Description of standard DVA files

The zip file with standard DVA messages has the same contents as the SD-card delivered with a Vipedia. Below is a list with descriptions of the different messages.

dva_01.wav - Evac message (Building, Male) - Attention gaining Tone x 7 "Attention please, attention please. Fire has been reported in the building. Please leave the building immediately by the nearest exit."

dva_02.wav - Alert message (Building, Male) - Attention gaining Tone x 4 "May I have your attention please, may I have your attention please. Fire has been reported in the building. This report is being investigated. Please remain at your workplace whilst the fire alert exists."

dva_03.wav - Test Start Message (Building, Male) - “May I have your attention please? May I have your attention please. The fire alarm system is about to be tested. Please take no further action.”

dva_04.wav - Test Finish Message (Building, Male) - “May I have your attention please? May I have your attention please. The fire alarm test is now complete. If you had any difficulty in clearly hearing any part of the message, please advise the main reception.”

dva_05.wav - Public Address System Test Message (Female) - "Public Address System test. This is a test of the Public Address System. This is a functional test for : system operation; loudspeaker coverage; signal level and speech intelligibility."

dva_06.wav - Evac (Building, Female) - "Attention please x2. An incident has been reported. Please leave the building immediately by the nearest point."

dva_07.wav - Alert (Site, Female) - "May I have your attention please x2. An incident has been reported on the site. Please remain at your current location and await further instructions."

dva_08.wav to message dva_60.wav (Male) - Slot number - "Message slot X"

dva_61.wav - 1kHz tone

dva_62.wav - Speech shaped pink noise

dva_63.wav - Pink noise full bandwidth

dva_64.wav - Polarity

dva_65.wav - 1 note chime

dva_66.wav - 2 note chime

dva_67.wav - 3 note chime

dva_68.wav - whoop x 4