Difference between revisions of "Forwarding of Call Request to external telephone"
From Zenitel Wiki
(Created page with "This article describes how a Call Request can be forwarded to an external telephone via a SIP Gateway. Two types of forwarding are described: * '''Manually Controlled Forwarding...") |
|||
| Line 1: | Line 1: | ||
| − | This article describes how a Call Request can be forwarded to an external telephone via a SIP Gateway. Two types of forwarding are described: | + | This article describes how a Call Request can be forwarded to an external telephone via a SIP Gateway. Two types of call forwarding are described: |
| − | * ''' | + | * '''Manual call Forwarding:''' The Call Forwarding is switched on and off by the operator by dialling a code or pressing a DAK key. |
| − | * Automatic Call Forwarding | + | * Automatic Call Forwarding: If the Call Request is not answered within a programmable time, the calling station is connected to the telephone |
You can choose to use both types of forwarding, or only one of them. | You can choose to use both types of forwarding, or only one of them. | ||
Revision as of 11:34, 8 November 2011
This article describes how a Call Request can be forwarded to an external telephone via a SIP Gateway. Two types of call forwarding are described:
- Manual call Forwarding: The Call Forwarding is switched on and off by the operator by dialling a code or pressing a DAK key.
- Automatic Call Forwarding: If the Call Request is not answered within a programmable time, the calling station is connected to the telephone
You can choose to use both types of forwarding, or only one of them.
The call to the telephone will be activated only if there is a free telephone line. If all available lines are busy, the system will retry every 5 seconds until a line is free.
There will be no redial if the telephone subscriber is busy. Also there is no option for dialling of alternative telephone numbers.
AlphaNet: The programming described in this document will also work in AlphaNet systems. The calling stations, the queing station and the SIP gateway can be located in the same node or in different nodes in the network.
Software requirement: AMC 11.2.3.3 or newer.