|-
 +
|fanString
 +
|1.3.6.1.4.1.26122.3.3.2.1.'''2'''
 +
|DisplayString
 +
|The name of the fan sensor we are reading.
 +
|-
 +
|fanValue
 +
|1.3.6.1.4.1.26122.3.3.2.1.'''3'''
 +
|Gauge32
 +
|The rotation speed of the fan in RPM.
 +
|-
 +
!'''voltage'''
 +
!1.3.6.1.4.1.26122.3.'''4'''
 +
!
 +
!
 +
|-
 +
|voltageTableCount
 +
|1.3.6.1.4.1.26122.3.4.'''1'''
 +
|Integer32 (0..20)
 +
|Number of Voltage entries in voltageTable.
 +
|-
 +
|voltageTable
 +
|1.3.6.1.4.1.26122.3.4.'''2'''
 +
|SEQUENCE OF VoltageEntry
 +
|Table of Voltage sensors and their values.
 +
|-
 +
|voltageEntry
 +
|1.3.6.1.4.1.26122.3.4.2.'''1'''
 +
|VoltageEntry
 +
|An entry containing a device and its Voltage statistics.
 +
|-
 +
|voltageIndex
 +
|1.3.6.1.4.1.26122.3.4.2.1.'''1'''
 +
|Integer32 (1..20)
 +
|Reference index for each observed device.
 +
|-
 +
|voltageString
 +
|1.3.6.1.4.1.26122.3.4.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The name of the device we are reading.
 +
|-
 +
|voltageValue
 +
|1.3.6.1.4.1.26122.3.4.2.1.'''3'''
 +
|Gauge32
 +
|The voltage in mV.
 +
|-
 +
!'''power'''
 +
!1.3.6.1.4.1.26122.3.'''5'''
 +
!
 +
!
 +
|-
 +
|powerTable
 +
|1.3.6.1.4.1.26122.3.5.'''1'''
 +
|SEQUENCE OF PowerEntry
 +
|Table of Power sources and their status.
 +
|-
 +
|powerEntry
 +
|1.3.6.1.4.1.26122.3.5.1.'''1'''
 +
|PowerEntry
 +
|An entry containing Power source status.
 +
|-
 +
|powerIndex
 +
|1.3.6.1.4.1.26122.3.5.1.1.'''1'''
 +
|Integer32 (1..2)
 +
|Reference index for each observed Power source.
 +
|-
 +
|powerType
 +
|1.3.6.1.4.1.26122.3.5.1.1.'''2'''
 +
|INTEGER { unknown(1), acPower(2), dcPower(3), poePower(4) }
 +
|The type of the Power source we are reading.
 +
|-
 +
|powerString
 +
|1.3.6.1.4.1.26122.3.5.1.1.'''3'''
 +
|DisplayString(SIZE(128))
 +
|The name of the Power source we are reading.
 +
|-
 +
|powerMonitoring
 +
|1.3.6.1.4.1.26122.3.5.1.1.'''4'''
 +
|INTEGER { unknown(1), notMonitored(2), monitored(3) }
 +
|The Monitoring state of the Power source.
 +
|-
 +
|powerStatus
 +
|1.3.6.1.4.1.26122.3.5.1.1.'''5'''
 +
|INTEGER { unknown(1), notConnected(2), connected(3) }
 +
|The Power source status.
 +
|-
 +
!'''lineIn'''
 +
!1.3.6.1.4.1.26122.3.'''6'''
 +
!
 +
!
 +
|-
 +
|lineInTable
 +
|1.3.6.1.4.1.26122.3.6.'''1'''
 +
|SEQUENCE OF LineInEntry
 +
|Table of Line In & Microphone and their status.
 +
|-
 +
|lineInEntry
 +
|1.3.6.1.4.1.26122.3.6.1.'''1'''
 +
|LineInEntry
 +
|An entry containing a device and its voltage statistics.
 +
|-
 +
|lineInIndex
 +
|1.3.6.1.4.1.26122.3.6.1.1.'''1'''
 +
|Integer32 (1..2)
 +
|Reference index for each Line In.
 +
|-
 +
|lineInMonitoringState
 +
|1.3.6.1.4.1.26122.3.6.1.1.'''2'''
 +
|INTEGER { unknown(1), notMonitored(2), monitored(3) }
 +
|The monitoring state of the Line In or Microphone.
 +
|-
 +
|lineInType
 +
|1.3.6.1.4.1.26122.3.6.1.1.'''3'''
 +
|INTEGER { unknown(1), lineIn1(2), lineIn2(3), microphoneExtern(4),  microphoneIntern(5) }
 +
|The type of the Line In we are reading, either Line In or Microphone.
 +
|-
 +
|lineInString
 +
|1.3.6.1.4.1.26122.3.6.1.1.'''4'''
 +
|DisplayString(SIZE(128))
 +
|The name of the Line In or Microphone we are reading.
 +
|-
 +
|lineInStatus
 +
|1.3.6.1.4.1.26122.3.6.1.1.'''5'''
 +
|INTEGER { unknown(1), lineInOk(2), lineInFail(3), microphoneUnknown(4),  microphoneConnected(5), microphoneDisconnected(6), microphoneShorted(7) }
 +
|The Line In or Microphone status
 +
|-
 +
!'''ampChannel'''
 +
!1.3.6.1.4.1.26122.3.'''7'''
 +
!
 +
!
 +
|-
 +
|ampChannelCount
 +
|1.3.6.1.4.1.26122.3.7.'''1'''
 +
|Integer32 (0..2)
 +
|The total number of Amplifier channels.
 +
|-
 +
|ampType
 +
|1.3.6.1.4.1.26122.3.7.'''2'''
 +
|INTEGER { unknown(1), turbine(2), ena2200(3), ena2400(4), ena2060(5), ena2100(6) }
 +
|Type of Amplifier.
 +
|-
 +
|ampChannelTable
 +
|1.3.6.1.4.1.26122.3.7.'''3'''
 +
|SEQUENCE OF AmpChannelEntry
 +
|Table of Amplifier channels.
 +
|-
 +
|ampChannelEntry
 +
|1.3.6.1.4.1.26122.3.7.3.'''1'''
 +
|AmpChannelEntry
 +
|An entry containing a Amplifier channel.
 +
|-
 +
|ampChannelIndex
 +
|1.3.6.1.4.1.26122.3.7.3.1.'''1'''
 +
|Integer32 (1..2)
 +
|Index into Amplifier channel table.
 +
|-
 +
|ampChannelString
 +
|1.3.6.1.4.1.26122.3.7.3.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The name of the Amplifier channel.
 +
|-
 +
|ampChannelStatus
 +
|1.3.6.1.4.1.26122.3.7.3.1.'''3'''
 +
|INTEGER { unknown(1), notOperative(2), channelOk(3), channelFail(4),  channelShutdown(5), channelGracefulDegradation(6) }
 +
|The Amplifier Channel status.
 +
|-
 +
|ampChannelMonitorStatus
 +
|1.3.6.1.4.1.26122.3.7.3.1.'''4'''
 +
|INTEGER { unknown(1), channelOk(2), channelShorted(3), channelOpen(4),  channelLoadChange(5), channelGroundFault(6), channelRefreshing(7),  channelShutdown(8), channelVoltageLow(9), channelIndecisive(10),  channelInterrupted(11), channelTimeoutFail(12),  channelMonitoringReceiveError(13), channelMonitoringSuspended(14),  channelLineFault(15) }
 +
|The Amplifier Channel status.
 +
|-
 +
!'''letStatus'''
 +
!1.3.6.1.4.1.26122.3.'''8'''
 +
!
 +
!
 +
|-
 +
|letChannel1
 +
|1.3.6.1.4.1.26122.3.8.'''1'''
 +
|
 +
|
 +
|-
 +
|letChannel1Count
 +
|1.3.6.1.4.1.26122.3.8.1.'''1'''
 +
|Integer32 (0..10)
 +
|The total number of configuration enabled LETs in channel 1.
 +
|-
 +
|letChannel1Table
 +
|1.3.6.1.4.1.26122.3.8.1.'''2'''
 +
|SEQUENCE OF LetChannel1Entry
 +
|Table of LETs and their status.
 +
|-
 +
|letChannel1Entry
 +
|1.3.6.1.4.1.26122.3.8.1.2.'''1'''
 +
|LetChannel1Entry
 +
|An entry containing a LET and status.
 +
|-
 +
|letChannel1Index
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''1'''
 +
|Integer32 (1..10)
 +
|The index into this selection of LET data.
 +
|-
 +
|letChannel1Description
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|Descriptive text about the LET we are reading.
 +
|-
 +
|letChannel1OperativeStatus
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''3'''
 +
|INTEGER { unknown(1), notEnabled(2), failed(3), ok(4) }
 +
|The LET status.
 +
|-
 +
|letChannel1SoftwareVersion
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''4'''
 +
|DisplayString(SIZE(20))
 +
|Software Version of the LET.
 +
|-
 +
|letChannel1HardwareVersion
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''5'''
 +
|DisplayString(SIZE(20))
 +
|Hardware Version of the LET.
 +
|-
 +
|letChannel1Voltage
 +
|1.3.6.1.4.1.26122.3.8.1.2.1.'''6'''
 +
|Gauge32 (0..39999)
 +
|Voltage in mV at LET.
 +
|-
 +
|letChannel2
 +
|1.3.6.1.4.1.26122.3.8.'''2'''
 +
|
 +
|
 +
|-
 +
|letChannel2Count
 +
|1.3.6.1.4.1.26122.3.8.2.'''1'''
 +
|Integer32 (0..10)
 +
|The total number of configuration enabled LETs in channel 2
 +
|-
 +
|letChannel2Table
 +
|1.3.6.1.4.1.26122.3.8.2.'''2'''
 +
|SEQUENCE OF LetChannel1Entry
 +
|Table of LETs and their status.
 +
|-
 +
|letChannel2Entry
 +
|1.3.6.1.4.1.26122.3.8.2.2.'''1'''
 +
|LetChannel1Entry
 +
|An entry containing a LET and status.
 +
|-
 +
|letChannel2Index
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''1'''
 +
|Integer32 (1..10)
 +
|The index into this selection of LET data.
 +
|-
 +
|letChannel2Description
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|Descriptive text about the LET we are reading.
 +
|-
 +
|letChannel2OperativeStatus
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''3'''
 +
|INTEGER { unknown(1), notEnabled(2), failed(3), ok(4) }
 +
|The LET status.
 +
|-
 +
|letChannel2SoftwareVersion
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''4'''
 +
|DisplayString(SIZE(20))
 +
|Software Version of the LET.
 +
|-
 +
|letChannel2HardwareVersion
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''5'''
 +
|DisplayString(SIZE(20))
 +
|Hardware Version of the LET.
 +
|-
 +
|letChannel2Voltage
 +
|1.3.6.1.4.1.26122.3.8.2.2.1.'''6'''
 +
|Gauge32 (0..39999)
 +
|Voltage in mV at LET.
 +
|-
 +
!'''controlInput'''
 +
!1.3.6.1.4.1.26122.3.'''9'''
 +
!
 +
!
 +
|-
 +
|controlInputCount
 +
|1.3.6.1.4.1.26122.3.9.'''1'''
 +
|Integer32  (1..6)
 +
|Number of Control Input entries in controlInputTable.
 +
|-
 +
|controlInputTable
 +
|1.3.6.1.4.1.26122.3.9.'''2'''
 +
|SEQUENCE OF ControlInputEntry
 +
|Table of Control Input sensors and their values.
 +
|-
 +
|controlInputEntry
 +
|1.3.6.1.4.1.26122.3.9.2.'''1'''
 +
|ControlInputEntry
 +
|An entry containing a Control Input and its status.
 +
|-
 +
|controlInputIndex
 +
|1.3.6.1.4.1.26122.3.9.2.1.'''1'''
 +
|Integer32 (1..6)
 +
|Reference index for each Control Input.
 +
|-
 +
|controlInputString
 +
|1.3.6.1.4.1.26122.3.9.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The name of the Control Input.
 +
|-
 +
|controlInputStatus
 +
|1.3.6.1.4.1.26122.3.9.2.1.'''3'''
 +
|INTEGER { unknown(1), open(2), closed(3), failShorted(4), failOpen(5) }
 +
|The Control Input status.
 +
|-
 +
|controlInputMonitored
 +
|1.3.6.1.4.1.26122.3.9.2.1.'''4'''
 +
|INTEGER { notMonitored(1), monitored(2) }
 +
|The Control Input Monitored status.
 +
|-
 +
!'''controlOutput'''
 +
!1.3.6.1.4.1.26122.3.'''10'''
 +
!
 +
!
 +
|-
 +
|controlOutputCount
 +
|1.3.6.1.4.1.26122.3.10.'''1'''
 +
|Integer32 (1..6)
 +
|Number of Control Output entries in controlOutputTable.
 +
|-
 +
|controlOutputTable
 +
|1.3.6.1.4.1.26122.3.10.'''2'''
 +
|SEQUENCE OF ControlOutputEntry
 +
|Table of Control Output sensors and their values.
 +
|-
 +
|controlOutputEntry
 +
|1.3.6.1.4.1.26122.3.10.2.'''1'''
 +
|ControlOutputEntry
 +
|An entry containing a Control Output and its status.
 +
|-
 +
|controlOutputIndex
 +
|1.3.6.1.4.1.26122.3.10.2.1.'''1'''
 +
|Integer32 (1..6)
 +
|Reference index for each Control Output.
 +
|-
 +
|controlOutputString
 +
|1.3.6.1.4.1.26122.3.10.2.1.'''2'''
 +
|DisplayString(SIZE(128))
 +
|The name of the Control Output.
 +
|-
 +
|controlOutputStatus
 +
|1.3.6.1.4.1.26122.3.10.2.1.'''3'''
 +
|INTEGER { unknown(1), notActive(2), active(3), failNotActive(4), failActive(5) }
 +
|The Control Output status.
 +
|-
 +
!'''eth'''
 +
!1.3.6.1.4.1.26122.3.'''11'''
 +
!
 +
!
 +
|-
 +
|ethMonitoringTable
 +
|1.3.6.1.4.1.26122.3.11.'''1'''
 +
|SEQUENCE OF EthMonitoringEntry
 +
|Table of Eth Switch Monitoring state.
 +
|-
 +
|ethMonitoringEntry
 +
|1.3.6.1.4.1.26122.3.11.1.'''1'''
 +
|EthMonitoringEntry
 +
|An entry containing an Eth Switch and its Monitoring state.
 +
|-
 +
|ethMonitoringIndex
 +
|1.3.6.1.4.1.26122.3.11.1.1.'''1'''
 +
|Integer32 (1..2)
 +
|Reference index for each Eth Switch Monitored.
 
