1-1a. Exchange startup (solution): Difference between revisions
From Zenitel Wiki
(Created page with "Text... ===Related articles === * Exchange startup (practice) Category: AlphaCom practice") |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:EX1-1a.PNG|400px|thumb]] | |||
==Practice 1-1a:== | |||
===Cards:=== | |||
*Insert the two ASLT cards in position 1 and 2. | |||
*Insert the AMC-IP card in position 7. | |||
===Power:=== | |||
*Connect the power source to the plug on the back of the exchange, marked ''24 VAC IN'' | |||
*Connect the mains cable to the wall outlet | |||
*Observe the exchange starting | |||
===Coldstart:=== | |||
*Press and hold the coldstart button on the AMC-IP board | |||
*Press the reset button on the power card briefly | |||
*Keep the cold start button pressed at least 2 sec. after reset. | |||
*The AMC status LED will blink green when the boot is ready. | |||
===Related articles === | ===Related articles === | ||
Revision as of 22:50, 26 February 2011
Practice 1-1a:
Cards:
- Insert the two ASLT cards in position 1 and 2.
- Insert the AMC-IP card in position 7.
Power:
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart:
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset.
- The AMC status LED will blink green when the boot is ready.