Actions

Difference between revisions of "$CALL command used in AlphaNet (Event Handler)"

From Zenitel Wiki
 
(9 intermediate revisions by 7 users not shown)
Line 1: Line 1:
−
The $CALL command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.<br\> This means that the B-subscriber must be defined in that node as a local or global number.
+
{{AI}}
−
<br\><br\>
+
The [[CALL SETUP|$CALL]] command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.
−
Example:<br\>- An external data device (PC) is connected to node 1 <br\>- Station 1234 is node 2<br\>- Station 5678 is node number 3
+
 
−
<br\><br\>
+
This means that the B-subscriber must be defined in that node as a local or global number.
−
'''$Call L1234 L5678''' will set up the call betwen the stations. Requires that:<br\>- 1234 is defined as global number (83/2) in node 1<br\>- 5678 is defined as global number (83/3) in node 2
+
 
−
<br\><br\>
+
Example:
−
Alternatively:<br\>'''$CALL L1234 L(3)5678''' will set up the call betwen the stations. Requires that:
+
* An external data device (PC) is connected to node 1
−
<br\>- 1234 is defined as global number (83/2) in node 1<br\><br\>$call %2.ref C456
+
* Station 1234 is in node 2
 +
* Station 5678 is in node 3
 +
 
 +
{{Code|$CALL L1234 L5678}}
 +
sets up a call between the stations. Requires that 1234 is defined as global number (83/2) in node 1 and that 5678 is defined as global number (83/3) in node 2
 +
 
 +
 
 +
 
 +
Alternatively:
 +
{{Code|$CALL L1234 L(3)5678}}
 +
sets up a call between the stations. Requires that: 1234 is defined as global number (83/2) in node 1
 +
 
 +
[[Category: Event Handler]]
 +
[[Category: AlphaNet]]

Latest revision as of 09:58, 1 June 2022

AI.png

The $CALL command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.

This means that the B-subscriber must be defined in that node as a local or global number.

Example:

  • An external data device (PC) is connected to node 1
  • Station 1234 is in node 2
  • Station 5678 is in node 3
$CALL L1234 L5678


sets up a call between the stations. Requires that 1234 is defined as global number (83/2) in node 1 and that 5678 is defined as global number (83/3) in node 2


Alternatively:

$CALL L1234 L(3)5678


sets up a call between the stations. Requires that: 1234 is defined as global number (83/2) in node 1

Retrieved from "https://wiki.zenitel.com/w/index.php?title=$CALL_command_used_in_AlphaNet_(Event_Handler)&oldid=229013"