Physical layer: Difference between revisions
From Zenitel Wiki
(New page: The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is: • 9600 bit/s (optional 1200, 2400...) |
No edit summary |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s [[Serial port pinout|serial ports]]. | ||
Default port setting is: | Default port setting is: | ||
*9600 bit/s (optional 1200, 2400 or 4800 bit/s) | |||
*8 data bits | |||
*no parity | |||
*one stop bit | |||
In AlphaCom E the protocol can also be encapsulated in TCP/IP. | |||
[[Category:Protocols]] | |||
Latest revision as of 07:23, 8 September 2017
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is:
- 9600 bit/s (optional 1200, 2400 or 4800 bit/s)
- 8 data bits
- no parity
- one stop bit
In AlphaCom E the protocol can also be encapsulated in TCP/IP.