|-
 
|-
−
| '''Name'''
+
|ethMonitoringString
−
| '''Syntax'''
+
|1.3.6.1.4.1.26122.3.11.1.1.'''2'''
−
| '''#'''
+
|DisplayString(SIZE(128))
−
| '''Object IDentifier'''
+
|The name of the monitored Eth Switch.
−
| '''Description'''
 
 
|-
 
|-
−
| callState
+
|ethMonitoringState
−
| INTEGER
+
|1.3.6.1.4.1.26122.3.11.1.1.'''3'''
−
| 1
+
|INTEGER { unknown(1), notMonitored(2), monitored(3) }
−
| 1.3.6.1.4.1.26122.2.3.1
+
|The Eth Switch Monitoring state.
−
| Call state of the IP station.
 
 
|-
 
|-
−
| callRemoteId
+
!'''relay'''
−
| DisplayString
+
!1.3.6.1.4.1.26122.3.'''12'''
−
| 2
+
!
−
| 1.3.6.1.4.1.26122.2.3.2
+
!
−
| The SIP-id of the remote party (is empty unless station is in a call)
 
−
 
 
|-
 
|-
−
| incomingCallAttempts
+
|relayTable
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.'''1'''
−
| 3
+
|SEQUENCE  OF RelayEntry
−
| 1.3.6.1.4.1.26122.2.3.3
+
|Table of Relay state.
−
| The number of incoming call attempts since reboot
 
 
|-
 
|-
−
| incomingCallsSuccess
+
|relayEntry
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.1.'''1'''
−
| 4
+
|RelayEntry
−
| 1.3.6.1.4.1.26122.2.3.4
+
|An entry containing a Relay and its state.
−
| The number of successful incoming calls since reboot
 
 
|-
 
|-
−
| incomingCallsFailed
+
|relayIndex
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.1.1.'''1'''
−
| 5
+
|Integer32 (1..4)
−
| 1.3.6.1.4.1.26122.2.3.5
+
|Reference index for each Relay monitored.
−
| The number of incoming calls that has failed since reboot (unanswered calls are not considered failed)
 
 
|-
 
|-
−
| outgoingCallAttempts
+
|relayString
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.1.1.'''2'''
−
| 6
+
|DisplayString(SIZE(128))
−
| 1.3.6.1.4.1.26122.2.3.6
+
|The name of the monitored Relay.
−
| The number of outgoing call attempts since reboot
 
 
|-
 
|-
−
| outgoingCallsSuccess
+
|relayIdleMode
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.1.1.'''3'''
−
| 7
+
|INTEGER { unknown(1), normallyClosed(2), normallyOpen(3) }
−
| 1.3.6.1.4.1.26122.2.3.7
+
|Relay idle mode state.
−
| The number of successful outgoing calls since reboot
 
 
|-
 
|-
−
| outgoingCallsFailed
+
|relayDelay
−
| Counter32
+
|1.3.6.1.4.1.26122.3.12.1.1.'''4'''
−
| 8
+
|Integer32 (0..30)
−
| 1.3.6.1.4.1.26122.2.3.8
+
|Delay time (sec) before activation.
−
| The number of outgoing calls that has failed since reboot (unanswered calls are not considered failed)
 
 
|-
 
|-
 +
|relayState
 +
|1.3.6.1.4.1.26122.3.12.1.1.'''5'''
 +
|INTEGER { unknown(1), notActive(2), active(3) }
 +
|Relay state.
 
|}
 
|}
  
−
===Tabular Groups===
+
<br><br>
−
Only tabular value currently used is table of SIP registration. It shows three available SIP server domains and their statuses:
+
 
 +
===Notifications (traps)===
  
−
==SNMP Traps==
+
====Alarm Objects====
−
===Alarm Objects===
+
Each notification (trap) contains Alarm object with following fields
−
Objects that traps contains. All traps have at least one of this objects (currently all traps have all this objects).
 
