Difference between revisions of "1-1b. AlphaWeb - Getting started (solution)"
From Zenitel Wiki
(→Configure Ethernet port 1) |
(→Configure filters) |
||
Line 20: | Line 20: | ||
===Configure filters=== | ===Configure filters=== | ||
− | *In AlphaWeb go to ''System Configuration | + | *In AlphaWeb go to ''System Configuration > Filters'' |
*For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro | *For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro | ||
*Press ''Save'' | *Press ''Save'' | ||
*Press ''Apply'' | *Press ''Apply'' | ||
*Press ''Yes'' | *Press ''Yes'' | ||
− | [[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration | + | [[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration > Filters]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 17:23, 1 November 2017
PC Settings
- Configure your computer to have IP address 169.254.1.1
- Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable
Login
- Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
- Default username: admin
- default password: alphaadmin
Configure Ethernet port 1
- In AlphaWeb go to System Configuration -> Interfaces
- Set the IP address on eth1 to 10.1.10.1/16 (.../16 means Subnet Mask = 255.255.0.0)
- Press Validate, then Save & Apply
Configure filters
- In AlphaWeb go to System Configuration > Filters
- For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro
- Press Save
- Press Apply
- Press Yes
Access AlphaWeb via Eth 1
- Configure your computer to have IP address 10.1.10.90
- Connect the PC to the ethernet port 1 of the AlphaCom
- Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser