Difference between revisions of "DIP"
From Zenitel Wiki
| (3 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{A}} | ||
'''DIP''' is the control protocol used between STENTOFON IP stations and AlphaCom E exchanges. It is used for all data-communication with the IP stations, such as call control, LED settings and display text to the station, and key presses and inputs from the station. | '''DIP''' is the control protocol used between STENTOFON IP stations and AlphaCom E exchanges. It is used for all data-communication with the IP stations, such as call control, LED settings and display text to the station, and key presses and inputs from the station. | ||
DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP). | DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP). | ||
| − | [[Category: | + | See also ACDP message: [[DIP FWD]] |
| − | [[Category: | + | [[Category:INCA Technical Articles]] |
| + | [[Category:Protocols]] | ||
Latest revision as of 13:41, 7 September 2017
DIP is the control protocol used between STENTOFON IP stations and AlphaCom E exchanges. It is used for all data-communication with the IP stations, such as call control, LED settings and display text to the station, and key presses and inputs from the station.
DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP).
See also ACDP message: DIP FWD