−
<br>
 
 
{| class="wikitable"
 
{| class="wikitable"
−
! colspan="5" | alarmObjects (1.3.6.1.4.1.26122.2.4)
+
!'''Name'''
 +
!'''OID'''
 +
!'''Syntax'''
 +
!'''Description'''
 +
|-
 +
!'''alarmObjects'''
 +
!1.3.6.1.4.1.26122.2.'''4'''
 +
!
 +
!
 +
|-
 +
|managedObjectClass
 +
|1.3.6.1.4.1.26122.2.4.'''1'''
 +
|DisplayString (SIZE (0..255))
 +
|This object identifies the class of network to which the subject alarm is  related: Stentofon IPStation
 +
|-
 +
|managedObjectInstance
 +
|1.3.6.1.4.1.26122.2.4.'''2'''
 +
|DisplayString (SIZE (0..255))
 +
|This object identifies the instance (of a class) of network resource to which the  subject alarm is related: device hostname
 +
|-
 +
|severity
 +
|1.3.6.1.4.1.26122.2.4.'''3'''
 +
|INTEGER { indeterminate(0), critical(1), major(2), minor(3), warning(4), info(5), cleared(6) }
 +
|The severity of the alarm according to X.733.
 +
|-
 +
|time
 +
|1.3.6.1.4.1.26122.2.4.'''4'''
 +
|DisplayString (SIZE(0..255))
 +
|The timestamp of the alarm as a string: 'Week day MM DD HH.mm.ss YYYY' eg.  Tue Jan 15 19.34.57 2019
 +
|-
 +
|description
 +
|1.3.6.1.4.1.26122.2.4.'''5'''
 +
|DisplayString (SIZE(0..255))
 +
|Specific problem description.
 +
|-
 +
|sysname
 +
|1.3.6.1.2.1.1.5
 +
|DisplayString (SIZE(0..255))
 +
|An administratively-assigned name for this device. NOTE: Not sent when custom  snmpd.conf file is used
 +
|}
 +
 
 +
====Alarm/Fault Notifications (Traps)====
 +
Availability dependent on device mode (ICX/AlphaCom, Edge, SIP, Pulse...) and device type and model
 +
{| class="wikitable mw-collapsible"
 +
!'''Name'''
 +
!'''OID'''
 +
!'''Description'''
 +
|-
 +
!'''alarmNotifications'''
 +
!1.3.6.1.4.1.26122.2.'''5'''
 +
!NOTE: Available only in Edge/SIP/Pulse mode
 +
|-
 +
|ipsStarted
 +
|1.3.6.1.4.1.26122.2.5.'''1'''
 +
|Device has started.
 +
|-
 +
|sipRegistered
 +
|1.3.6.1.4.1.26122.2.5.'''3'''
 +
|Device has successfully registered with a SIP server
 +
|-
 +
|sipRegisterFailed
 +
|1.3.6.1.4.1.26122.2.5.'''5'''
 +
|Device failed to register with a SIP server
 +
|-
 +
|callConnect
 +
|1.3.6.1.4.1.26122.2.5.'''6'''
 +
|Call has connected successfully
 +
|-
 +
|callConnectFailed
 +
|1.3.6.1.4.1.26122.2.5.'''7'''
 +
|Call has failed to connect
 +
|-
 +
|callDisconnect
 +
|1.3.6.1.4.1.26122.2.5.'''8'''
 +
|Call has disconnected
 +
|-
 +
|soundTestSuccess
 +
|1.3.6.1.4.1.26122.2.5.'''10'''
 +
|Sound test was successful
 +
|-
 +
|soundTestFailed
 +
|1.3.6.1.4.1.26122.2.5.'''11'''
 +
|Sound test has failed
 +
|-
 +
|soundTestError
 +
|1.3.6.1.4.1.26122.2.5.'''12'''
 +
|Automatically setting sound pressure level failed
 +
|-
 +
|buttonHanging
 +
|1.3.6.1.4.1.26122.2.5.'''13'''
 +
|Button was pushed for more than 10 seconds without being released
 +
|-
 +
|buttonPressed
 +
|1.3.6.1.4.1.26122.2.5.'''14'''
 +
|Input button was pressed. Trap description will provide more info about input number
 +
|-
 +
|buttonReleased
 +
|1.3.6.1.4.1.26122.2.5.'''15'''
 +
|Input button was released. Trap description will provide more info about input number
 +
|-
 +
|relayActivated
 +
|1.3.6.1.4.1.26122.2.5.'''16'''
 +
|Relay was activated. Trap description will provide more info about relay number
 +
|-
 +
|relayDeactivated
 +
|1.3.6.1.4.1.26122.2.5.'''17'''
 +
|Relay was deactivated. Trap description will provide more info about relay number
 +
|-
 +
|dakPressed
 +
|1.3.6.1.4.1.26122.2.5.'''18'''
 +
|DAK was pressed. Trap description will provide more info about DAK number
 
|-
 
|-
−
| '''Name'''
+
|dakReleased
−
| '''Syntax'''
+
|1.3.6.1.4.1.26122.2.5.'''19'''
−
| '''#'''
+
|DAK was released. Trap description will provide more info about DAK number
−
| '''Object IDentifier'''
 
−
| '''Description'''
 
 
|-
 
|-
−
| managedObjectClass
+
!'''faultNotifications'''
−
| DisplayString
+
!1.3.6.1.4.1.26122.2.'''8'''
−
| 1
+
!NOTE: Available depending on device type and model, eg. amplifier, kit, device has ETH switch...
−
| 1.3.6.1.4.1.26122.2.4.1
 
−
| This object identifies the class of network to which the subject alarm is related, e.g. STENTOFON IP substation
 
 
|-
 
|-
−
| managedObjectInstance
+
|coolingFanFault
−
| DisplayString
+
|1.3.6.1.4.1.26122.2.8.'''1'''
−
| 2
+
|There is a cooling fan fault eg. low speed, not running. Trap description will provide RPM and fan details
−
| 1.3.6.1.4.1.26122.2.4.2
 
−
| This object identifies the instance (of a class) of network resource to which the subject alarm is related, e.g. ipstation26.stentofon.com or 10.12.4.26
 
 
|-
 
|-
−
| severity
+
|missingAmpModule
−
| INTEGER
+
|1.3.6.1.4.1.26122.2.8.'''2'''
−
| 3
+
|Amplifier module is missing
−
| 1.3.6.1.4.1.26122.2.4.3
 
−
| The severity of the alarm according to X.733.
 
 
|-
 
|-
−
| timestamp
+
|psuVoltageFault
−
| DisplayString
+
|1.3.6.1.4.1.26122.2.8.'''3'''
−
| 4
+
|Power supply voltage is not within operational range. Trap description will provide more information about voltage values
−
| 1.3.6.1.4.1.26122.2.4.4
 
−
| The timestamp of the alarm as a string: 'Week day MM DD HH.mm.ss YYYY' e.g. Tue Apr 12 23.58.14 2016
 
 
|-
 
|-
−
| description
+
|lineVoltageFault
−
| DisplayString
+
|1.3.6.1.4.1.26122.2.8.'''4'''
−
| 5
+
|Selected speaker line voltage is not applied.
−
| 1.3.6.1.4.1.26122.2.4.5
 
−
| Specific problem description.
 
 
|-
 
|-
 +
|letFault
 +
|1.3.6.1.4.1.26122.2.8.'''5'''
 +
|Reported only if Line End Transponder (LET) monitoring enabled and configured. LET has failed. Trap description will provide let channel and number
 +
|-
 +
|ampShutdown
 +
|1.3.6.1.4.1.26122.2.8.'''6'''
 +
|Amplifier audio channel is shut down. Trap description will provide details about affected channel
 +
|-
 +
|slmFault
 +
|1.3.6.1.4.1.26122.2.8.'''7'''
 +
|Speaker Line Monitoring (SLM) related fault has occurred. Trap description will provide fault details and affected channel
 +
|-
 +
|fuseBroken
 +
|1.3.6.1.4.1.26122.2.8.'''8'''
 +
|Fuse is broken. Trap description will provide information about affected fuse
 +
|-
 +
|ampDisabled
 +
|1.3.6.1.4.1.26122.2.8.'''9'''
 +
|Amplifier audio channel is disabled. Trap description will provide details about affected channel
 +
|-
 +
|lineInFault
 +
|1.3.6.1.4.1.26122.2.8.'''10'''
 +
|Reported only if Line In monitoring enabled. Line in is disconnected
 +
|-
 +
|rcoFault
 +
|1.3.6.1.4.1.26122.2.8.'''11'''
 +
|Reported only if RCO monitoring enabled. Control output is not set or cleared. Trap description will provide more info about affected output and fault details
 +
|-
 +
|rciFault
 +
|1.3.6.1.4.1.26122.2.8.'''12'''
 +
|Reported only if RCI monitoring enabled. Control input shorted or not connected. Trap description will provide more info about affected input and fault details
 +
|-
 +
|dcPowerFault
 +
|1.3.6.1.4.1.26122.2.8.'''13'''
 +
|Reported only if DC Power monitoring enabled. DC power disconnected
 +
|-
 +
|acPowerFault
 +
|1.3.6.1.4.1.26122.2.8.'''14'''
 +
|Reported only if AC Power monitoring enabled. AC power disconnected
 +
|-
 +
|ethPortDisconnected
 +
|1.3.6.1.4.1.26122.2.8.'''15'''
 +
|Reported only if ETH port monitoring enabled. Ethernet port is disconnected. Trap description will provide more info about affected port number
 +
|-
 +
|micFault
 +
|1.3.6.1.4.1.26122.2.8.'''16'''
 +
|Reported only if mic monitoring is enabled. Microphone is not connected or shorted. Trap description will provide fault details
 +
|-
 +
|missingEmbdr
 +
|1.3.6.1.4.1.26122.2.8.'''17'''
 +
|Panel device is missing EMBDR expansion modules
 +
|-
 +
|swFault
 +
|1.3.6.1.4.1.26122.2.8.'''18'''
 +
|Software daemon has stopped working. Trap description will provide more info about affected daemon
 +
|-
 +
|tempFault
 +
|1.3.6.1.4.1.26122.2.8.'''19'''
 +
|High temperature is detected. Trap description will provide more info about value and affected sensor.
 +
|-
 +
|customFault
 +
|1.3.6.1.4.1.26122.2.8.'''20'''
 +
|Report External Custom Faults. Trap description will provide more info about fault
 
|}
 
|}
  
−
===Groups===
+
====Some example trap descriptions====
 
{| class="wikitable"
 
