Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"
From Zenitel Wiki
(→Install and configure the X-Lite SIP client) |
|||
Line 5: | Line 5: | ||
=== Install and configure the X-Lite SIP client=== | === Install and configure the X-Lite SIP client=== | ||
− | * Download | + | * Download from internet http://www.counterpath.com/x-lite.html http://www.counterpath.com/x-lite.html, and install it on the PC |
* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | * Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | ||
* Start the SoftClient, and select '''File''' -> '''Preferences''', and set these parameters: | * Start the SoftClient, and select '''File''' -> '''Preferences''', and set these parameters: |
Revision as of 17:57, 22 March 2011
Install and configure the X-Lite SIP client
- Download from internet http://www.counterpath.com/x-lite.html http://www.counterpath.com/x-lite.html, and install it on the PC
- Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
- Start the SoftClient, and select File -> Preferences, and set these parameters:
- Save Settings
- Select Configure Audio Device to adjust speaker and microphone levels
Configure the AlphaCom XE
- In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom XE
Troubleshooting
- If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations