Difference between revisions of "Physical layer"
From Zenitel Wiki
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s serial ports. | + | The physical layer of the ACDP protocol is RS485, RS422 or RS232. The [[device]]s are connected to the exchange’s [[Serial port pinout|serial ports]]. |
Default port setting is: | Default port setting is: | ||
*9600 bit/s (optional 1200, 2400 or 4800 bit/s) | *9600 bit/s (optional 1200, 2400 or 4800 bit/s) | ||
| Line 6: | Line 6: | ||
*one stop bit | *one stop bit | ||
| − | [[Category: | + | In AlphaCom E the protocol can also be encapsulated in TCP/IP. |
| + | |||
| + | [[Category:Protocols]] | ||
Latest revision as of 07:23, 8 September 2017
The physical layer of the ACDP protocol is RS485, RS422 or RS232. The devices are connected to the exchange’s serial ports. Default port setting is:
- 9600 bit/s (optional 1200, 2400 or 4800 bit/s)
- 8 data bits
- no parity
- one stop bit
In AlphaCom E the protocol can also be encapsulated in TCP/IP.