{| class="wikitable"
−
! colspan="5" | alarmNotifications (1.3.6.1.4.1.26122.2.5)
+
|+
 +
!'''Name'''
 +
!'''Trap description'''
 +
|-
 +
|ethPortDisconnected
 +
|''community=public, enterprise=1.3.6.1.4.1.26122.2.8.15, uptime=7770, agent_ip=10.9.6.223, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2a, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=1, 1.3.6.1.4.1.26122.2.4.4.0="Mon Oct 11 12.22.22 2021''
 +
''", 1.3.6.1.4.1.26122.2.4.5.0="Ethernet Port 2 disconnected"''
 
|-
 
|-
−
| '''Name'''
+
|tempFault
−
| '''Objects'''
+
|''community=public, enterprise=1.3.6.1.4.1.26122.2.8.19, uptime=122149, agent_ip=10.9.6.120, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2b, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=4, 1.3.6.1.4.1.26122.2.4.4.0="Thu Sep  9 07.38.24 2021''
−
| '''#'''
+
''", 1.3.6.1.4.1.26122.2.4.5.0="Temp Sensor Main board, Warning High, measured 65.5C, limit 65.0C"''
−
| '''Object IDentifier'''
 
−
| '''Description'''
 
 
|-
 
|-
−
| ipsStarted
+
|psuVoltageFault
−
| [1,2,3,4,5]
+
|''community=public, enterprise=1.3.6.1.4.1.26122.2.8.3, uptime=2199, agent_ip=10.9.6.223, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2a, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=2, 1.3.6.1.4.1.26122.2.4.4.0="Tue Oct 12 06.59.52 2021''
−
| 1
+
''", 1.3.6.1.4.1.26122.2.4.5.0="Internal Power 50.00  too low_alert, measured 39.80V, limit 45.00V"''
−
| 1.3.6.1.4.1.26122.2.5.1
+
|}
−
| This trap signifies that the IP station has started.
+
 
 +
===Compliance and groups===
 +
 
 +
====Compliance====
 +
{| class="wikitable"
 +
!'''Name'''
 +
!'''OID'''
 +
!'''Content'''
 
|-
 
|-
−
| ipsShutdown
+
!'''stentofonMIBCompliances'''
−
| [1,2,3,4,5]
+
!1.3.6.1.4.1.26122.4.'''1'''
−
| 2
+
!
−
| 1.3.6.1.4.1.26122.2.5.2
 
−
| This trap signifies that the IP station is being shutdown/restarted.
 
 
|-
 
|-
−
| sipRegistered
+
|'''Mandatory Groups'''
−
| [1,2,3,4,5]
+
|
−
| 3
+
|alarmObjectsGroup, sipNotificationsGroup, faultNotificationsGroup, deviceInfoGroup, sipGeneralGroup
−
| 1.3.6.1.4.1.26122.2.5.3
 
−
| This trap signifies that the node has successfully registered with a SIP server.
 
 
|-
 
|-
−
| sipUnregistered
+
|'''Optional Groups'''
−
| [1,2,3,4,5]
+
|
−
| 4
+
|sipRegistrationGroup, sipCallGroup, deviceStatusGroup, audioInputsGroup, controlIOGroup, ethernetGroup, amplifierGroup, letsGroup
−
| 1.3.6.1.4.1.26122.2.5.4
+
|}
−
| This trap signifies that the node has successfully unregistered with a SIP server.
+
 
 +
====Groups====
 +
{| class="wikitable mw-collapsible"
 +
!'''Name'''
 +
!'''OID'''
 +
!'''Content'''
 +
!'''Description'''
 
|-
 
|-
−
| sipRegisterFailed
+
!'''stentofonMIBGroups'''
−
| [1,2,3,4,5]
+
!1.3.6.1.4.1.26122.4.'''2'''
−
| 5
+
!
−
| 1.3.6.1.4.1.26122.2.5.5
+
!
−
| This trap signifies that the node failed to register with a SIP server
 
 
|-
 
|-
−
| callConnect
+
|sipRegistrationGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''1'''
−
| 6
+
|serverType, serverAddress, isRegistered, lastRegistration
−
| 1.3.6.1.4.1.26122.2.5.6
+
|A collection of registration related objects, available only when device is in Edge/SIP/Pulse mode"
−
| This trap signifies that a call has connected successfully
 
 
|-
 
|-
−
| callConnectFailed
+
|sipCallGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''2'''
−
| 7
+
|callState, callRemoteId, incomingCallAttempts, incomingCallsSuccess, incomingCallsFailed, outgoingCallAttempts, outgoingCallsSuccess, outgoingCallsFailed
−
| 1.3.6.1.4.1.26122.2.5.7
+
|A collection of call state related objects, available only when device is in Edge/SIP/Pulse mode
−
| This trap signifies that a call has failed to connect
 
 
|-
 
|-
−
| callDisconnect
+
|sipGeneralGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''3'''
−
| 8
+
|softwareVersion, buttonHangingStatus, buttonHangingCounter, soundTestLastResult, soundTestFailedCounter, soundTestErrorCounter, soundTestSuccessCounter
−
| 1.3.6.1.4.1.26122.2.5.8
+
|A collection of general device info objects available only when device is in Edge/SIP/Pulse mode
−
| This trap signifies that a call has disconnected (normally)
 
 
|-
 
|-
−
| callAbnormalDisconnect
+
|alarmObjectsGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''4'''
−
| 9
+
|managedObjectClass, managedObjectInstance, severity, time, description
−
| 1.3.6.1.4.1.26122.2.5.9
+
|A collection of objects included in all notifications
−
| This trap signifies that a call has disconnected abnormally
 
 
|-
 
|-
−
| soundTestSuccess
+
|sipNotificationsGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''5'''
−
| 10
+
|ipsStarted, ipsShutdown, sipRegistered, sipUnregistered, sipRegisterFailed, callConnect, callConnectFailed, callDisconnect, callAbnormalDisconnect, soundTestSuccess, soundTestFailed, soundTestError, buttonHanging, buttonPressed, buttonReleased, relayActivated, relayDeactivated, dakPressed, dakReleased
−
| 1.3.6.1.4.1.26122.2.5.10
+
|A collection of notifications available only when device is in Edge/SIP/Pulse mode and dependent on device type and model
−
| This trap signifies that the sound test was successful
 
 
|-
 
|-
−
| soundTestFailed
+
|faultNotificationsGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''6'''
−
| 11
+
|coolingFanFault, missingAmpModule, psuVoltageFault, lineVoltageFault, letFault, ampShutdown, slmFault, fuseBroken, ampDisabled, lineInFault, rcoFault, rciFault, dcPowerFault, acPowerFault, ethPortDisconnected, micFault, missingEmbdr, swFault, tempFault, customFault
−
| 1.3.6.1.4.1.26122.2.5.11
+
|A collection of fault monitoring related notifications, availability based on device type and model
−
| This trap signifies that the sound test failed
 
 
|-
 
|-
−
| soundTestError
+
|deviceInfoGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''7'''
−
| 12
+
|infoPackageVersion, infoModelType, infoModelNumber, infoAmplifierType, infoKernelVersion, infoDeviceTreeVersion, infoDisablement
−
| 1.3.6.1.4.1.26122.2.5.12
+
|A collection of device info objects, some fields not available on all device  types
−
|This trap signifies that automatically setting sound pressure level failed
 
 
|-
 
|-
−
| buttonHanging
+
|deviceStatusGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''8'''
−
| 13
+
|tempTableCount, tempSensorName, tempCurrentString, tempCurrentValue, tempPeakString, tempPeakValue, tempAverageString, tempAverageValue, fanTableCount, fanString, fanValue, voltageTableCount, voltageString, voltageValue, powerType, powerString, powerMonitoring, powerStatus
−
| 1.3.6.1.4.1.26122.2.5.13
+
|A collection of device temperature, fan speed, internal voltages and power  status objects, available on amplifier devices
−
| This trap signifies that the button was pushed for more than 10 seconds without being released
 
 
|-
 
|-
−
| buttonPressed
+
|audioInputsGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''9'''
−
| 14
+
|lineInMonitoringState, lineInType, lineInString, lineInStatus
−
| 1.3.6.1.4.1.26122.2.5.14
+
|A collection of audio inputs device objects, available only on devices with microphone or line in monitoring
−
| This trap signifies that the button was pressed
 
 
|-
 
|-
−
| buttonReleased
+
|controlIOGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''10'''
−
| 15
+
|controlInputCount, controlInputString, controlInputStatus, controlInputMonitored, controlOutputCount, controlOutputString, controlOutputStatus, relayString, relayIdleMode, relayDelay, relayState
−
| 1.3.6.1.4.1.26122.2.5.15
+
|A collection of control input and control output (CIO) device objects, available only on devices with CIO monitoring
−
| This trap signifies that the button was released
 
 
|-
 
|-
−
| relayActivated
+
|ethernetGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''11'''
−
| 16
+
|ethMonitoringString, ethMonitoringState
−
| 1.3.6.1.4.1.26122.2.5.16
+
|A collection of Ethernet switch monitoring objects, available on devices with Ethernet switch
−
| This trap signifies that the relay was activated
 
 
|-
 
|-
−
| relayDeactivated
+
|amplifierGroup
−
| [1,2,3,4,5]
+
|1.3.6.1.4.1.26122.4.2.'''12'''
−
| 17
+
|ampChannelCount, ampType, ampChannelString, ampChannelStatus, ampChannelMonitorStatus
−
| 1.3.6.1.4.1.26122.2.5.17
+
|A collection of amplifier info objects
−
| This trap signifies that the relay was deactivated
 
 
|-
 
|-
 +
|letsGroup
 +
|1.3.6.1.4.1.26122.4.2.'''13'''
 +
|letChannel1Count, letChannel1Description, letChannel1OperativeStatus, letChannel1SoftwareVersion, letChannel1HardwareVersion, letChannel1Voltage, letChannel2Count, letChannel2Description, letChannel2OperativeStatus, letChannel2SoftwareVersion, letChannel2HardwareVersion, letChannel2Voltage
 +
|A collection of line end transponder (LET) objects, available only on devices that support LET connections
 
|}
 
|}
  
Line 303: Line 1,157:
 
[[Category:INCA Technical Articles]]
 
[[Category:INCA Technical Articles]]
 
[[Category:Logging]]
 
[[Category:Logging]]
 +
[[Category: IC-EDGE Configuration]]
 +
[[Category: Pulse - Configuration]]
 +
[[Category: SIP intercom - Configuration]]

Latest revision as of 12:41, 12 January 2024

AEIPS.png

Zenitel IP devices run a SNMP service and support SNMP polling and SNMP traps.


Stentofon OID numbers

Zenitel Norway AS has assigned a Private Enterprise Number OID 26122 and the IP-stations use sub OIDs 2,3 and 4.

All Zenitel OIDs definitions can be found in VS-DEVICE-MIB. MIB overview and all OID descriptions are also available at the end of this document.

In addtion to VS-DEVICE-MIB following built in MIBs are also available (not all available for INCA stations): SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB, UDP-MIB, HOST-RESOURCES-MIB, NOTIFICATION-LOG-MIB, DISMAN-EVENT-MIB, DISMAN-SCHEDULE-MIB, UCD-SNMP-MIB, UCD-DEMO-MIB, SNMP-TARGET-MIB, NET-SNMP-AGENT-MIB, HOST-RESOURCES-TYPES, NET-SNMP-PASS-MIB, NET-SNMP-EXTEND-MIB, UCD-DLMOD-MIB, SNMP-MPD-MIB, SNMP-USER-BASED-SM-MIB, SNMP-FRAMEWORK-MIB, SNMP-VIEW-BASED-ACM-MIB, SNMP-COMMUNITY-MIB, IP-FORWARD-MIB, SNMP-NOTIFICATION-MIB, SNMPv2-TM, NET-SNMP-VACM-MIB

SNMP Configuration

SNMP is configured from the station web: Advanced Network > SNMP.

SNMP Configuration


SNMP Settings

  • Access: read or none are available, setting none will disable SNMP
  • SNMP v1/v2c: selects SNMP version used, one or both need to be selected for SNMP to work
  • Community string: string used as password for authentication. Use alphanumeric characters. As from firmware 8.1.3.0 also special characters :$#@_?!,-.*' are allowed.
  • Allowed Network: this is used, together with the network mask, to determine the allowed network for reading the MIB on the station. The IP address is entered in regular dot notation, e.g. 10.5.2.100. For example with an allowed network 10.5.2.0 and a network mask of 24, any station with an IP address in the range 10.5.2.0 to 10.5.2.255 can access the MIB. Setting 0.0.0.0/0 will allow all
  • Name: SNMP name string (sent as sysName OID in traps)
  • Location: SNMP Location string
  • Contact: SNMP Contact string

SNMP Trap and Informs Settings

  • Traps/informs receiving server address can be set here
  • If left blank it will disable sending traps/informs

SNMP Custom Configuration File

  • Custom snmpd.conf file can be uploaded and used on the device
  • File is kept during device SW upgrades
  • File syntax and content are not checked and if errors are present in the file it can render SNMP inoperative
  • When custom file is uploaded SNMP Settings are unavailable
  • File can be viewed or downloaded
  • New file can be uploaded at any time
  • When custom file is deleted, the device will revert back to configuration defined in web config

Enable SNMP Traps

  • Available traps (notifications) depend on device type and mode
  • If specific event occurs and corresponding SNMP Trap is enabled, notification (trap) will be generated and sent to trap/inform receiver IP address
  • Traps descriptions

Custom Faults

Custom faults are available only on ENA amplifiers in Edge/SIP/Pulse or Exigo (configurable through EMT) mode. When RCI is triggered, the device will send SNMP Trap with custom fault description and priority.

Configuration for faults is available in web Amplifier Settings -> RCO/RCI Config (or IO Monitoring). For custom faults to be sent traps have to be enabled in config (Advanced Network → SNMP → Enable SNMP Traps → Custom Fault)

Note icon Available only on ENA amplifiers


Custom faults.png

Object Identifier (OID) Numbers

Zenitel Norway AS OID is 26122 (stentofon) → 1.3.6.1.4.1.26122

Overview

Name OID
ipstation 1.3.6.1.4.1.26122.2
     general 1.3.6.1.4.1.26122.2.1
     registration 1.3.6.1.4.1.26122.2.2
     call 1.3.6.1.4.1.26122.2.3
     alarmObjects 1.3.6.1.4.1.26122.2.4
     alarmNotifications 1.3.6.1.4.1.26122.2.5
     faultNotifications 1.3.6.1.4.1.26122.2.8
vsDevice 1.3.6.1.4.1.26122.3
     info 1.3.6.1.4.1.26122.3.1
     temp 1.3.6.1.4.1.26122.3.2
     fan 1.3.6.1.4.1.26122.3.3
     voltage 1.3.6.1.4.1.26122.3.4
     power 1.3.6.1.4.1.26122.3.5
     lineIn 1.3.6.1.4.1.26122.3.6
     ampChannel 1.3.6.1.4.1.26122.3.7
     letStatus 1.3.6.1.4.1.26122.3.8
          letChannel1 1.3.6.1.4.1.26122.3.8.1
          letChannel2 1.3.6.1.4.1.26122.3.8.2
     controlInput 1.3.6.1.4.1.26122.3.9
     controlOutput 1.3.6.1.4.1.26122.3.10
     eth 1.3.6.1.4.1.26122.3.11
     relay 1.3.6.1.4.1.26122.3.12
stentofonMIBConformance 1.3.6.1.4.1.26122.4
     stentofonMIBCompliances 1.3.6.1.4.1.26122.4.1
     stentofonMIBGroups 1.3.6.1.4.1.26122.4.2



ipstation scalar and tabular objects

Name OID Syntax Description
general 1.3.6.1.4.1.26122.2.1
softwareVersion 1.3.6.1.4.1.26122.2.1.1 DisplayString (SIZE (0..255)) The software version
buttonHangingStatus 1.3.6.1.4.1.26122.2.1.2 Integer32 Status of the inputs and DAK buttons, the returned number is bitmap where each bit represents hanging status of one input or DAK button in ascending order
buttonHangingCounter 1.3.6.1.4.1.26122.2.1.3 Counter32 The number of input or buttons hanging since reboot
soundTestLastResult 1.3.6.1.4.1.26122.2.1.4 INTEGER { unused(0), error(1), failed(2), success(3) } Last status of the sound test
soundTestFailedCounter 1.3.6.1.4.1.26122.2.1.5 Counter32 The number of sound tests that failed since reboot
soundTestErrorCounter 1.3.6.1.4.1.26122.2.1.6 Counter32 The number of attempts to automatically set the sound pressure level since reboot
soundTestSuccessCounter 1.3.6.1.4.1.26122.2.1.7 Counter32 The number of sound tests that were successful since reboot
registration 1.3.6.1.4.1.26122.2.2
registrationTable 1.3.6.1.4.1.26122.2.2.1 SEQUENCE OF RegistrationEntry Table of SIP registrations.
registrationEntry 1.3.6.1.4.1.26122.2.2.1.1 RegistrationEntry SIP registration Entry
regIndex 1.3.6.1.4.1.26122.2.2.1.1.1 Unsigned32 The SIP registration table index
serverType 1.3.6.1.4.1.26122.2.2.1.1.2 INTEGER { primary(0), backup(1), backup2(2) } Priority of the SIP server
serverAddress 1.3.6.1.4.1.26122.2.2.1.1.3 DisplayString (SIZE (0..255)) The address of the SIP server
isRegistered 1.3.6.1.4.1.26122.2.2.1.1.4 INTEGER { notregistered(0), registered(1) } SIP registration state of the device towards this SIP server
lastRegistration 1.3.6.1.4.1.26122.2.2.1.1.5 DisplayString (SIZE (0..255)) The time of the last successful registration with this SIP server
call 1.3.6.1.4.1.26122.2.3
callState 1.3.6.1.4.1.26122.2.3.1 INTEGER { idle(0), inprogress(1), incoming(2), outgoing(3), incancel(4) } Call state of the device.
callRemoteId 1.3.6.1.4.1.26122.2.3.2 DisplayString (SIZE (0..255)) The SIP-id of the remote party (empty unless device is in a call)
incomingCallAttempts 1.3.6.1.4.1.26122.2.3.3 Counter32 The number of incoming call attempts since reboot
incomingCallsSuccess 1.3.6.1.4.1.26122.2.3.4 Counter32 The number of successful incoming calls since reboot
incomingCallsFailed 1.3.6.1.4.1.26122.2.3.5 Counter32 The number of incoming calls that has failed since reboot (unanswered calls are not considered failed)
outgoingCallAttempts 1.3.6.1.4.1.26122.2.3.6 Counter32 The number of outgoing call attempts since reboot
outgoingCallsSuccess 1.3.6.1.4.1.26122.2.3.7 Counter32 The number of successful outgoing calls since reboot
outgoingCallsFailed 1.3.6.1.4.1.26122.2.3.8 Counter32 The number of outgoing calls that failed since reboot (unanswered calls are not considered failed)



