Difference between revisions of "RTSP Settings"

Latest revision as of 15:08, 27 September 2024

Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Zenitel devices support RTSP version 1.0 defined in RFC 2326.

RTSP audio streaming is supported on all devices. In addition video streaming is supported on devices with camera.

Software requirements

RTSP streaming is supported as from Turbine software version 4.11

Authentication

Authentication is required.

The username and password of the device must be included in the url, e.g.: rtsp://<username>:<password>@10.5.102.106:554...

Example: rtsp://admin:alphaadmin@10.5.102.106:554/media/

Audio Streaming

Configuration of Audio Streaming from Non-video intercom devices is done from the RTSP and ONVIF menu in the web interface of the device:

RTSP url - Non-Video Intercom

Audio source - defines what audio signals to send out on the RTSP stream. You can choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent out on the RTSP stream. Options are:

Mic before voice processing (AEC) - Both microphone and speaker signals are sent out to the RTSP stream. The mixing is by acoustic coupling between loudspeaker and microphone.
Mic after voice processing + far end audio - Both microphone and speaker signals are sent out to the RTSP stream. The mixing of the loudspeaker and microphone signals is done electronically. (Option available as from version 9.0.3.0.)
Mic after voice processing (AEC) - Only microphone signal is sent out to the RTSP stream.

Audio and Video Streaming

Default RTSP url

The URL used for Audio and Video Streaming from a Video intercom device is displayed in the Video Settings menu:

Default RTSP url - Video intercom

RTSP url generator

An RTSP url generator is available from the Advanced Video Settings menu. The RTSP url generator allows to configure and use custom RTSP url. The custom RTSP url can be used in parallel with the default RTSP url, but will have a different configuration than the default one

Encoder - which encoder will be used for the video stream, options are H264 and MJPEG
Resolution - Sets the pixel resolution, options are. Supports 240p, 480p, 720p (H264 only) and 1080p (H264 only).
Frames per second - sets the framerate per second. Options are 5fps, 10fps, 15fps (H264 only) , 25fps (H264 only) and 30fps (H264 only)
Bitrate (H264 only) - Sets the bitrate which will be used in video stream. Options are 128, 300, 500, 1000, 1500, 2500, 5000 and 7000kb/s

Click the Copy URI button to copy the generated URI to the clipboard of your laptop.

RTSP settings - Video intercom

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIS}}
-Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Turbine stations support RTSP version 1.0 defined in [https://tools.ietf.org/html/rfc2326 RFC 2326].<br>
+'''Real Time Streaming Protocol (RTSP)''' is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. Zenitel devices support RTSP version 1.0 defined in [https://tools.ietf.org/html/rfc2326 RFC 2326].<br>
-RTSP settings are available on all Turbine stations. All Turbine stations support audio streaming over RTSP and video Turbine stations (TCIV-x) additionally support video streaming over RTSP.
+RTSP audio streaming is supported on all devices. In addition video streaming is supported on devices with camera.
 == Software requirements ==
-RTSP and ONVIF is supported from Turbine software version 4.11
+RTSP streaming is supported as from Turbine software version 4.11
-== Configuration ==
+== Authentication ==
-* '''ICX-AlphaCom mode''': ''Advanced AlphaCcom > RTSP and ONVIF''
+Authentication is required.
-* '''Edge mode''': ''Edge Configuration > RTSP and ONVIF''
-* '''SIP mode''': ''SIP Configuration > RTSP and ONVIF''
+The username and password of the device must be included in the url, e.g.: rtsp://'''<username>:<password>@'''10.5.102.106:554...''
+*Example: rtsp://'''admin:alphaadmin@'''10.5.102.106:554/media/''
 __FORCETOC__
-= Video Intercoms =
+== Audio Streaming==
-'''Supported devices'''
+Configuration of Audio Streaming from Non-video intercom devices is done from the '''RTSP and ONVIF''' menu in the web interface of the device:
-* TCIV
+[[File:RTSP MicOptions.PNG|thumb|left|700px|RTSP url - Non-Video Intercom]]
-* TCIV+/TKIV+
+<br style="clear:both;" />
-[[Image:Tciv+_rtsp_settings.png|thumb|left|700px|RTSP settings]]
+'''Audio source''' - defines what audio signals to send out on the RTSP stream. You can choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent out on the RTSP stream. Options are:
+* '''Mic before voice processing (AEC)''' - Both microphone and speaker signals are sent out to the RTSP stream. The mixing is by acoustic coupling between loudspeaker and microphone.
+* '''Mic after voice processing + far end audio''' -  Both microphone and speaker signals are sent out to the RTSP stream. The mixing of the  loudspeaker and microphone signals is done electronically. (Option available as from version 9.0.3.0.)
+* '''Mic after voice processing (AEC)''' -  Only microphone signal is sent out to the RTSP stream.
+<br>
+== Audio and Video Streaming==
+=== Default RTSP url ===
+The URL used for Audio and Video Streaming from a Video intercom device is displayed in the '''Video Settings''' menu:
+[[Image:RTSP Default URL.PNG|thumb|left|700px|Default RTSP url - Video intercom]]
 <br style="clear:both;" />
-* '''Audio source''' - defines when acoustic echo canceler is applied to mic+speaker voice. With this setting, it is possible to choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent to the RTSP stream. Options are:
-** '''Mic before AEC''' - Both microphone and speaker signals are sent out to RTSP stream
-** '''Mic after AEC''' -  Only microphone signal is sent out to RTSP stream
-===RTSP uri generator===
+===RTSP url generator===
-The RTSP uri generator allows to configure and use custom RTSP URI. The custom RTSP URI can be used in parallel with the default RTSP url, but which will have a different configuration than the default one
+An RTSP url generator is available from the '''Advanced Video Settings''' menu. The RTSP url generator allows to configure and use custom RTSP url. The custom RTSP url can be used in parallel with the default RTSP url, but will have a different configuration than the default one
 * '''Encoder''' - which encoder will be used for the video stream, options are H264 and MJPEG
 * '''Resolution''' - Sets the pixel resolution, options are. Supports 240p, 480p, 720p (H264 only) and 1080p (H264 only).
@@ Line 33: / Line 40: @@
 * '''Bitrate (H264 only)''' - Sets the bitrate which will be used in video stream. Options are 128, 300, 500, 1000, 1500, 2500, 5000 and 7000kb/s
-Click the '''Copy URI''' button to copy the generated URI.
+Click the '''Copy URI''' button to copy the generated URI to the clipboard of your laptop.
-= Non-Video Intercoms =
+[[Image:RTSP Settings Video2.PNG|thumb|left|700px|RTSP settings - Video intercom]]
-[[File:RTSP nonvideo.png|thumb|left|700px|RTSP settings for Non-Video Intercoms]]
 <br style="clear:both;" />
-* '''Audio source''' - defines when acoustic echo canceler is applied to mic+speaker voice. With this setting, it is possible to choose whether only the microphone signal is sent to the RTSP stream or both microphone and speaker signals are sent to the RTSP stream. Options are:
-** '''Mic before AEC''' - Both microphone and speaker signals are sent out to RTSP stream
-** '''Mic after AEC''' -  Only microphone signal is sent out to RTSP stream
 [[Category: Video]]
 [[Category:ONVIF]]