vsDevice scalar and tabular objects

Name OID Syntax Description
info 1.3.6.1.4.1.26122.3.1
infoPackageVersion 1.3.6.1.4.1.26122.3.1.1 DisplayString(SIZE(128)) The device Package Version
infoModelType 1.3.6.1.4.1.26122.3.1.2 DisplayString(SIZE(128)) The device Model Type.
infoModelNumber 1.3.6.1.4.1.26122.3.1.3 Integer32 (0..9999) The device Model Number.
infoAmplifierType 1.3.6.1.4.1.26122.3.1.4 DisplayString(SIZE(128)) The device Amplifier Type (only for amplifier devices).
infoKernelVersion 1.3.6.1.4.1.26122.3.1.5 DisplayString(SIZE(128)) The device Linux Kernel Version
infoDeviceTreeVersion 1.3.6.1.4.1.26122.3.1.6 DisplayString(SIZE(128)) The device Device Tree Version.
infoDisablement 1.3.6.1.4.1.26122.3.1.7 INTEGER { offline(1), online(2) } The device Disablement status.
temp 1.3.6.1.4.1.26122.3.2
tempTableCount 1.3.6.1.4.1.26122.3.2.1 Integer32 (0..5) Number of Temperature entries in tempTable
tempTable 1.3.6.1.4.1.26122.3.2.2 SEQUENCE OF TempEntry Table of temperature sensors and their values.
tempEntry 1.3.6.1.4.1.26122.3.2.2.1 TempEntry An entry containing a device and its statistics.
tempIndex 1.3.6.1.4.1.26122.3.2.2.1.1 Integer32 (1..5) Reference index for each temperature item
tempSensorName 1.3.6.1.4.1.26122.3.2.2.1.2 DisplayString(SIZE(128)) The name of the temperature sensor we are reading.
tempCurrentString 1.3.6.1.4.1.26122.3.2.2.1.3 DisplayString(SIZE(128)) The current temperature.
tempCurrentValue 1.3.6.1.4.1.26122.3.2.2.1.4 Gauge32 The current temperature of this sensor in the device.
tempPeakString 1.3.6.1.4.1.26122.3.2.2.1.5 DisplayString(SIZE(128)) The peak temperature.
tempPeakValue 1.3.6.1.4.1.26122.3.2.2.1.6 Gauge32 The peak temperature of this sensor in the device.
tempAverageString 1.3.6.1.4.1.26122.3.2.2.1.7 DisplayString(SIZE(128)) The average temperature.
tempAverageValue 1.3.6.1.4.1.26122.3.2.2.1.8 Gauge32 The average temperature of this sensor in the device.
fan 1.3.6.1.4.1.26122.3.3
fanTableCount 1.3.6.1.4.1.26122.3.3.1 Integer32 (0..2) Number of Fan entries in fanTable.
fanTable 1.3.6.1.4.1.26122.3.3.2 SEQUENCE OF FanEntry Table of fans and their RPM status.
fanEntry 1.3.6.1.4.1.26122.3.3.2.1 FanEntry An entry containing a device and its statistics.
fanIndex 1.3.6.1.4.1.26122.3.3.2.1.1 Integer32 (1..2) Reference index for each observed device.
fanString 1.3.6.1.4.1.26122.3.3.2.1.2 DisplayString The name of the fan sensor we are reading.
fanValue 1.3.6.1.4.1.26122.3.3.2.1.3 Gauge32 The rotation speed of the fan in RPM.
voltage 1.3.6.1.4.1.26122.3.4
voltageTableCount 1.3.6.1.4.1.26122.3.4.1 Integer32 (0..20) Number of Voltage entries in voltageTable.
voltageTable 1.3.6.1.4.1.26122.3.4.2 SEQUENCE OF VoltageEntry Table of Voltage sensors and their values.
voltageEntry 1.3.6.1.4.1.26122.3.4.2.1 VoltageEntry An entry containing a device and its Voltage statistics.
voltageIndex 1.3.6.1.4.1.26122.3.4.2.1.1 Integer32 (1..20) Reference index for each observed device.
voltageString 1.3.6.1.4.1.26122.3.4.2.1.2 DisplayString(SIZE(128)) The name of the device we are reading.
voltageValue 1.3.6.1.4.1.26122.3.4.2.1.3 Gauge32 The voltage in mV.
power 1.3.6.1.4.1.26122.3.5
powerTable 1.3.6.1.4.1.26122.3.5.1 SEQUENCE OF PowerEntry Table of Power sources and their status.
powerEntry 1.3.6.1.4.1.26122.3.5.1.1 PowerEntry An entry containing Power source status.
powerIndex 1.3.6.1.4.1.26122.3.5.1.1.1 Integer32 (1..2) Reference index for each observed Power source.
powerType 1.3.6.1.4.1.26122.3.5.1.1.2 INTEGER { unknown(1), acPower(2), dcPower(3), poePower(4) } The type of the Power source we are reading.
powerString 1.3.6.1.4.1.26122.3.5.1.1.3 DisplayString(SIZE(128)) The name of the Power source we are reading.
powerMonitoring 1.3.6.1.4.1.26122.3.5.1.1.4 INTEGER { unknown(1), notMonitored(2), monitored(3) } The Monitoring state of the Power source.
powerStatus 1.3.6.1.4.1.26122.3.5.1.1.5 INTEGER { unknown(1), notConnected(2), connected(3) } The Power source status.
lineIn 1.3.6.1.4.1.26122.3.6
lineInTable 1.3.6.1.4.1.26122.3.6.1 SEQUENCE OF LineInEntry Table of Line In & Microphone and their status.
lineInEntry 1.3.6.1.4.1.26122.3.6.1.1 LineInEntry An entry containing a device and its voltage statistics.
lineInIndex 1.3.6.1.4.1.26122.3.6.1.1.1 Integer32 (1..2) Reference index for each Line In.
lineInMonitoringState 1.3.6.1.4.1.26122.3.6.1.1.2 INTEGER { unknown(1), notMonitored(2), monitored(3) } The monitoring state of the Line In or Microphone.
lineInType 1.3.6.1.4.1.26122.3.6.1.1.3 INTEGER { unknown(1), lineIn1(2), lineIn2(3), microphoneExtern(4), microphoneIntern(5) } The type of the Line In we are reading, either Line In or Microphone.
lineInString 1.3.6.1.4.1.26122.3.6.1.1.4 DisplayString(SIZE(128)) The name of the Line In or Microphone we are reading.
lineInStatus 1.3.6.1.4.1.26122.3.6.1.1.5 INTEGER { unknown(1), lineInOk(2), lineInFail(3), microphoneUnknown(4), microphoneConnected(5), microphoneDisconnected(6), microphoneShorted(7) } The Line In or Microphone status
ampChannel 1.3.6.1.4.1.26122.3.7
ampChannelCount 1.3.6.1.4.1.26122.3.7.1 Integer32 (0..2) The total number of Amplifier channels.
ampType 1.3.6.1.4.1.26122.3.7.2 INTEGER { unknown(1), turbine(2), ena2200(3), ena2400(4), ena2060(5), ena2100(6) } Type of Amplifier.
ampChannelTable 1.3.6.1.4.1.26122.3.7.3 SEQUENCE OF AmpChannelEntry Table of Amplifier channels.
ampChannelEntry 1.3.6.1.4.1.26122.3.7.3.1 AmpChannelEntry An entry containing a Amplifier channel.
ampChannelIndex 1.3.6.1.4.1.26122.3.7.3.1.1 Integer32 (1..2) Index into Amplifier channel table.
ampChannelString 1.3.6.1.4.1.26122.3.7.3.1.2 DisplayString(SIZE(128)) The name of the Amplifier channel.
ampChannelStatus 1.3.6.1.4.1.26122.3.7.3.1.3 INTEGER { unknown(1), notOperative(2), channelOk(3), channelFail(4), channelShutdown(5), channelGracefulDegradation(6) } The Amplifier Channel status.
ampChannelMonitorStatus 1.3.6.1.4.1.26122.3.7.3.1.4 INTEGER { unknown(1), channelOk(2), channelShorted(3), channelOpen(4), channelLoadChange(5), channelGroundFault(6), channelRefreshing(7), channelShutdown(8), channelVoltageLow(9), channelIndecisive(10), channelInterrupted(11), channelTimeoutFail(12), channelMonitoringReceiveError(13), channelMonitoringSuspended(14), channelLineFault(15) } The Amplifier Channel status.
letStatus 1.3.6.1.4.1.26122.3.8
letChannel1 1.3.6.1.4.1.26122.3.8.1
letChannel1Count 1.3.6.1.4.1.26122.3.8.1.1 Integer32 (0..10) The total number of configuration enabled LETs in channel 1.
letChannel1Table 1.3.6.1.4.1.26122.3.8.1.2 SEQUENCE OF LetChannel1Entry Table of LETs and their status.
letChannel1Entry 1.3.6.1.4.1.26122.3.8.1.2.1 LetChannel1Entry An entry containing a LET and status.
letChannel1Index 1.3.6.1.4.1.26122.3.8.1.2.1.1 Integer32 (1..10) The index into this selection of LET data.
letChannel1Description 1.3.6.1.4.1.26122.3.8.1.2.1.2 DisplayString(SIZE(128)) Descriptive text about the LET we are reading.
letChannel1OperativeStatus 1.3.6.1.4.1.26122.3.8.1.2.1.3 INTEGER { unknown(1), notEnabled(2), failed(3), ok(4) } The LET status.
letChannel1SoftwareVersion 1.3.6.1.4.1.26122.3.8.1.2.1.4 DisplayString(SIZE(20)) Software Version of the LET.
letChannel1HardwareVersion 1.3.6.1.4.1.26122.3.8.1.2.1.5 DisplayString(SIZE(20)) Hardware Version of the LET.
letChannel1Voltage 1.3.6.1.4.1.26122.3.8.1.2.1.6 Gauge32 (0..39999) Voltage in mV at LET.
letChannel2 1.3.6.1.4.1.26122.3.8.2
letChannel2Count 1.3.6.1.4.1.26122.3.8.2.1 Integer32 (0..10) The total number of configuration enabled LETs in channel 2
letChannel2Table 1.3.6.1.4.1.26122.3.8.2.2 SEQUENCE OF LetChannel1Entry Table of LETs and their status.
letChannel2Entry 1.3.6.1.4.1.26122.3.8.2.2.1 LetChannel1Entry An entry containing a LET and status.
letChannel2Index 1.3.6.1.4.1.26122.3.8.2.2.1.1 Integer32 (1..10) The index into this selection of LET data.
letChannel2Description 1.3.6.1.4.1.26122.3.8.2.2.1.2 DisplayString(SIZE(128)) Descriptive text about the LET we are reading.
letChannel2OperativeStatus 1.3.6.1.4.1.26122.3.8.2.2.1.3 INTEGER { unknown(1), notEnabled(2), failed(3), ok(4) } The LET status.
letChannel2SoftwareVersion 1.3.6.1.4.1.26122.3.8.2.2.1.4 DisplayString(SIZE(20)) Software Version of the LET.
letChannel2HardwareVersion 1.3.6.1.4.1.26122.3.8.2.2.1.5 DisplayString(SIZE(20)) Hardware Version of the LET.
letChannel2Voltage 1.3.6.1.4.1.26122.3.8.2.2.1.6 Gauge32 (0..39999) Voltage in mV at LET.
controlInput 1.3.6.1.4.1.26122.3.9
controlInputCount 1.3.6.1.4.1.26122.3.9.1 Integer32 (1..6) Number of Control Input entries in controlInputTable.
controlInputTable 1.3.6.1.4.1.26122.3.9.2 SEQUENCE OF ControlInputEntry Table of Control Input sensors and their values.
controlInputEntry 1.3.6.1.4.1.26122.3.9.2.1 ControlInputEntry An entry containing a Control Input and its status.
controlInputIndex 1.3.6.1.4.1.26122.3.9.2.1.1 Integer32 (1..6) Reference index for each Control Input.
controlInputString 1.3.6.1.4.1.26122.3.9.2.1.2 DisplayString(SIZE(128)) The name of the Control Input.
controlInputStatus 1.3.6.1.4.1.26122.3.9.2.1.3 INTEGER { unknown(1), open(2), closed(3), failShorted(4), failOpen(5) } The Control Input status.
controlInputMonitored 1.3.6.1.4.1.26122.3.9.2.1.4 INTEGER { notMonitored(1), monitored(2) } The Control Input Monitored status.
controlOutput 1.3.6.1.4.1.26122.3.10
controlOutputCount 1.3.6.1.4.1.26122.3.10.1 Integer32 (1..6) Number of Control Output entries in controlOutputTable.
controlOutputTable 1.3.6.1.4.1.26122.3.10.2 SEQUENCE OF ControlOutputEntry Table of Control Output sensors and their values.
controlOutputEntry 1.3.6.1.4.1.26122.3.10.2.1 ControlOutputEntry An entry containing a Control Output and its status.
controlOutputIndex 1.3.6.1.4.1.26122.3.10.2.1.1 Integer32 (1..6) Reference index for each Control Output.
controlOutputString 1.3.6.1.4.1.26122.3.10.2.1.2 DisplayString(SIZE(128)) The name of the Control Output.
controlOutputStatus 1.3.6.1.4.1.26122.3.10.2.1.3 INTEGER { unknown(1), notActive(2), active(3), failNotActive(4), failActive(5) } The Control Output status.
eth 1.3.6.1.4.1.26122.3.11
ethMonitoringTable 1.3.6.1.4.1.26122.3.11.1 SEQUENCE OF EthMonitoringEntry Table of Eth Switch Monitoring state.
ethMonitoringEntry 1.3.6.1.4.1.26122.3.11.1.1 EthMonitoringEntry An entry containing an Eth Switch and its Monitoring state.
ethMonitoringIndex 1.3.6.1.4.1.26122.3.11.1.1.1 Integer32 (1..2) Reference index for each Eth Switch Monitored.
ethMonitoringString 1.3.6.1.4.1.26122.3.11.1.1.2 DisplayString(SIZE(128)) The name of the monitored Eth Switch.
ethMonitoringState 1.3.6.1.4.1.26122.3.11.1.1.3 INTEGER { unknown(1), notMonitored(2), monitored(3) } The Eth Switch Monitoring state.
relay 1.3.6.1.4.1.26122.3.12
relayTable 1.3.6.1.4.1.26122.3.12.1 SEQUENCE OF RelayEntry Table of Relay state.
relayEntry 1.3.6.1.4.1.26122.3.12.1.1 RelayEntry An entry containing a Relay and its state.
relayIndex 1.3.6.1.4.1.26122.3.12.1.1.1 Integer32 (1..4) Reference index for each Relay monitored.
relayString 1.3.6.1.4.1.26122.3.12.1.1.2 DisplayString(SIZE(128)) The name of the monitored Relay.
relayIdleMode 1.3.6.1.4.1.26122.3.12.1.1.3 INTEGER { unknown(1), normallyClosed(2), normallyOpen(3) } Relay idle mode state.
relayDelay 1.3.6.1.4.1.26122.3.12.1.1.4 Integer32 (0..30) Delay time (sec) before activation.
relayState 1.3.6.1.4.1.26122.3.12.1.1.5 INTEGER { unknown(1), notActive(2), active(3) } Relay state.



Notifications (traps)

Alarm Objects

Each notification (trap) contains Alarm object with following fields

Name OID Syntax Description
alarmObjects 1.3.6.1.4.1.26122.2.4
managedObjectClass 1.3.6.1.4.1.26122.2.4.1 DisplayString (SIZE (0..255)) This object identifies the class of network to which the subject alarm is related: Stentofon IPStation
managedObjectInstance 1.3.6.1.4.1.26122.2.4.2 DisplayString (SIZE (0..255)) This object identifies the instance (of a class) of network resource to which the subject alarm is related: device hostname
severity 1.3.6.1.4.1.26122.2.4.3 INTEGER { indeterminate(0), critical(1), major(2), minor(3), warning(4), info(5), cleared(6) } The severity of the alarm according to X.733.
time 1.3.6.1.4.1.26122.2.4.4 DisplayString (SIZE(0..255)) The timestamp of the alarm as a string: 'Week day MM DD HH.mm.ss YYYY' eg. Tue Jan 15 19.34.57 2019
description 1.3.6.1.4.1.26122.2.4.5 DisplayString (SIZE(0..255)) Specific problem description.
sysname 1.3.6.1.2.1.1.5 DisplayString (SIZE(0..255)) An administratively-assigned name for this device. NOTE: Not sent when custom snmpd.conf file is used

Alarm/Fault Notifications (Traps)

Availability dependent on device mode (ICX/AlphaCom, Edge, SIP, Pulse...) and device type and model

Name OID Description
alarmNotifications 1.3.6.1.4.1.26122.2.5 NOTE: Available only in Edge/SIP/Pulse mode
ipsStarted 1.3.6.1.4.1.26122.2.5.1 Device has started.
sipRegistered 1.3.6.1.4.1.26122.2.5.3 Device has successfully registered with a SIP server
sipRegisterFailed 1.3.6.1.4.1.26122.2.5.5 Device failed to register with a SIP server
callConnect 1.3.6.1.4.1.26122.2.5.6 Call has connected successfully
callConnectFailed 1.3.6.1.4.1.26122.2.5.7 Call has failed to connect
callDisconnect 1.3.6.1.4.1.26122.2.5.8 Call has disconnected
soundTestSuccess 1.3.6.1.4.1.26122.2.5.10 Sound test was successful
soundTestFailed 1.3.6.1.4.1.26122.2.5.11 Sound test has failed
soundTestError 1.3.6.1.4.1.26122.2.5.12 Automatically setting sound pressure level failed
buttonHanging 1.3.6.1.4.1.26122.2.5.13 Button was pushed for more than 10 seconds without being released
buttonPressed 1.3.6.1.4.1.26122.2.5.14 Input button was pressed. Trap description will provide more info about input number
buttonReleased 1.3.6.1.4.1.26122.2.5.15 Input button was released. Trap description will provide more info about input number
relayActivated 1.3.6.1.4.1.26122.2.5.16 Relay was activated. Trap description will provide more info about relay number
relayDeactivated 1.3.6.1.4.1.26122.2.5.17 Relay was deactivated. Trap description will provide more info about relay number
dakPressed 1.3.6.1.4.1.26122.2.5.18 DAK was pressed. Trap description will provide more info about DAK number
dakReleased 1.3.6.1.4.1.26122.2.5.19 DAK was released. Trap description will provide more info about DAK number
faultNotifications 1.3.6.1.4.1.26122.2.8 NOTE: Available depending on device type and model, eg. amplifier, kit, device has ETH switch...
coolingFanFault 1.3.6.1.4.1.26122.2.8.1 There is a cooling fan fault eg. low speed, not running. Trap description will provide RPM and fan details
missingAmpModule 1.3.6.1.4.1.26122.2.8.2 Amplifier module is missing
psuVoltageFault 1.3.6.1.4.1.26122.2.8.3 Power supply voltage is not within operational range. Trap description will provide more information about voltage values
lineVoltageFault 1.3.6.1.4.1.26122.2.8.4 Selected speaker line voltage is not applied.
letFault 1.3.6.1.4.1.26122.2.8.5 Reported only if Line End Transponder (LET) monitoring enabled and configured. LET has failed. Trap description will provide let channel and number
ampShutdown 1.3.6.1.4.1.26122.2.8.6 Amplifier audio channel is shut down. Trap description will provide details about affected channel
slmFault 1.3.6.1.4.1.26122.2.8.7 Speaker Line Monitoring (SLM) related fault has occurred. Trap description will provide fault details and affected channel
fuseBroken 1.3.6.1.4.1.26122.2.8.8 Fuse is broken. Trap description will provide information about affected fuse
ampDisabled 1.3.6.1.4.1.26122.2.8.9 Amplifier audio channel is disabled. Trap description will provide details about affected channel
lineInFault 1.3.6.1.4.1.26122.2.8.10 Reported only if Line In monitoring enabled. Line in is disconnected
rcoFault 1.3.6.1.4.1.26122.2.8.11 Reported only if RCO monitoring enabled. Control output is not set or cleared. Trap description will provide more info about affected output and fault details
rciFault 1.3.6.1.4.1.26122.2.8.12 Reported only if RCI monitoring enabled. Control input shorted or not connected. Trap description will provide more info about affected input and fault details
dcPowerFault 1.3.6.1.4.1.26122.2.8.13 Reported only if DC Power monitoring enabled. DC power disconnected
acPowerFault 1.3.6.1.4.1.26122.2.8.14 Reported only if AC Power monitoring enabled. AC power disconnected
ethPortDisconnected 1.3.6.1.4.1.26122.2.8.15 Reported only if ETH port monitoring enabled. Ethernet port is disconnected. Trap description will provide more info about affected port number
micFault 1.3.6.1.4.1.26122.2.8.16 Reported only if mic monitoring is enabled. Microphone is not connected or shorted. Trap description will provide fault details
missingEmbdr 1.3.6.1.4.1.26122.2.8.17 Panel device is missing EMBDR expansion modules
swFault 1.3.6.1.4.1.26122.2.8.18 Software daemon has stopped working. Trap description will provide more info about affected daemon
tempFault 1.3.6.1.4.1.26122.2.8.19 High temperature is detected. Trap description will provide more info about value and affected sensor.
customFault 1.3.6.1.4.1.26122.2.8.20 Report External Custom Faults. Trap description will provide more info about fault

Some example trap descriptions

Name Trap description
ethPortDisconnected community=public, enterprise=1.3.6.1.4.1.26122.2.8.15, uptime=7770, agent_ip=10.9.6.223, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2a, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=1, 1.3.6.1.4.1.26122.2.4.4.0="Mon Oct 11 12.22.22 2021

", 1.3.6.1.4.1.26122.2.4.5.0="Ethernet Port 2 disconnected"

tempFault community=public, enterprise=1.3.6.1.4.1.26122.2.8.19, uptime=122149, agent_ip=10.9.6.120, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2b, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=4, 1.3.6.1.4.1.26122.2.4.4.0="Thu Sep  9 07.38.24 2021

", 1.3.6.1.4.1.26122.2.4.5.0="Temp Sensor Main board, Warning High, measured 65.5C, limit 65.0C"

psuVoltageFault community=public, enterprise=1.3.6.1.4.1.26122.2.8.3, uptime=2199, agent_ip=10.9.6.223, version=Ver2, 1.3.6.1.4.1.26122.2.4.1.0="Stentofon IPStation", 1.3.6.1.4.1.26122.2.4.2.0=zenitel0c0c2a, sysName=Amplifier, 1.3.6.1.4.1.26122.2.4.3.0=2, 1.3.6.1.4.1.26122.2.4.4.0="Tue Oct 12 06.59.52 2021

", 1.3.6.1.4.1.26122.2.4.5.0="Internal Power 50.00  too low_alert, measured 39.80V, limit 45.00V"

Compliance and groups

Compliance

Name OID Content
stentofonMIBCompliances 1.3.6.1.4.1.26122.4.1
Mandatory Groups alarmObjectsGroup, sipNotificationsGroup, faultNotificationsGroup, deviceInfoGroup, sipGeneralGroup
Optional Groups sipRegistrationGroup, sipCallGroup, deviceStatusGroup, audioInputsGroup, controlIOGroup, ethernetGroup, amplifierGroup, letsGroup

Groups

Name OID Content Description
stentofonMIBGroups 1.3.6.1.4.1.26122.4.2
sipRegistrationGroup 1.3.6.1.4.1.26122.4.2.1 serverType, serverAddress, isRegistered, lastRegistration A collection of registration related objects, available only when device is in Edge/SIP/Pulse mode"
sipCallGroup 1.3.6.1.4.1.26122.4.2.2 callState, callRemoteId, incomingCallAttempts, incomingCallsSuccess, incomingCallsFailed, outgoingCallAttempts, outgoingCallsSuccess, outgoingCallsFailed A collection of call state related objects, available only when device is in Edge/SIP/Pulse mode
sipGeneralGroup 1.3.6.1.4.1.26122.4.2.3 softwareVersion, buttonHangingStatus, buttonHangingCounter, soundTestLastResult, soundTestFailedCounter, soundTestErrorCounter, soundTestSuccessCounter A collection of general device info objects available only when device is in Edge/SIP/Pulse mode
alarmObjectsGroup 1.3.6.1.4.1.26122.4.2.4 managedObjectClass, managedObjectInstance, severity, time, description A collection of objects included in all notifications
sipNotificationsGroup 1.3.6.1.4.1.26122.4.2.5 ipsStarted, ipsShutdown, sipRegistered, sipUnregistered, sipRegisterFailed, callConnect, callConnectFailed, callDisconnect, callAbnormalDisconnect, soundTestSuccess, soundTestFailed, soundTestError, buttonHanging, buttonPressed, buttonReleased, relayActivated, relayDeactivated, dakPressed, dakReleased A collection of notifications available only when device is in Edge/SIP/Pulse mode and dependent on device type and model
faultNotificationsGroup 1.3.6.1.4.1.26122.4.2.6 coolingFanFault, missingAmpModule, psuVoltageFault, lineVoltageFault, letFault, ampShutdown, slmFault, fuseBroken, ampDisabled, lineInFault, rcoFault, rciFault, dcPowerFault, acPowerFault, ethPortDisconnected, micFault, missingEmbdr, swFault, tempFault, customFault A collection of fault monitoring related notifications, availability based on device type and model
deviceInfoGroup 1.3.6.1.4.1.26122.4.2.7 infoPackageVersion, infoModelType, infoModelNumber, infoAmplifierType, infoKernelVersion, infoDeviceTreeVersion, infoDisablement A collection of device info objects, some fields not available on all device types
deviceStatusGroup 1.3.6.1.4.1.26122.4.2.8 tempTableCount, tempSensorName, tempCurrentString, tempCurrentValue, tempPeakString, tempPeakValue, tempAverageString, tempAverageValue, fanTableCount, fanString, fanValue, voltageTableCount, voltageString, voltageValue, powerType, powerString, powerMonitoring, powerStatus A collection of device temperature, fan speed, internal voltages and power status objects, available on amplifier devices
audioInputsGroup 1.3.6.1.4.1.26122.4.2.9 lineInMonitoringState, lineInType, lineInString, lineInStatus A collection of audio inputs device objects, available only on devices with microphone or line in monitoring
controlIOGroup 1.3.6.1.4.1.26122.4.2.10 controlInputCount, controlInputString, controlInputStatus, controlInputMonitored, controlOutputCount, controlOutputString, controlOutputStatus, relayString, relayIdleMode, relayDelay, relayState A collection of control input and control output (CIO) device objects, available only on devices with CIO monitoring
ethernetGroup 1.3.6.1.4.1.26122.4.2.11 ethMonitoringString, ethMonitoringState A collection of Ethernet switch monitoring objects, available on devices with Ethernet switch
amplifierGroup 1.3.6.1.4.1.26122.4.2.12 ampChannelCount, ampType, ampChannelString, ampChannelStatus, ampChannelMonitorStatus A collection of amplifier info objects
letsGroup 1.3.6.1.4.1.26122.4.2.13 letChannel1Count, letChannel1Description, letChannel1OperativeStatus, letChannel1SoftwareVersion, letChannel1HardwareVersion, letChannel1Voltage, letChannel2Count, letChannel2Description, letChannel2OperativeStatus, letChannel2SoftwareVersion, letChannel2HardwareVersion, letChannel2Voltage A collection of line end transponder (LET) objects, available only on devices that support LET connections
Retrieved from "https://wiki.zenitel.com/w/index.php?title=SNMP_in_IP_Stations&oldid=235482"